aggiungere a confrontare : PUE HY10 Weighing Terminal

Selected language Italiano Italiano
Change language
Change language page on Deutsch DeutschChange language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Polski PolskiChange language page on Türkiye Türkiye ČeskyChange website to USA USAChange language page on 中文 中文

PUE HY10 Weighing Terminal

PUE HY10 Weighing Terminal - PUE HY10 terminal is a constructional component of load cell scales, dosing devices, formula-making scales and sets designed to perform operations such as labelling and counting. Construction
PUE HY10 terminal is housed in a stainless steel casing with IP68/69
This image is for reference only.

Codice prodotto: WX-008-0027
Richiesta di offerta

caratteristiche generali

PUE HY10 terminal is a constructional component of load cell

scales,

dosing devices, formula-making

scales

and sets designed to perform operations such as labelling and counting.

Construction
PUE HY10 terminal is housed in a stainless steel casing with IP68/69. The terminal features 10,1” touchscreen display and numerous ports allowing connection of various devices: 2

weighing

platforms, barcode scanner, printer, labeller, transponder card reader and PC equipment (mouse, computer, keyboard, USB flash drive).

Area of use:
  • Industrial

    weighing

    systems, favouring PUE HY10 application owing to its solid, durable construction and ease of operation.
  • Industrial systems intended for the following operations performance:
               - counting,
               - labelling,
               - dosing,
               - making formulas.
  • Industrial weighing systems operating in cooperation with systems designed for automatic control – cooperation possible due to numerous INs and OUTs.

Video

PUE HY10 Weighing Indicator

funzioni

Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Transactions

Transactions

Complex weighing mode for registration of weighings that are part of transactions such as sale, purchase and warehouse transfer. You can create a new transaction using the scale. It is possible to pause the transaction or abort it.  The function supports warehouse management in an enterprise.

foglio di calcolo

Quantita massima di unita verificate

6000 e

 

Classe OIML

II or III

 

display

10,1” graphic colour touchscreen

 

punteggio IP

IP 68 (1h max)/69

 

interfaccia

2×RS232, 2×USB, Ethernet, 4 IN / 4 OUT (digital)

 

Modulo Wi-Fi® (opzionale)

802.11 b/g/n

 

Modulo profibus (opzionale)

DP SLAVE

 

Modulo PROFINET (opzionale)

1 × RJ45

 

Modulo uscita analogica (opzionale)

4-20mA, 0-20mA, 0-10V

 

Ingressi/uscite (opzione)

12IN / 12OUT (IN – 5-24 VDC, OUT – max 30 VDC, 0,5 ADC)

 

Alimentatore

100 ÷ 240 V AC 50 / 60 Hz

 

Incremento massimo del segnale

19,5 mV

 

Minimum volatge per verification unit

0,4 µV

 

Maximum voltage per verification unit

3,25 µV

 

Impedenza della cella al carico minimo

50 Ω

 

Maximum load cell impedance

1200 Ω

 

Tensione di eccitazione della cella di carico

5V DC

 

Connessione di celle di carico

4 or 6 wires + shield

 

temperatura di lavoro

-10 ÷ +40

 °C

Umidita atmosferica

10% ÷ 85% RH no condensation

 

Touch panel

capacitive

 

Tastiera

panel touchscreen

 

Struttura

stainless steel

 

Sistema operativo

Microsoft Windows Embedded Compact 7

 

Processore

NVIDIA Cortex A9 Dual Core 1 GHz

 

Memoria

RAM 256 MB DDR2, 16GB - karta microSD

 

Numero massimo di piattaforme

6 (2 x internal weighing module + 4 x external weighing modules)

 

documentazione

specifiche tecniche
Publications and teaching materials
User Manual
(0.23 MB) EN
Save See the publication
User Manual
(0.72 MB) EN
Save See the publication
User Manual
(3.63 MB) EN
Save See the publication
Data Sheet
(0.18 MB) EN
Save See the publication
Data Sheet
(1.73 MB) EN
Save See the publication
Conformity Declaration
(0.04 MB) EN
Save See the publication
THBR System 2.0
(5.17 MB) EN
Save See the publication
Terminal and Scales Operated in Industry
(4.95 MB) EN
Save See the publication
HY10 - Full-featured Weighing Terminal
(2.55 MB) EN
Save See the publication

software

Drivers

GSD Profibus (1.321 KB)

GSD Profinet (4.324 KB)

Compatibile con

Basamenti HRP.H
Basamenti ad alta capacita HRP
Piattaforme con struttura in materiale plastico

Compatibile con

Dimensioni del piatto di pesata
Divisione
Capacita massima  [Max]
Verifica
nome prodotto:

PL3/6/D2

3 / 6 kg

-

195×195 mm

PL1,5/3/D2

1,5 / 3 kg

-

195×195 mm

PL0,6/1,5/D2

0,6 / 1,5 kg

-

195×195 mm

Piattaforme di pesatura in acciaio dolce verniciato a polvere
Piattaforme di pesatura in acciaio
Piattaforme di pesatura in acciaio dolce verniciato a polvere
Piattaforme di pesatura in acciaio
Piattafporme di pesatura in acciaio, versioni con base di carico a compasso
Piattaforma di pesatura in acciaio con rampa di carico
Audit Trail Reader

Accessori

nome prodotto:

caratteristiche generali

Audit Trail Reader

Audit Trail Reader ...

Sistema E2R
Editore di etichette R02
Editore parametri
Codice a barre R
R-LAB
RAD-KEY
RADWAG Connect
Studio di sviluppo RADWAG
RADWAG Remote Desktop
Driver LabVIEW
Cavo seriale RS 232, RS 485
Cavo seriale RS 232 (connessione bilance - Ethernet)

Radwag bilance e sistemi di pesatura

Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag
© 2019 Radwag bilance e sistemi di pesatura. Diritti riservati

Watch more
RADWAG videos

movie
Radwag WEBINARS