PS 210.R2 Precision Balance in Laboratory Balances - Radwag Balances And Scales

PS 210.R2 Precision Balance

Radwag Balances and Scales - Advanced Weighing Technologies
Selected language English
PS 210.R2 Precision Balance in Laboratory Balances
This image is for reference only.
PS 210.R2 Precision Balance
Product code: WL-212-0018
Select model (13)
Max: 210gd: 0,001g

Max: 200 / 2000gd: 0,001 / 0,01g

Max: 360gd: 0,001g

Max: 600gd: 0,001g

Max: 600gd: 0,01g

Max: 750gd: 0,001g

Max: 1000gd: 0,001g

Max: 2100gd: 0,01g

Max: 3500gd: 0,01g

Max: 4500gd: 0,01g

Max: 6100gd: 0,01g

Max: 8100gd: 0,01g

Max: 10100gd: 0,01g

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable LCD display which allows a clearer presentation of the weighing result. Besides, the display has a... More ››
Maximum capacity [Max]: 210g
Readability [d]: 0.001g

Select model:
PS 200/2000.R2 Precision Balance
PS 210.R2 Precision Balance
PS 360.R2 Precision Balance
PS 600.R2 Precision Balance
PS 0.6.R2 Precision Balance
PS 750.R2 Precision Balance
PS 1000.R2 Precision Balance
PS 2100.R2.M Precision Balance
PS 3500.R2.M Precision Balance
PS 4500.R2.M Precision Balance
PS 6100.R2.M Precision Balance
PS 8100.R2.M Precision Balance
PS 10100.R2.M Precision Balance
Select all
Show me
Send me a quote
PS.R2 series balances represent a new standard of precision balances. They feature a new, readable LCD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. 
New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm. balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow.
PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection.

The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section.

The housing is made of plastic, and the pan is made of stainless steel.
The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. 
The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis.

The data is registered in 5 databases:
  • users (up to 10 users),
  • products (up to 1000 products),
  • weighments (up to 5000 weighments),
  • tares (up to 100 tares),
  • ALIBI memory (up to 100 000 weighments).
There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives.

Quick access to information
Direct access to functions and databases is possible from the level of keyboard. 
Database – a direct access to databasis
Function - a direct access to the basic functions
F1 to F4 – programmable function and navigation keys on the menu

ALIBI memory
The used ALIBI memory is a data secure area  and allows to record up to 100 000 weighment records.  It ensures security of constant data register in the long time period.
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications
Maximum capacity [Max]



Minimum load



Readability [d]



Tare range



Verification scale interval [e]



Repeatability (Max)



Repeatability (5% Max)






Stabilization time




internal (automatic)


OIML Class



Levelling system




LCD (backlit)


Weighing pan dimensions



Packaging dimensions



Net weight



Gross weight



Protection class

IP 43


Communication interface

2×RS232¹, USB-A, USB-B, Wi-Fi® (option)


Power supply

100 — 240 V AC 50/60 Hz


Operating temperature

+10 — +40


Repeatability is expressed as a standard deviation from 10 cycles of mass standard weighing.
Stabilization time depends on the ambient conditions and the dynamics of weighing pan loading; specified for FAST profile.

1 Barcode scanners, available as weighing instrument accessory, communicate with the instrument via RS232 interface exclusively.



- 2×RS 232
- Wi-Fi®® (option)
Extra function keys

Extra function keys

The balance comprises 2 buttons enabling easy access to DataBase and Functions. Additionally it is equipped with 4 programmable function keys F1-F4. The function keys can perform different operations for each mode:
- header printout,
- tare editing,
- footer printout,
- product selection.
Additional information line

Additional information line

Display has a new text information line allowing to show additional messages and data, e.g. product name, operator name  or tare value, etc. A real novelty are pictograms signalling current operating mode, connection with a computer, the battery charge, service or balance functions.
R Series Laboratory Balances



Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.


Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.


Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.


Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.


Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Data Sheet

Show me


Choose more product:
Show me Download
User Manuals
User Manual - R Series balances

Show me

(6.56 MB)
Start up Guide

Show me

(9.48 MB)
Conformity Declarations
Conformity Declaration

Show me

(0.04 MB)
Publications and Brochures
R - Laboratory balances

Show me

(1.26 MB)
USB Free Link - Direct Balance-PC Communication

Show me

(2.07 MB)
Alibi Reader - tutorial

Show me

(1.47 MB)
Stainless Steel in RADWAG products. Standard and special applications

Show me

(2.44 MB)
Defined Weighing Profiles

Show me

(1.36 MB)
R Series balances

Show me

(3.67 MB)


Alibi Reader


E2R System
R Panel








RADWAG Connect


RADWAG Development Studio
LabVIEW Driver
Under-Pan Weighing Rack
Density determination KIT
Receipt Printer
Protective cover for balances
AP2-1 Current Loop Unit
Cigarette lighter receptacle power supply cables


RS 232 cables (scale - EPSON printer)


RS 232, RS 485 cables


USB cable (scale - printer)
Barcode scanners
Anti-Draft Chamber for Balances with a 128×128 mm Weighing Pan
Draft Shield
Balance Storage Case
Power Adapters


Radwag Balances and Scales
Torunska 5
26-600 Radom
tel.: +48 48 386 60 00
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2022 RADWAG Balances and Scales. All rights reserved.

Select language

Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Change website to USA USA
Change language page on 中文 中文
Want to ask us something?
Call us: +48 48 386 60 00
We will answer all your questions.