News
New HRP High Resolution Scales in the RADWAG Product Range
Even more accurate, even faster, and even more versatile.
2022-04-29
New PM Precision Balances in the RADWAG Product Range
Lab-worthy precision, industrial-scale application.
2022-04-29
Training for RADWAG Distributors in Mexico
On 28.03.2022. – 01.04.2022 RADWAG distributors from Mexico participated in product training.
2022-04-19
Happy Easter
Dear Clients, Business Partners, Colleagues, and Employees...
2022-04-14
New: AP-12.5Y ELLIPSIS Automatic Device For Multichannel Pipette Calibration
A new device in the RADWAG product range.
2022-04-08
“Scale Editor 2.1” – New Software in RADWAG Product Range
New edition of the “Scale Editor” software.
2022-03-08
Not Sure if Your Moisture Analyzer Works Properly?
A quick and reliable method of verifying the operation of a moisture analyzer using sodium chloride.
2022-02-14
Loads of Technology in the New ELLIPSIS Balances
New series of laboratory balances in RADWAG product range.
2022-02-04
New Year’s wishes
Best wishes for upcoming 2022!
2021-12-31
Merry Christmas
This is what we wish you for the forthcoming Christmas.
2021-12-22
ARABLAB 2021
The most advanced devices manufactured by RADWAG were presented at the international ARABLAB 2021 fair, which took place on 15-17 November 2021 in Dubai.
2021-11-29
SQC Module Now Available for X2 Series Balances
SQC (Statistical Quality Control) – statistical module, used to control the weight of different samples at fixed weighing tolerances.
2021-11-25
Prod & Pack 2021
On 16-18 November 2021, the Prod & Pack exhibition took place in Lyon. RADWAG was represented by our distributor in France – ELCOWA.
2021-11-22
Farmaforum 2021
On 03rd-04th November 2021, an international trade fair, “Farmaforum”, took place in Madrid. RADWAG had the pleasure to participate in this event.
2021-11-16
FORUM LABO 2021
On 5-7 October 2021, RADWAG participated in FORUM LABO 2021, the annual international trade fair intended for laboratory industry. The event took place in Paris, France.
2021-10-25
Physics Lesson with RADWAG
RADWAG organized a physics lesson for 7th grade students of the Integrated Public Elementary School No. 14 in Radom.
2021-10-21
IX International Congress on Combustion Engines in Lublin
On 27-28 September 2021, the 9th edition of the International Congress on Combustion Engines took place in Lublin. RADWAG had the pleasure to participate in this event.
2021-10-19
Novelty in RADWAG Product Range: Set of Holders for Microscale Glassware
The new accessory by RADWAG increases ergonomics and stabilizes measurement conditions in the weighing chamber.
2021-10-11
The HY10 Terminal Can Now Be Programmed in JavaScript
The HY10 weighing terminal manufactured by RADWAG has been adapted to implement JavaScript code.
2021-09-28
PHARMATECH COSMETECH 2021
On 14-16 September 2021, the annual „PHARMATECH COSMETECH” trade fair for pharmaceutical and cosmetic industry took place in Chartres. RADWAG had the pleasure to participate in this event.
2021-09-22
Measurement World 2021
On 07-09 September 2021, RADWAG participated in the "Measurement World" metrology trade fair that took place in Lyon, France.
2021-09-10
RMCM-5 and RMCM-100 – Compact Design of Robotic Mass Comparators
Combination of a mass comparator and a robotic transport system in two versions available in RADWAG product range.
2021-09-06
PUE H315 – New Weighing Terminal in RADWAG Product Range
A robust weighing terminal for the toughest industrial applications is now available.
2021-09-03
RMC 100.1 and RMC 1000.1 – New Models of the Robotic Mass Comparator
World's first combination of an automatic mass comparator and a robotic transport system.
2021-09-02
NANO.AK-4/500 Nano-Comparator, Article Written by RADWAG Experts
The prestigious publishing house, Elsevier, has published a scholarly article on the automatic nano-comparator manufactured by RADWAG.
2021-08-18
Serbian language in 4Y balances from now on
A new facility in RADWAG weighing instruments.
2021-08-13
New balances compliant with 21 CFR Part 11
21 CFR Part 11 Compliance Module in AS X2 PLUS and PS X2 balances.
2021-06-23
PMV 50 PLUS Moisture Analyzer - Application in Sewage Treatment Plants
Why is microwave drying the optimal solution for sewage treatment plants?
2021-06-21
HY10.10.HRP and PUE7.1.10.HRP – industry scales featuring half a million divisions
New devices of unmatched accuracy in RADWAG product range of high resolution scales.
2021-06-17
New: RADWAG Stent Weighing Balances
How do the automatic balance, the microbalance and the ultra-microbalance for stents work?
2021-06-09
Suspended Self-Centring Weighing Pan
Suspended Self-Centring Weighing Pan.
2021-05-31
The AK Robot and Two-Position Comparator In One
How do the new RMC 100.1 and RMC 1000.1 robotic mass comparators work?
2021-05-26
RADWAG on GitHub
GitHub is a platform where you will find a collection of codes to customise our programs to your needs.
2021-05-25
New Approach in Mass Comparators
Webinar for French-Speaking Distributors of RADWAG.
2021-05-21
Radwag-Mass Node-RED Connector
Mass readout from RADWAG balances and scales in Node-RED environment
2021-05-07
PMV 50 PLUS Microwave Moisture Analyzer
The fastest and very accurate method of water content determination.
2021-04-26
RADWAG Dealer Meeting
Webinar summarizing current cooperation and presenting plans for 2021.
2021-03-18
Increase Your Comfort of Filter Weighing
New automatic filter weighing chamber
2021-03-03
LabVIEW Driver
RADWAG programmers have developed LabVIEW "Radwag Balances & Scales" driver.
2021-02-12
Research on PM Particulate Matter Using Gravimetric Method and the RB 2.4Y.F
We invite you to read the publication.
2021-02-12
Visit Our Representative Office in France
Visit RADWAG FRANCE in Cholet
2021-01-29
The NANO.AK-4/500 NANOcomparator - a breakthrough in the comparison of mass standards
Now you can calibrate mass standards much smaller than those described in the OIML!
2021-01-25
New Year's wishes
Best wishes for upcoming 2021.
2020-12-28
WEBINAR: Use of Control Scales
Control scales in production processes.
2020-12-04
Large capacity samples
Container can be used in all Moisture Analyzers
2020-11-19
AS 210.X2 PLUS Analytical Balance
New Max Capacity Even More Possibilities
2020-11-17
AS X2 PLUS Analytical Balances
World's best repeatability of analytical balances.
2020-11-06
Thailand LAB INTERNATIONAL 2020
RADWAG weighing equipment presented at Thailand LAB INTERNATIONAL exhibition in Bangkok.
2020-11-03
CMTExpo 2020
The 2nd International Metrology Measurement Technology and Equipment Exhibition 2020 in Shanghai.
2020-10-13
Analitika Expo 2020
On 22-25 September 2020, a trade fair for laboratory equipment and chemical reagents took place in Moscow.
2020-10-02
PHARMACOSMETECH 2020
Please take a look at the report from the pharmaceutical and cosmetic trade fair.
2020-09-28
LabDays Copenhagen 2020
Trade fair for laboratory technology was held in Copenhagen on 2-3 September 2020.
2020-09-22
New Webinar - Pharma Industry Needs vs. RADWAG Solutions
We kindly invite you to a new webinar on Radwag's solutions compliant with pharmaceutical requirements.
2020-09-10
Programming PUE HY10 in accordance with individual user needs
New application, the 'Extended Web Interface'
2020-09-07
RADWAG Analytical Balances Are Now the Fastest
Stable result is obtained in 1.3 second.
2020-08-28
New Microbalances in RADWAG Product Range
Greater capacity, excellent parameters.
2020-08-25
TECHNICAL SOLUTIONS FOR MEDICAL FACILITIES
Radwag presents a new informative medical scale brochure
2020-08-24
Even Better Parameters of RADWAG Microbalances
Excellent repeatability from 0.15 µg, 0.3 mg minimum weight (USP).
2020-08-14
KOREA LAB 2020
On 27-30.07.2020, an international trade fair for laboratory and analytical equipment took place in Korea.
2020-08-13
Stainless Steel in RADWAG Products
We invite you to take a look at the publication.
2020-08-12
Presentation of RADWAG Product Range
The most interesting solutions for laboratories and industry.
2020-08-07
Smart Display in HY10
The application allows to personalise the scale screen and display it on a computer.
2020-07-29
Smart Editor in HY10
The application is launched in the computer browser and hosted on the HY10 terminal.
2020-07-29
New Catalogue of 4Y Balances
We invite you to read the latest publication on 4Y series balances.
2020-06-25
Metrology in Air Quality Research
Watch presentations from Radwag Webinar on modern technological solutions in air quality research.
2020-06-19
New Series of Webinars
We would like to invite you to a new series of webinars covering cutting-edge technological solutions for weighing industry.
2020-05-13
Automatic Balance for Filter Weighing – AK-6 4Y.F
The balance guarantees the best repeatability impossible to be obtained in case of manual weighing.
2020-03-16
Seminar in Almaty, Kazakhstan
On 28 February, 2020 a seminar on mass measurement error took place.
2020-03-13
UMA 4Y F – Automatic Filter Mass Measurement
The device guarantees measurement accuracy of 1 μg or 0.1 μg.
2020-03-12
RADWAG a friend of animals!
Platform scale in an animal shelter.
2020-03-04
Saudi Print & Pack Expo
RADWAG products were presented on the international exhibition that took place in Saudi Arabia.
2020-02-12
New professional-class balances - XA 4Y.M PLUS and XA 4Y PLUS
The best minimum weight value.
2020-02-06
Video Presenting the New AS X2 PLUS Analytical Balance
Reliability, accuracy and precision of mass measurement.
2020-02-05
High Resolution Platforms with ATEX Certificate
The devices are intended for operation in zones 2/22 classified by ATEX.
2020-01-27
„From CIR to Industry 4.0” Conference
Event organized under the auspices of the President of the Republic of Poland
2020-01-22
Vehicle weighing function in PUE HX7
The “Vehicle weighing” working mode enables to weigh lorries and calculate mass of the load on the basis of weighing carried out on the entry and at the exit.
2020-01-09
Merry Christmas and a Happy New Year
Let these special days be filled with kindness and joy
2019-12-23
NEW - AS X2 PLUS and AS R2 PLUS analytical balances of SYNERGY LAB line
A wide range of innovative construction and system solutions for advanced- and standard-class instruments.
2019-12-20
Expanded SYNERGY LAB Line – New MYA 4Y PLUS and UYA 4Y PLUS Balances
The latest devices are intended for the most challenging applications.
2019-12-18
National Healthcare Expo 2019
RADWAG presented products intended for the healthcare sector.
2019-12-06
Meeting in the National Institute of Standards in Cairo
The main subject of the meeting was the redefinition of the kilogram and legal regulations concerning mass metrology.
2019-12-05
Scale Editor 2.0
The software enables operation of C315, WTC and WLC weighing instruments using a computer.
2019-12-05
„New era of weighing in pharma 2019” Conference
RADWAG as an expert.
2019-12-05
RADWAG Metrology Day in Manila
Seminar intended for employees of the Philippine Central Office of Measures, and private laboratories.
2019-12-03
EUROPACK EUROMANUT CFIA 2019, Lyon, France
This year's edition gathered almost 17 000 visitors and 650 domestic and foreign exhibitors.
2019-11-29
A new upgraded model of the DWR rotational checkweigher
Throughput of even 160pcs/min.
2019-11-27
Video on Dealer Training Days 2019
We would like to invite you to watch the event footage.
2019-11-26
X International Beremzhanovsky Congress of Chemists
The event was organised by Al-Farabi University in Kazakhstan
2019-11-20
BCEIA Trade Fair in Beijing
During the exhibition the latest devices of SYNERGY LAB line were presented.
2019-11-12
Presentation of the SYNERGY LAB line in Korea
The meeting was organized by Hansung, RADWAG distributor.
2019-11-08
„New era of weighing in pharma 2019” conference
The event will take place in Cairo, Egypt.
2019-11-07
Distributor Meeting in Czech
The latest products and plans for the future were presented.
2019-11-06
November Full of Events - Let's Meet!
We kindly invite you to visit our stand.
2019-11-04
Agrena 2019 international exhibition in Egypt
International Exhibition for the Management and Production of Poultry, Livestock and Fish.
2019-10-31
RADWAG at Radomski Festiwal Kariery [Radom Career Festival]
Radomski Festiwal Kariery was organized by Biuro Obsługi Radomskiej Strefy Gospodarczej Urzędu Miejskiego w Radomiu [Customer Service Office of Radom Economic Zone of Radom City Council].
2019-10-30
RADWAG a winner of "Radomski Laur Techniki" ['Radom Technology Laurel'] award
The awards were granted during the XXXI Radomskie Dni Techniki [XXXI Radom Technology Days].
2019-10-24
RB 2.4Y.F Filter Weighing Robot
Automatic filter weighing.
2019-10-18
MINING & METALS CENTRAL ASIA 2019
Last month in Kazakhstan an event devoted to technology intended for mining and metallurgy was organized.
2019-10-17
International Trade Fair POLAGRA TECH 2019
During the event the latest version of the PUE HX7 weighing terminal was demonstrated for the first time.
2019-10-14
MAGHREB PHARMA EXPO 2019
From 1st to 3rd October 2019, in Algeria, the greatest in North Africa pharmaceutical industry exhibition was held, MAGHREB PHARMA EXPO 2019.
2019-10-10
Thailand LAB INTERNATIONAL 2019
The 9th edition of the event focused on the laboratory equipment, laboratory technology, biotechnology, life science, chemicals and safety.
2019-10-07
RADWAG Asian Training Days
The training gathered distributors from East and South-East Asia.
2019-10-04
CIM 2019 & Measurement World
On 24-26.09.2019 RADWAG participated in CIM 2019 International Metrology Congress and Measurement World trade fair in Paris.
2019-10-03
Let's meet in October!
Visit our booth during the October conferences and trade shows.
2019-09-30
Distributors Meeting in Miami
The seminar purpose was both to inform and educate the participants.
2019-09-19
RADWAG in the Office of Measures in Mexico
The meeting was a good opportunity to present RADWAG and to exchange experience.
2019-09-18
II Tour of POLLAB Symposium
As every year, RADWAG participated in both tours of XXV POLLAB Club Symposium.
2019-09-16
PTChem 2019
On 2-6 September 2019 RADWAG participated the 62. Zjazd Naukowy Polskiego Towarzystwa Chemicznego (62. Science Congress of Polish Chemistry Association).
2019-09-13
Let's meet in September!
Visit our booth during September conferences and branch events.
2019-08-30
21 CFR Part 11 in Checkweighers
The DWM and DWT/RC checkweighers now feature implemented 21 CFR part 11 compliance module.
2019-08-19
New R Panel functions
Access to all keys and functions that are to be found on an operation panel of R and WTC balances, weighing instruments based on C315 indicator, MAS R and MPS R weighing modules.
2019-08-01
analytica Lab Africa
During the event, new technological developments with regard to laboratory equipment were exhibited.
2019-07-22
RADWAG at InterWeighing2019 in China
The event took place on 10 – 12 July 2019 in Shanghai.
2019-07-15
Pharmaceutical seminar in Saudi Arabia
The event was organized by RADWAG distributor, Safe Arabia.
2019-07-14
A visit to the Emirates Metrology Institute
RADWAG representatives had the opportunity to discuss mass measurement and the redefinition of the kilogram.
2019-07-12
IECEx Certificate for PUE HX5.EX, PM01.EX, IM01.EX
IECEx certificate confirms that the device issued with it can be operated in hazardous areas.
2019-07-10
Automatic Multi-Track DWM H2 Scale
The scale is equipped with multiple tracks integrated into one construction, the tracks are operated via one operation panel.
2019-07-02
Palexpo Geneva 2019
Precision mechanics, watchmaking, microtechnology, environmental protection and medical technologies exhibition.
2019-07-02
Dealer Training in Radom
Watch the Dealer Training footage
2019-06-28
RADWAG pharmaceutical seminar in Hyderabad, India
The event was intended for representatives of pharmaceutical industry.
2019-06-21
New scales with PUE HX7 terminal
Advanced technology and high ingress protection class of the PUE HX7 indicator enable its use in harsh industrial conditions.
2019-06-10
A new industrial indicator PUE C315
A new industrial indicator PUE C315 – ease of operation and versatility of use
2019-06-07
58th Conference organised by ČKS
On 14-15 May 2019, ČKS conference on practical metrology took place.
2019-06-05
SYNERGY LAB Line – New Quality in Small Mass Weighing
Innovative solutions guarantee the best precision, repeatability and reliability in various laboratory conditions.
2019-06-04
RADWAG at WOD-KAN 2019, the water supply and sewage systems fair
RADWAG presented its range of analytical and precision balances and moisture analyzers.
2019-05-31
XXV Pollab Symposium
During the XXV Symposium, issues regarding implementation of requirements imposed by the PN-EN ISO/IEC 17025:2018 standard were discussed.
2019-05-27
Medical symposium CannaCiencia in Colombia
Two RADWAG dealers participated in the symposium presenting our latest solutions for mass measurement.
2019-05-22
Analitika Expo in Moscow
RADWAG and THNL, our representative in the Russian Federation, participated in Analitika Expo, the biggest exhibition in Russia.
2019-05-10
Transfer of data from PUE HY10 terminal to the FTP server
HY10 scale allows the user to configure weighing data in JSON format.
2019-05-09
Korea Lab in Seoul
RADWAG and Hansung, our dealer for Korean market, has once again participated in this international event.
2019-04-26
Expanded UYA 4Y and MYA 4Y functionality - filter weighing
Thanks to an innovative mechanical design , the functionality of the UYA 4Y ultra-microbalance and MYA 4Y microbalance has been expanded.
2019-04-23
Wi-Fi® as a standard solution in moisture analyzers of R series
Standard version of moisture analyzers of R series have been fitted with new communication interface.
2019-04-18
MV Test Set
Professional verification of RADWAG-designed moisture analyzer operation.
2019-04-17
RADWAG Advanced Weighing Technologies - Corporate Video
We would like to invite you to watch a video about RADWAG.
2019-04-10
Moisture Analyzer Operation Test - Publication
Sodium chloride as a reference material recommended for verification of moisture analyzer operation.
2019-04-05
Forum LABO Paris 2019
On 26 - 28 March 2019, the greatest trade fair for laboratory equipment, Forum LABO Paris 2019, took place in France.
2019-03-31
A brand new stainless steel chamber in MYA 4Y.F and UYA 4Y.F
Stainless steel detachable weighing chamber
2019-03-26
Training in Laboratory Product Range in Brasil
On 19 - 21 March, RADWAG experts gave Toldo do Brazil, our distributor, training in laboratory product range.
2019-03-26
IECEx Certificate for RADWAG-Designed Equipment Intended For Hazardous Areas
The certificate enables authorized bodies to obtain local certificates.
2019-03-25
CFIA 2019
On 12 - 14 March 2019 in Rennes, France, the greatest trade fair intended for food industry took place.
2019-03-23
ARABLAB 2019 in Dubai
RADWAG had a pleasure to present its latest range of laboratory balances at the international ARABLAB Trade Show that took place on 12 – 14 March 2019 in Dubai.
2019-03-21
EuroLab CrimeLab 2019 Trade Fair
This year RADWAG microbalance for filters, the MYA 5.4Y.F, won the award in a competition for the Trade Fair Best Offer in 'Measuring Equipment for Laboratory' category.
2019-03-20
Imam University Day of Chemistry Expo 2019
On 05.02.2019, Day of Chemistry organized by Imam University took place in Riyadh Saudi Arabia.
2019-03-18
Metrology Symposium – Panel Discussion Summary
Discussion in which acknowledged experts from world leading metrology institutions took part, enabled to form crucial conclusions regarding current changes in mass metrology and redefinition of standards of SI system units.
2019-03-15
Comprehensive management of the calibration process - RMCS PC software
The RMCS system manages the whole calibration process, starting from the moment the order is placed, through procedure performance, to the moment of issuing the calibration certificate.
2019-03-14
Metrology Symposium: Traceability in Mass Metrology
Second Edition: Future and New Solutions
2019-03-13
RADWAG expert presents the hi-tech features of the AVK-1000 vacuum mass comparator
The AVK-1000 measures weight value of mass standards and silicone spheres of 100 mm diameter maximum either in vacuum or in noble gases.
2019-03-12
Video presenting operation of the RMC robotic mass comparator
RMC robotic mass comparator offers fully automated process of mass standard calibration.
2019-03-12
DJAZAGRO 2019
On 25 - 28 February in Algiers, the capital city of Algeria, DJAZAGRO, the greatest trade show for food industry in North Africa took place.
2019-03-01
Asia Pharma Expo 2019
11th International Exhibition on South Asian Pharmaceutical Industry
2019-02-27
RMC Robotic Mass Comparator
The latest line of RMC robotic mass comparators guarantees full automation of mass standards calibration ranging from 1 mg to 1 kg.
2019-02-25
Metrology Symposium 6-7 March 2019
RADWAG is excited to inform you that on March 6-7 2019 we and the ČMI Czech will host a "Metrology Symposium" that will take place at RADWAG headquarters in Radom.
2019-02-18
Seminar in Ukraine
"Popularly about Metrology - Professionally about Weighing Equipment"
2019-02-17
PUE HX7 Indicator
The indicator allows to design multifunctional 1 or 4-load cell scales operating under harsh industry conditions.
2019-02-07
Microwave and Infrared Radiation in Determination of Dry Mass Content in Organic Matter of Waste Water Sludge
PMV 50 microwave moisture analyzer manufactured by RADWAG is a device providing fast and reliable measurement – read an article about the PMV 50.
2019-02-04
Determination of food product’s water content performed using MA.X2 and PMV moisture analyzers
We would like to invite you to read the publication by Sławomir Janas, the Manager of the Testing Laboratory in RADWAG, on the determination of food products' water content.
2019-01-22
AGV-4/1000 Automatic Comparator
Determination of mass standard's density and volume.
2019-01-09
Merry Christmas and a Happy New Year
May your Christmas be merry, filled with peace and laughter,
May it be a fruitful time for you, your family and your friends,
May the New Year be full of prosperity and blessings.
2018-12-21
LOAD LOCK – system aiding the AVK-1000 vacuum mass comparator operation
The system significantly shortens the process of providing the right vacuum value to up to 5 hours counting from the moment of device start-up.
2018-12-14
Saudi International Pharma Expo & Saudi Medlab Expo 2018
On 19 - 21 November 2018, International Trade Fair for Laboratory Technology, Analysis, Biotechnology and Diagnostics took place in Riyadh, Saudi Arabia.
2018-12-14
Training for distributors from Saudi Arabia
On 18 November lectures and workshops concerning RADWAG products and functional metrology took place in Riyadh, Saudi Arabia.
2018-12-13
ALL4PACK Paris
On 26-29 November 2018, ALL4PACK trade fair took place in France.
2018-12-12
Redefinition of the Kilogram - a Revolutionary Change of the SI System
A new definition of the kilogram comes into force in May 2019!
2018-11-30
Formulations in PUE C32 and PUE HX5.EX Indicators
The software of PUE C32 and PUE HX5.EX indicators now features 'Formulations' function.
2018-11-29
Implementation of Control System in Spain
System of 49 weighing instruments was integrated using the E2R Weighing module.
2018-11-27
ChemShow Eurasia 2018
On 8-10 November 2018, ChemShow Eurasia 2018 took place in Istanbul, Turkey.
2018-11-23
RADWAG as a sponsor of the 'Effective Sales Support Techniques' Conference
On the occasion of Global Entrepreneurship Week, on 14 November 2018, the 'Effective Sales Support Techniques' Conference took place in Radom.
2018-11-23
Training for Distributors from Southern Spain
Lectures and workshops on issues related to RADWAG products and functional metrology.
2018-11-23
RCloud
RCloud is a RADWAG service that enables access to results stored in a cloud.
2018-11-19
Analytica China 2018
9th International Trade Fair for Laboratory Technology, Analysis, Biotechnology and Diagnostics.
2018-11-09
Distributors Meeting in China
On 28-29 October 2018, an annual RADWAG distributors meeting for local dealers took place in Suzhou, China.
2018-11-08
Agrena 2018
On 25-27 October 2018, our representative for the Egyptian market, El-Safwa Est., participated in the Agrena 2018 trade fair that took place in Cairo.
2018-11-07
RADWAG Print Studio
The main advantage of RADWAG Print Studio is the possibility to share multiple printers and weighing instruments within a local network.
2018-11-07
Analytical Seminar MS Spektrum 2018
On 24-26 October, 2018, a seminar for laboratory analysts took place in Zakopane, Poland.
2018-11-06
Compliance of E2R Weighing Records with 21 CFR part 11
The system is now expanded with new functions that secure and monitor work carried out by different operators.
2018-11-05
Annual Dealer Meeting 2018
On 16-18 October 2018, RADWAG dealer meeting took place in our headquarters in Radom.
2018-10-23
A new version of the advanced PUE 5 weighing indicator
PUE 5 indicator is equipped with new hardware of improved performance
2018-10-09
DWM HPX Checkweigher
Reliable operation in extremely harsh conditions.
2018-10-09
POLAGRA-TECH 2018
On 1 - 4 October 2018, RADWAG participated in the International Trade Fair of Food Processing Technologies POLAGRA-TECH that took place in Poznań.
2018-10-09
PMV 50 Microwave Moisture Analyzer
Advanced solution for measurement of moisture content of samples containing significant amount of moisture (8-100%).
2018-10-08
CFIA MAROC Trade Fair for Industry
It was a second time when RADWAG's dealer, ELCOWA INDUSTRIE, represented our company at CFIA MAROC.
2018-10-05
RADWAG at MAGHREB PHARMA
On 17 - 19 September 2018, the third edition of MAGHREB PHARMA 2018 took place in Algiers.
2018-09-27
Profinet in HY10 Indicator
Advanced-class HY10 indicator is now equipped with a new interface for industry applications - Profinet.
2018-09-24
XXIV Symposium of the POLLAB Club
This year, issues regarding new PN-EN ISO/IEC 17025:2018 standard were discussed.
2018-09-21
RADWAG Data Access in HY10 software
RDA module enables establishing connection between the weighing instrument and customer system in an uncomplicated way
2018-09-17
Full-Empty and Empty-Full Control in 3Y/4Y Balances
SQC mode for statistical quality control in 3Y/4Y balances now features a new function: full-empty and empty-full control.
2018-09-10
New Precision Balances in RADWAG Product Range
RADWAG introduces new high capacity precision balances based on 
MONO
BLOCK technology. 2018-08-31
Smart Select - Product Identification by Mass
The new 'Smart Select' function, available for weighing instruments equipped with HY10 indicator, enables product identification by its mass.
2018-08-28
Summer Indian-Pharma Tour
On 17-26 July, 2018 RADWAG, together with LCGC company, visited 14 different pharmaceutical companies.
2018-08-28
PROFIBUS in IM01.EX Communication Module
The IM01.EX-* module can now be equipped with PROFIBUS interface for industrial applications.
2018-08-24
Integration of E2R and SAP
RADWAG designs and implements IT solutions enabling automation of communication between weighing systems operating on the basis of E2R and SAP software.
2018-08-14
DWM HPE Labelling Checkweigher
For the food industry where there is a need to mark packaged products of variable masses.
2018-08-01
Dosing in PUE C32 and PUE HX5.EX Indicators
DOSING - new working mode of PUE C32 and PUE HX5.EX indicators
2018-07-31
Granulate Density Determination Kit
RADWAG introduces granulate density determination kit
2018-07-26
A Visit to Sri Lanka
On 9-13 July, 2018 RADWAG representatives visited Sri Lanka.
2018-07-19
Pre-Packaged Goods Control - software update
The modification has been implemented in all PGC weighing instruments and E2R PGC software.
2018-07-13
Labelling in PUE C32 and PUE HX5.EX Indicators
The software of PUE C32 and PUE HX5.EX indicators now features 'Labelling' option.
2018-07-12
RADWAG in Australia
On 18-28 June, 2018, RADWAG representatives visited Australia to present laboratory balances and industry scales.
2018-07-10
Gravitational Liquid Dosing
One of the standard functions of modern weighing indicator is dosing, i.e. the control over filling of the packaging with a product.
2018-07-06
New WPT/4N/H.LD 4 Load Cell Ramp Scale
RADWAG introduces a new series of WPT/4N/H.LD ramp scales.
2018-07-06
Audit Trail Reader
Freeware Audit Trail Reader is a RADWAG-designed software supporting Audit Trail function that is available for 3Y, 4Y, HY10, WLY, WPY series weighing instruments.
2018-07-04
BRIA Conference in Wroclaw
RADWAG as a sponsor of Biotechnology Conference: Research and Industrial Applications
2018-06-29
'Workflow' - New Function of E2R System
E2R software for industry has been updated with a new function - 'Workflow'.
2018-06-21
KonTeCh 2018
RADWAG as a sponsor of the Nationwide Conference of Chemical Technology and Biotechnology
2018-06-19
Fire Brigade Visit in RADWAG Balances and Scales Headquarters
Fire brigade inspections take place in our new headquarters at Toruńska 5, Radom.
2018-06-14
'Automation of Weighing Processes in Industry' – June 8th, 2018
Guests from various industries had the opportunity to learn about the possibilities offered by the cutting-edge weighing technology implemented on production lines.
2018-06-13
MAS.1 Weighing Module with Readability of d = 0.01 mg
MAS.1 is a brand new design of an electromagnetic mechanism.
2018-06-13
'Automation of Weighing Processes in Laboratory' - RADWAG seminar
The recent seminar organised in RADWAG headquarters gathered over 50 representatives of pharmaceutical companies, laboratories, the Central Office of Measures and other public authorities.
2018-06-12
Graphs in X2 Moisture Analyzers
THBR 2.0 System – Ambient Conditions Monitoring
New Automatic Feeder
PA-04/H automatic vibrating feeder is intended for automatic dispensing of small objects: pills, capsules and small mechanical components.
2018-05-18
Visitors from South Korea in RADWAG Headquarters
Hansung, RADWAG exclusive dealer for Korean market, visited our headquarters in a company of delegation from South Korea.
2018-05-16
RADWAG as an organizer of the international conference - 'Solutions for Pharma'
The representatives of the biggest pharmaceutical companies from Poland and the world (Turkey, Korea, Russia, Colombia and United Arab Emirates) met in our headquarters in Radom.
2018-05-14
IM01.EX Communication Module
With use of IM01.EX communication module it is possible to expand communication interfaces range of the PUE HX5.EX indicator intended for hazardous areas.
2018-05-08
„Shock Detection” - New Function of 4Y and X2 Balances
4Y and X2 series of laboratory balances have been equipped with a new function, 'Shock Detection'.
2018-05-08
Seminar for Pharmacy, Mumbai – 26 April 2018
Nearly 100 representatives of Indian pharmaceutical companies operating globally participated in the seminar.
2018-04-28
Analitika Expo 2018
On 24 – 26 April 2018, THNL (TEHNOLAB BALTIC UAB), the official dealer of RADWAG in Russian Federation, had a pleasure to participate in the 16th edition of Analitika Expo in Moscow.
2018-04-27
CISILE in Beijing
During international CISILE trade fair that took place in Beijing RADWAG and PEKE presented our offer intended for laboratories.
2018-04-25
RADWAG as a Supporter of Education in Radom
Our company is actively engaged in project of the following name: "Students of Technical School of Electronics as Inventors of Electric Car Powered by Solar Energy".
2018-04-24
AVK-1000 Automatic vacuum mass comparator
New vacuum mass comparator enables comparison of up to 6 artefacts with readability of d = 0.1 µg.
2018-04-23
CAFMET 2018 Conference and FORUMESURE Exhibition
It was a great opportunity to exchange information, ideas or experiences and to speak during discussions open to public.
2018-04-23
Korea Lab 2018
On 17 - 20 April 2018, the biggest trade fair for laboratory equipment took place in Seoul.
2018-04-23
Interweighing China 18 – 20 April 2018
Together with PEKE, our dealer, we presented solutions for laboratory and industry.
2018-04-22
AXA11 Automatic pipettes calibration adapter
AXA11 automatic pipettes calibration adapter enables calibration and/or testing of piston pipettes.
2018-04-20
Antistatic ionizer
Antistatic ionizer is a device that removes excess of ions, both positive (cations) and negative (anions), from the sample, weighing device's components and the environment.
2018-04-20
PS 3000 - highly precise measurement of up to 3 kg load
RADWAG has expanded professional and advanced precision balances with two new models: PS 3000.3Y and PS 3000.X2.
2018-04-20
System for Lifting the Platform up
The new system facilitates safe lifting of the platform up while cleaning the scale.
2018-04-20
DJAZAGRO 2018
On 9 - 12 April 2018, the biggest local trade fair for food industry took place in Algeria.
2018-04-19
MESUREXPO 2018
On 9 - 12 April 2018, the second edition of MESUREXPO, a trade show intended for measuring equipment suppliers, was organised in Algeria.
2018-04-19
RADWAG as a „Friend of Wrocław ZOO 2018”
On 12th April 2018, Ist gala, where „Friend of Wrocław ZOO” statuettes were awarded, took place in Wrocław Afrykarium.
2018-04-19
RADWAG at analytica 2018 Trade Fair in Munich
On 10 – 13 April 2018, RADWAG had a pleasure to participate in 26th edition of analytica, an international trade fair for laboratory technology, analysis and biotechnology held in Munich.
2018-04-17
New system allowing lifting the platform up, useful for maintenance purposes
LD4N is intended mainly for food, pharmaceutical and chemical industry.
2018-04-13
RADWAG Mass Comparator in Central Office of Measures in Warsaw
On 27 – 30 March 2018, the first in Poland RADWAG-manufactured AVK-1000 automatic vacuum mass comparator was installed in Central Office of Measures in Warsaw.
2018-04-05
Argentina and Chile – workshops for RADWAG distributors
On 12 – 23 March 2018 RADWAG Balances and Scales organised workshops for local distributors from Argentina and Chile. The workshops took place in Buenos Aires and Santiago de Chile.
2018-04-04
ANUGA FOOD TEC 2018
On 20-23 March, RADWAG Balances and Scales participated in the international Anuga Food Tec trade fair for food industry that took place in Cologne.
2018-04-03
RADWAG Dubai Training Days 2018
On 20-22 March, 2018, training for RADWAG distributors was organised, the event took place in Dubai.
2018-03-29
New Automatic Adapter for Pipettes Calibration
View a movie presenting the operation of new automatic adapter for pipettes calibration.
2018-03-28
CFIA Rennes 2018
Together with ELCOWA, our trading partner, we presented RADWAG-manufactured products for industry solutions.
2018-03-26
Compliance of RADWAG weighing instruments with 21 CFR part 11
RADWAG balances are compliant with regulation 21 CFR Part 11 and with EU GMP Volume 4, Annex 11.
2018-03-23
Business Meeting of RADWAG Sales Representatives
The main goal of the meeting was to present new products and technologies, as well as a plan for 2018.
2018-03-22
RADWAG at EuroLab 2018
On 14 - 16 March 2018 RADWAG Balances and Scales participated 20th, anniversary edition of International Trade Fair of Analytical Measurement and Control Technology - the EuroLab 2018.
2018-03-20
Distributors Meeting in Istanbul, Turkey
On 2 March 2018 in Turkey, the conference of Baykon distributors (RADWAG's representative for the Turkish market) took place.
2018-03-13
RADWAG at Pittcon 2018
On 26th February-1st March 2018 RADWAG Balances and Scales, as the only Polish manufacturer of weighing equipment, participated in the international Pittcon 2018 exhibition in Orlando, Florida.
2018-03-08
The Latest RADWAG Balances and Scales Presentation
The Latest presentation of RADWAG Balances and Scales concerning our company's process approach.
2018-03-08
Antistatic ionizer – balance of positive and negative ions
Antistatic ionizer is used to remove excess of positive and negative ions from the load, balance and the environment.
2018-03-05
Asia Pharma Expo 2018
On 8-11 February 2018, in Dhaka, the capital of Bangladesh, the 10th Asia Pharma Expo trade fair for South Asian pharmaceutical industry took place.
2018-02-21
Canteen Space for Employees
A canteen for employees is now opened in the new headquarters.
2018-02-20
Audit Trail - New Function of HY10 and PUE 7.1 Indicators
Audit Trail is a new function of HY10 and PUE 7.1 indicators. Due to this function, weighing instruments operated via HY10 and PUE 7.1 indicators are compliant with CFR 21 Part 11.
2018-02-14
Measurement of Weights Magnetization
RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and magnetization of weights.
2018-02-12
New headquarters of Radwag Balances and Scales
We are happy to announce that RADWAG Balances and Scales has moved its operation to the new headquarters at Toruńska 5, Radom.
2018-02-02
Unsophisticated assembly and disassembly of the weighing chamber.
Microbalances of MYA 4Y and MYA 4Y.P series, and UYA 4Y ultra-microbalances, have been equipped with an advanced weighing chamber that can be completely disassembled.
2018-01-17
Verification of PM 10 Precision Balances
The PM series precision balances of 10 kg capacity have been verified for conformity with law regulations enforced by EU directives.
2018-01-02
New Year’s Wishes and Greetings from RADWAG
We want to wish everyone all the best for the coming 2018.
2017-12-27
Statue APMF 2017
Radwag would like to thank the host of Asia-Pacific Symposium on Measurement of Mass, Force and Torque (APMF 2017) in Krabi.
2017-12-04
APMF 2017
From 19th -22nd November Asian – Pacific Symposium on Measurement of Mass, Force and Torque (APMF 2017) took place in Krabi, Thailand.
2017-11-30
R Panel
R Panel allows to operate electromagnetic weighing modules of MAS R and MPS R series via computer operation panel.
2017-11-20
PUE HX5.EX indicator
RADWAG expands its product range with a new device, HX5.EX indicator intended to be operated in hazardous areas. It has been designed in accordance with ATEX 2014/34/UE directive.
2017-11-02
PUE HX5.EX indicator
RADWAG expands its product range with a new device, HX5.EX indicator intended to be operated in hazardous areas.
2017-11-02
SÜFFA 2017
On 21-23 October, SÜFFA trade fair took place in Stuttgart, Germany.
2017-10-30
New automatic pipettes
The new series of automatic pipettes offers exceptional precision, accuracy and results repeatability plus maximum comfort of operation.
2017-10-13
Seminar in Alexandria
On 20th September in Alexandria, Egypt, El Safwa company - RADWAG’s authorised distributor, organised a seminar for its customers.
2017-10-13
RDBbackup - New Component of E2R System
We would like to present RDBbackup - the latest component of E2R System.
2017-10-11
Maghreb Pharma 2017
On 3-5 October 2017, MAGHREB PHARMA Expo took place in Algiers (Algeria).
2017-10-10
C32 Industrial Scales
C32 industrial scales series is an advanced but at the same time an easy-to-use weighing instrument that can be operated in various industry areas.
2017-10-06
C32 Industrial Scales
C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operated in various industry areas.
2017-10-05
XA 4Y.M and XA 4Y.M.A Microbalances
New and fast parameters customization.
2017-09-29
CIM 2017
On 19-21 September, 18th International Metrology Congress took place in Paris.
2017-09-28
A new video presenting features of ultra-microbalances and microbalances of 4Y series
Watch a new video about 4Y series ultra-microbalances and microbalances
2017-09-19
Pacific Symposium on Measurements of Mass
From 19th – 23rd November 2017 Asian – Pacific Sumposium on Measurements of Mass, Force and Torque will be held in Krabi, Thailand.
2017-09-15
New automatic pipettes
The new series of Radwag automatic pipettes guarantees exceptional precision, accuracy and results repeatability. It also offers maximum comfort of operation.
2017-09-13
Training for pharmacy companies
On 23 - 25 August Radwag had a pleasure to host Taqaddom Scales Co. Ltd., a partner from Palestine.
2017-09-01
AFRIMET meeting and 70th anniversary of establishment of National Metrology Institute of South Africa
On 2 - 4 August, 2017, in Pretoria, the 70th anniversary of establishment of National Metrology Institute of South Africa (NMISA) was celebrated.
2017-08-24
LAB AFRICA 2017
LAB AFRICA, the greatest exhibition for laboratory branch, took place in Johannesburg on 15 - 17 August.
2017-08-23
Multilingual Labels
A new feature of the Label Editor R02 and HY10, WLY and WPY weighing instruments is the function of printing out multilingual labels.
2017-08-08
EXPO PACK 2017
On 13-15 June 2017, third edition of the EXPO PACK exhibition took place in Guadalajara (Mexico).
2017-08-02
Seminar in Quito
On 12-15 June, RADWAG participated in a seminar organized by local distributors in Ecuador's capital - Quito.
2017-07-28
Seminar in Bogota
On 5-8 June, a seminar organized by local distributor took place in Columbia's capital - Bogota.
2017-07-27
Label Editor
In response to our customers expectations, we would like to present short videos providing the users with guidelines on how to operate the Label Editor R02.
2017-07-21
UYA 6.4Y Ultra-Microbalance
Innovative tools and measurement methods have contributed to the new design of UYA 6.4Y Ultra-Microbalance.
2017-07-10
New publication concerning mass comparators
Read the new Radwag publication providing detailed information about automatic comparison of weights and mass standards.
2017-07-04
High capacity PM precision balances
We would like to present new series of balances.
2017-06-07
New possibilities of 4Y, HY10 and TMX weighing instruments
4Y, HY10 and TMX weighing instruments were equipped with new functionalities. The list of the most interesting functions is presented below.
2017-06-01
Riyadh Saudi Arabia 2017
On 21st and 22nd May in Riyadh, Saudi Arabia, KIAK company - RADWAG local distributor organised a seminar for their distributors and end users.
2017-06-01
R-Lab
In response to our customers expectations, we would like to present short videos to help you start cooperation with the R-Lab.
2017-05-19
MESUREXPO 2017
On 11-13 April, 2017, RADWAG participated in the first edition of MESUREXPO - metrological exhibition held in Algeria, which exhibition took place at the same time as the DJAZAGRO trade fair.
2017-04-25
DJAZAGRO 2017
On 10-13 April, 2017, RADWAG participated in 15th edition of DJAZAGRO, an international agro-food sector fair organized in Algeria.
2017-04-18
Metrological Conferences in Nantes
Metrological conferences - les Rencontres Francophones sur la Qualité et la Mesure (RFQM) took place in Nantes on 27-29 March.
2017-04-04
RADWAG Presentation on FORUMESURE
Conferences concerning metrology took place in Nantes on 27-29 March, they were held as part of the FORUMESURE organized by CAFMET.
2017-04-04
Forum Labo
Forum Labo - the greatest trade fair for laboratory equipment took place in Paris, France, on 28-30 March.
2017-04-03
Arab Lab 2017
Every year in March Radwag participates in Arab Lab exhibition in Dubai. The fair is one of the biggest events of such type in the Middle East which gathers exhibitors from all over the world.
2017-03-27
CFIA 2017
CFIA 2017 - the greatest French trade fair for food industry, the event took place in Rennes on 7 - 10 March.
2017-03-17
PUE C32
Our offer of advanced industrial solutions has been enriched with a brand new terminal, PUE C32, designed to compose load cell scales.
2017-03-17
PUE C32 - modern weighing terminal
Our offer of advanced industrial solutions has been enriched with a brand new terminal, PUE C32, designed to compose load cell scales.
2017-03-17
Meeting of distributor's dealers in Mumbai
On 4 March in Mumbai, a meeting of our distributor's dealers - LCGC RADWAG WEIGHING SOLUTIONS - took place.
2017-03-16
Seminar in Bangalore
RADWAG together with our distributor on the Indian market organized a seminar for pharmaceutical companies, which took place on 3 March in Bangalore.
2017-03-15
New video presenting automatic scale
We would like to present DWT/RC series checkweigher offering an innovative system of transport direction change.
2017-03-09
Asia Pharma Expo 2017
Our distributor providing products for Bangladesh, Paradise Scientific company, once again took part in Asia Pharma Expo exhibition. The event was organised in Bangladesh – Dhaka on 23-25 February, 2017.
2017-03-08
New software for programmers: RADWAG Development Studio
Explore the possibilities and convenience of RADWAG development environment.
2017-02-23
High Capacity PM Precision Balances
We would like to present PM precision balances equipped with an innovative measuring system based on MONO
BLOCK technology. 2017-02-14
Innovations in RADWAG Software
We would like you to get familiar with the summary of the most interesting projects carried out by RADWAG programmers.
2017-02-06
Automatic scales in production processes
Watch a video presenting functions and usage of automatic scales in food industry plants.
2017-01-26
New scales offering you higher readability
In 2017 RADWAG offers its customers two new series of industrial one load cell platform scales: WPT/C/NV and WPY/NV.
2017-01-02
New Year’s Wishes and Greetings from RADWAG
Putting a great deal of effort in so far undertaken activities guarantying development of our company we want to wish everyone all the best for the coming 2017.
2016-12-30
New high capacity precision balances
Watch our new movie presenting the new high capacity precision balances which are characteristic for improoved accuracy, better eccentricity and results repeatability.
2016-12-27
MA X2.A Moisture analyzer
Moisture analyzers of MA X2.A series is a modern device intended for performance of quick analysis of humidity, dry mass content and many other product parameters.
2016-12-05
RADWAG and the University of Warsaw
On November 29, 2016 in University of Warsaw Biological and Chemical Research Centre the following seminar took place: 'Mass Measurement in a Chemical Laboratory'.
2016-12-05
RADWAG Metrology Centre: Seminar and New Laboratory
On November 8, 2016 in RADWAG Metrology Centre, a Seminar for mass comparators users was organised.
2016-12-02
Maghreb Pharma Expo 2016
On 8-10 November, 5th MAGHREB PHARMA EXPO took place in Algiers (Algeria).
2016-11-24
MA X2.A
The MA.X2.A series features an innovative system of drying chamber opening and closing.
2016-11-10
High capacity precision balances
A unique design solution is now available for new high capacity PS balances (models: 6100, 8100, 10100).
2016-11-08
European Trade Fair for Packaging FACHPACK 2016
FachPack 2016 is an international trade fair for packaging, technology, processing and logistics. It was organized on 27-29 September in the Exhibition Centre Nuremberg.
2016-10-12
CFIA Morocco 2016
On 27-29 September, CFIA - Morocco Fair took place in Morocco, Casablanca.
2016-10-11
Thailand Lab
From 21.09 – 23.09 in Bangkok one of our distributors – RADWAG THAILAND – participated in THAILAND LAB exhibition.
2016-10-06
Publications Section
A new functionality is now available on our website: a summary of all folders, brochures and leaflets presenting our products.
2016-10-05
NEW AK-4/1001 AUTOMATIC MASS COMPARATOR
RADWAG expands its AK-4 mass comparators range, a new model, AK-4/1001 with readability of 1 µg, available now.
2016-09-13
Trade Fair for Packaging Solutions, FachPack 2016
You are most welcome to visit our stand on FachPack 2016 in Nuremberg where we will present our latest weighing solutions for industry.
2016-08-30
MUYA.4Y - new high accuracy modules
Our product range is now extended with high accuracy modules with capacity up to 5g and readability ranging from 0.1 µg to 1 µg.
2016-08-16
MA X2 Moisture analyzer
Our X2 series, known and appreciated by customers, has been extended with a new product – MA X2 representing advanced level for moisture analyzers.
2016-08-04
WLC.X2 – hi-tech precision balances
Our product line is now extended with WLC 02.X2 balance
2016-08-03
Working modes of X2 series balances - Part 3
X2 Synergy balances as advanced weighing solutions redefine laboratory weighing standard.
2016-07-14
Power in Precision
Interview with Dr. Witold Lewandowski, RADWAG's Managing Director.
2016-07-12
4Y Balances: Video-Guidance and an on-screen manuals
4Y balances feature "Media" module providing you with complex guidance.
2016-06-30
WLC.X2 – hi-tech precision balances
The new WLC.X2 precision balances with 5” touchscreen provide high quality measurements and the maximum comfort of operation when carrying out advanced weighing processes.
2016-05-31
Analytica 2016
From 10th to 13th May 2016 RADWAG, once again, participated in the International Trade Fair in Munich (Messe Muenchen International – MMI).
2016-05-19
InterWeighing 2016
RADWAG participated in InterWeighing 2016, an expo dedicated for manufacturers of weighing equipment. Inter Weighing known as the largest trade show is organized once a year.
2016-04-29
DJAZAGRO 2016
From 18th to 21st April 2016 RADWAG participated in DJAZAGRO 2016, an international agro-food sector fair organized in Algeria.
2016-04-26
500 000 balance manufactured by RADWAG
RADWAG manufactures 500 000 electronic balance!
2016-04-19
RADWAG on 18th Eurolab Trade Fair
From 12th to 14th April 2016 RADWAG participated in the EUROLAB XVIII International Trade Fair of Analytical, Measurement and Control Technology in Warsaw.
2016-04-14
New non-automatic scales’ marking
On 20th April 2016 Directive 2009/23/EC regulating non-automatic weighing instrument issues shall be replaced by Directive 2014/31/EU.
2016-04-11
Arab Lab 2016
From 20th – 23rd March 2016 RADWAG participated in the laboratory equipment exhibition Arab Lab in Dubai.
2016-04-04
CAFMET 2016
From 21st to 24th March 2016 Radwag participated in the 6th International Metrology Conference in Dakar, Senegal. The conference was combined with FORUMESURE.
2016-04-01
RADWAG – Power in Precision
It is our great pleasure to present an album published on the occasion of 30 years of RADWAG. The album tells RADWAG’s history starting from its early development stage till the present day.
2016-03-23
CFIA 2016
From 8 to 19 of March took place the very important event in France CFIA 2016.
2016-03-18
AUTOMATICON 2016
On 1st - 4th March 2016 another edition of AUTOMATICON International Trade Fair took place in Warsaw, Poland.
2016-03-11
Working modes of X2 series balances - Part 2
X2 Synergy balances as advanced weighing solutions redefine laboratory weighing standard.
2016-03-09
Special offer on X2 series
The X2 series - a real bargain just now!
2016-01-28
NEW RADWAG HEAD OFFICE BUILDING – PHOTO GALLERY
Introducing the next stage of constructing the new headquarters of RADWAG.
2016-01-27
Weighing animals in the ZOO in Wrocław, Poland
RADWAG has once again sponsored scales for the Wroclaw ZOO.
2016-01-26
Working modes of the X2 Synergy series
Watch the following videos to get familiarized with working modes of the X2 series balances.
2016-01-18
iENA 2015
Radwag participated in "iENA inventors" exhibition which took place in Norymberg from 29th October to 1st November 2015.
2015-12-30
Europack Euromanut CFIA 2015
From 17 to 19 of November RADWAG company participated in the exhibition Europack Euromanut CFIA 2015 which takes place every 2 years in France –Lyon.
2015-11-26
Gulfood Manufacturing 2015
Photo gallery documenting Gulfood Manufacturing Exhibition 2015.
2015-11-24
New RADWAG head office building – photo gallery
Watch photo gallery documenting the next stage of construction works.
2015-09-24
IMEKO 2015
21st edition of International Measurement Confederation took place this year. It was held in Prague, the capital city of Czech Republic, form 31st August to 4th September.
2015-09-09
LAB AFRICA 2015
From 4 to 6 of August 2015 in Johannesburg (RSA) it took place the biggest faire of laboratory equipment in Republic of South Africa, which is held every 2 years.
2015-08-14
New folder presenting comparators
Learn up-to-date offer on RADWAG manufactured mass comparators. New informative folder available now.
2015-08-11
The new Head Office under construction
Works at RADWAG building site are in steady progress. On 3rd August 2015 the last roof structure component was installed.
2015-08-11
Balances 4Y series presented in the new movie
See the new features of 4Y series balances in our latest movie.
2015-07-29
RADWAG building site - the new photo gallery
Watch a new photo report on progress made at the building site of the new RADAWAG head office.
2015-06-30
X2 Synergy: 3D Presentation
In order to learn about X2 series functionality and performance see a movie clip with its presentation.
2015-06-19
4Y - a brand new series of laboratory balances
Discover 4Y series balances: professional standard for weighing and the highest measurement accuracy!
2015-06-10
4Y Series Balances
4Y balances - novelty of 2015: professional standard for weighing, the highest measurement accuracy.
2015-06-03
Conference in Hanoi
On 21st and 22nd May 2015 RADWAG participated in the conference on measurements in Hanoi, Vietnam, organized by the Ministry of Science and Technology in Vietnam.
2015-06-01
Laboratory balances – the X2 Synergy series
Watch a video clip presenting functionality and possibilities of the new series of laboratory balances - X2 Synergy.
2015-06-01
FORUMESURE 2015
From 19 to 21 of May in Alger (Algeria) at ENSA (National School of Agronomy), it took place the 5th edition of FORUMESURE organized by CAFMET.
2015-05-29
RADWAG building site - the new photo gallery
Watch a new photo report on progress made at the building site of the new RADAWAG head office.
2015-05-12
Reportage on CISILE 2015 Fair
On 23-25 April, RADWAG and PEKE company, our Chinese distributor, participated CISILE 2015.
2015-05-08
Reportage on InterWEIGHING 2015 Fair
On 20-22 April 2015, RADWAG took part in InterWEIGHING 2015 Fair Trade. We accompanied PEKE company, our Chinese distributor.
2015-05-07
Reportage on CSIE 2015 Fair
On 16-18 April 2015, RADWAG company had a pleasure to demonstrate its products in Chengdu, China, at CSIE 2015 Trade Fair.
2015-05-06
4Y Microbalances
Watch a movie on the new 4Y series and learn about the microbalance functionality and possibilities.
2015-04-30
Determination of solids and liquids density
Watch procedure for determination of solids and liquids density performed by means of RADWAG laboratory balances and by means of functional density determination kit.
2015-04-30
Reportage on DJAZAGRO Fair
The international trade fair DJAZAGRO of Food Industry took place on 20-23 of April in Alger (Algeria).
2015-04-30
RADWAG building site - the latest photo gallery
Watch the latest photo report documenting progress made at the building site of the new RADWAG head office.
2015-04-09
X2 – The brand new series
Discover X2 series balances with 5’’ colour touchscreen redefining advanced standards for laboratory weighing.
2015-04-02
Movable Weighing Range
Discover „Movable Weighing Range” function and see that it is possible to sample small portions with the highest accuracy even when using heavy tare containers.
2015-04-01
R series balances
Quality and precision, functionality and ergonomics, accuracy in all conditions are just a few features of R series balances. See a new folder presenting R series balances.
2015-03-30
SUBSCRIBE TO RADWAG NEWS
Don’t let any information omit you. Now you can subscribe to Radwag news. Just provide us with your e-mail address in order to receive notification messages supplying you with the latest information.
2015-03-24
Reportage on EuroLab Fair
17th edition of International Trade Fair of Analytical Measurement and Control Technology took place this year. The Fair was held on 18 - 20 March 2015.
2015-03-23
RADWAG seminar to be held during EUROLAB 2015
RADWAG seminar is one of the points of agenda drew up for the first day of EUROLAB 2015 Fair. The seminar takes place on 18th March 2015 at 10:30, room B.
2015-03-11
MA.3Y Moisture Analyzers: quick start-up!
Video presentation on unpacking MA.3Y Moisture Analyzer, preparing it for operation and connecting to the mains.
2015-02-19
Seminar in Suzhou 2015
RADWAG company participated in a business seminar on 26-27 January 2015. The seminar took place in Suzhou.
2015-02-11
The new RADWAG Head Office under construction
Photoreport on progress made at the building site of the new RADWAG head office.
2015-02-04
R SERIES – the highlights of features
Watch a movie presenting functionality of R series balances.
2015-01-29
Ultra-microbalances and microbalances
The new folder presenting outstanding features of ultra-microbalances and microbalances.
2015-01-29
RADWAG 2015 presentation
Watch the latest presentation of RADWAG company.
2015-01-28
MA.R Moisture Analyzers: quick start-up!
Video presentation on unpacking MA.R Moisture Analyzer, preparing it for operation and connecting to the mains.
2015-01-15
New Year’s greetings 2015
Summary of RADWAG achievements of 2014 and greetings for the New Year 2015.
2014-12-30
Micro Scale Measurement
Guidelines on optimization of measurement process wherein light weights are measured with the highest resolution - new RADWAG publication
2014-12-11
DWM Checkweighers
Movie about dynamic scales equipped with an electromagnetic weighing module - with a voice-over translation now! Feel invited to watch the movie and to learn about DWM scales functionality.
2014-11-21
Gulfood Manufacturing 2014
RADWAG Balances and Scales attended Gulfood Manufacturing industrial conference which took place on 9-11 November 2014 in United Arab Emirates.
2014-11-18
X2 Series Balances
Discover X2 series balances with 5’’ colour touchscreen redefining advanced standards for laboratory weighing.
2014-11-18
RADWAG Dubai Training Days 2014
RADWAG Balances and Scales had a great pleasure to arrange annual training for distributors RADWAG Dubai Training Days 2014.
2014-11-17
NEW SERIES OF RADWAG MOISTURE ANALYZERS
New MA.R series - advanced technology for drying process and moisture content analysis!
2014-11-14
NEW WEIGHING MODULES AND PLATFORMS
Radwag is pleased to inform that new series of high resolution weighing modules has been introduced into the offer.
2014-11-13
Dealers meeting in Seoul 2014
Last weekend our Korean dealer Hansung Instrument organized dealers meeting in Seoul.
2014-10-28
Communication by Wireless for 3Y balances
Technologically advanced balances of 3Y series have been enriched with wireless interface allowing wireless connection.
2014-10-07
KLASTER
In June 2014 RADWAG company signed a partnership agreement with KLASTER - Knowledge and Innovation Community for Information and Communication Technologies.
2014-09-15
Q.C. TEST REPORT–NEW DESIGN
A brand new form of Q.C. TEST REPORT shall be introduced in October 2014 by RADWAG. The new document is designed to be user-friendly and more readable.
2014-09-11
THE NEW HEAD OFFICE
In September 2014, RADWAG company commenced the construction of its new head office. Total floor area of the new building is planned to cover 8 500 m2.
2014-09-09
Seminar in Taipei 2014
RADWAG, together with Warsaw Trade Office located in Taipei and in cooperation with Proyes Testing Equipment company, organized a seminar and presentation of its products.
2014-07-11
SQC in laboratory
The latest release on statistics module functionality and automation of measurement analysis process, both used in balances and scales manufactured by Radwag.
2014-07-07
R Series Balances
The R series represents a new standard level for analytical balances. It features a new, legible LCD display which allows a clearer presentation of the weighing result.
2014-06-11
New Generation 3Y Series Ultra- and Microbalances
Brand new 3Y series of Radwag ultra-microbalances and microbalances redefines well known and valued by the users all around the world.
2014-06-09
ARABLAB The Expo 2014
On 17-20 of March 2014, in Dubai, UAE, our company Radwag Balances and Scales participated in a laboratory fair ARABLAB The Expo 2014.
2014-04-25
Conference CAFMET 2014
From 31 of March to 3 of April in Pretoria (RSA), it took place the 5th international conference of CAFMET 2014 (African Committee of Metrology) as well as the second edition of FORUMESURE.
2014-04-25
IMEKO 2014
From 3 to 5 of February in Cape Town - RSA, it took place the international conference IMEKO 2014 concerning the following matters: Mass, Force, Torque, Hardness and Vibration....
2014-03-18
Alibi Reader
It is possible to download Alibi Reader application, which serves for export and reading data saved to scales Alibi memory.
2014-01-24
Radwag Chinese Training Days
Between 26th and 28th November 2013 in Shenzhen, South-East China, we ran RADWAG CHINESE TRAINING DAYS 2013 training session.
2014-01-05
Albanian
Danish
Nederlandse
Estonian
Finnish
Hungarian
Icelandic
Kazakh
Latvian
Lithuanian
Macedonian
Norwegian
Portuguese
Romanian
Russian
Slovak
Slovenian
Swedish
Ukrainian
Serbian
Montenegrin
Deutsch
Español
Français
Italiano
Polski
Türkiye
Česky
USA
中文
