PUE HY10 Weighing Terminal

PUE HY10 Weighing Terminal view:1

Product code: WX-008-0027
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market.  The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
Verification
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market. The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
Verification
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market. The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
2 years warranty
Request for quotation

Overview

HY10 terminal has been designed to enable designing multifunctional load cell scales operating in industry, and to cooperate with RADAWAG high resolution platforms and weighing modules.

HOUSING

High IP rating and stainless steel allow operation in challenging working conditions (high humidity, dustiness). These two characteristics make terminal meet high hygiene standards for food and pharmaceutical industries.
  • The terminal’s housing and base are both made of stainless steel. All the HY10 connectors are fed through glands which along with water and dust proof housing guarantee high IP rating, i.e. IP68/69.
  • 2-point terminal-base fixing system allows you to freely tilt your LCD. Option of tilt angle adjustment improves ergonomics of use and optimises indication visibility.
 
DISPLAY
10.1” colour display of 1024x600 pixel resolution with a capacitive touchscreen
  • Large, 10.1” backlit colour display guarantees easy-to-read information even in low light conditions. The indication can be read from a considerable distance, which increases your mobility.
  • High resolution (1024x600) means high display readability providing crisper digits, symbols etc. Now you will not suffer from eye strain. The higher the resolution the less affected your eyesight is, not to mention greater comfort.
  • The touchscreen stands for ease of operation, simply trust your intuition and start to operate the device.  Now accessories such as mouse or keyboard are needless. Additional numeric keys and soft buttons provide maximum functionality.
 
REMOTE CONFIGURATION
You can set the HY10 parameters remotely using Parameters Editor software.
The parameters of PUE HY10 can be set either remotely or by means of the terminal. Use of ‘Parameters Editor’ software allows repeatable parameters setup.
Once you set all the parameters for a particular terminal, save them to a file in order to be able to copy them to terminals operating at twinlike workstations.
The terminal setup can be carried out either using USB flash drive or network. ‘Parameters Editor’ offers remote desktop option. With this solution we can carry out your terminal’s setup even if your company is located miles away from the service.
 
SCREEN EDITOR
Customized screen layout, extensive functionality
PUE HY10 terminal offers screen layout customization. You can display only those components that you find indispensable for your work.
You can make decision not only on what to add to your screen but also on the size of particular component. Self-designed screen layout makes your work easier and now the weighing operation is no longer a time-consuming process.
 
LABELLING
 
Ability to design labels for each terminal-performed process.
Labelling function, implemented into firmware, enables marking products with weight labels. This makes product identification fast and easy.
Using ‘Label Editor’, a dedicated software, you can design label which upon being sent to the scale is available for the operator in labels database. The label can provide data such as date, batch number, mass, pictogram, Ean-13 code with weight value and product code. 
Labelling enables:
  • making Label Database in a terminal;
  • assigning either a customized label to a particular product or a common label to a group of products;
  • printing C labels (pallet) and CC labels (containers) providing total weight and quantity;
  • automatically triggered printout of c labels.
MULTI-PLATFORM OPERATION

Standard design: support of one load-cell platform
Optional design: support of 5 extra platforms maximum (1 internal module plus 4 external modules)

 
 
 

Media

PUE HY10 Weighing Indicator

Functions

Dosing

Dosing

Radwag Dosing
Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Radwag Labelling
Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Radwag Plus/Minus Control
Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Radwag Percent Weighing
Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Radwag Totalizing
Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Radwag Parts counting
Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Radwag Peak hold
Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Radwag Formulation
Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Newton unit measurement

Newton unit measurement

Radwag Newton unit measurement
Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.
Statistics

Statistics

Radwag Statistics
Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Radwag Checkweighing
Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
GLP Procedures

GLP Procedures

Radwag GLP Procedures
Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Radwag Animal weighing
Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Radwag Differential weighing
Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Radwag Replaceable unit
Replaceable units.
Statistical Quality Control

Statistical Quality Control

Radwag Statistical Quality Control
Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

Radwag ALIBI Memory
"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Transactions

Transactions

Radwag Transactions
Complex weighing mode for registration of weighings that are part of transactions such as sale, purchase and warehouse transfer. You can create a new transaction using the scale. It is possible to pause the transaction or abort it.  The function supports warehouse management in an enterprise.

Datasheet

Operating temperature -10 ÷ +40 °C
Power supply 100 ÷ 240 V AC 50 ÷ 60 Hz 
Display 10,1" widescreen colour dispaly 1024x600 
Protection class IP 68 (1h max)/69 
Atmospheric humidity 10÷85% RH no condensation 
OIML Class II or III 
Keypad panel touchscreen 
Maximum quantity of verification units 6000 
Maximum increase of signal 19,5 mV 
Maximum voltage per verification unit 3,25 µV 
Minimum volatge per verification unit 0,4 µV 
Minimum load cell impedance 50 Ω 
Maximum load cell impedance 1200 Ω 
Connection of load cells 4 or 6 wires + shield 
Load cell excitation voltage 5V DC 
Housing stainless steel 
Analog output module (option) operation modes - 4-20mA, 0-20mA, 0-10V 
Processor NVIDIA Cortex A9 Dual Core 1 GHz 
Memory RAM 256MB DDR2, 8GB - karta micro SD 
Operating system Microsoft Windows Embedded Compact 7 
Max number of platforms 6 (2 x internal weighing module + 4 x external weighing modules) 
Ethernet 10/100 Mb, RJ45 
USB 2 ports 
RS 232 ×2 
Touch panel capacitive 

Documentation

Technical Documentation

User Manual Terminal HY10
3.63 MB EN

see the publication

E2R AUDIT TRAIL CFR21 p.11
0.18 MB EN

see the publication

Data Sheet
1.41 MB EN

see the publication

Conformity Declaration
0.04 MB EN

see the publication
Publications and teaching materials

Download

Drivers

GSD Profibus (1.321 KB)

GSD Profinet (4.324 KB)

Accessories

HRP Platforms High Capacity
Stainless steel HRP.H platforms
Waterproof stainless steel platforms
Mild steel powder coated weighing platforms
Platforms in plastic casing

Compatible with

Weighing pan dimensions
Readability [d]
Maximum capacity [Max]
Verification
Product name
PL3/6/D2

PL3/6/D2

3/6 kg

-

195×195 mm

PL1,5/3/D2

PL1,5/3/D2

1,5/3 kg

-

195×195 mm

PL0,6/1,5/D2

PL0,6/1,5/D2

0,6/1,5 kg

-

195×195 mm

Stainless steel ramp platforms with LD lifting system
Ramp stainless steel platforms
Stainless steel platforms, pit version
Audit Trail Reader
E2R System
Label Editor R02
Parameter Editor
R.Barcode
R-LAB
RAD-KEY
RADWAG Connect
RADWAG Development Studio
RADWAG Remote Desktop
LabVIEW Driver
RS 232 cables (scale - Ethernet)
RS 232, RS 485 cables

Additional modules

RDA (RADWAG Data Access)3
Radwag Balances and Scales
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag Google Plus Radwag
© 2018 RADWAG Balances and Scales. All rights reserved.

See our movies
RADWAG