HY10.30.H3.K Multifunctional Scale

HY10.30.H3.K Multifunctional Scale view:1

Product code: WP-116-0015
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market.  The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
Verification
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market. The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
Verification
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market. The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
2 years warranty
Request for quotation

Overview

Maximum capacity [Max]: 30kg

Readability [d]: 10g


Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions.
The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a stainless steel weighing platform.
The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys.
The scales enables cooperation with an additional weighing platforms.
 
Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series:
  • programmable display and function keys,
  • designing custom printout templates,
  • designing text data indicated on terminal display.
Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable.
 
Scales HY10 series is available in dual range version on surcharge.

Media

Functions

Dosing

Dosing

Radwag Dosing
Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Radwag Labelling
Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Radwag Plus/Minus Control
Plus/Minus Control
Percent Weighing

Percent Weighing

Radwag Percent Weighing
Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Radwag Totalizing
Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Radwag Parts counting
Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Radwag Peak hold
Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Radwag Formulation
Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Newton unit measurement

Newton unit measurement

Radwag Newton unit measurement
Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.
Statistics

Statistics

Radwag Statistics
Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Radwag Checkweighing
Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
GLP Procedures

GLP Procedures

Radwag GLP Procedures
Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Radwag Animal weighing
Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Radwag Differential weighing
Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.<br />
Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Radwag Replaceable unit
Statistical Quality Control

Statistical Quality Control

Radwag Statistical Quality Control
ALIBI Memory

ALIBI Memory

Radwag ALIBI Memory
The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period.
Transactions

Transactions

Radwag Transactions

Datasheet

Maximum capacity [Max] 30 kg
Readability [d] 10 g
Weighing pan dimensions 410×410 mm
Tare range -30 kg
Operating temperature -10 ÷ +40 °C
Power supply 100 ÷ 240 V AC 50 ÷ 60 Hz 
Display 10,1" widescreen colour dispaly 1024x600 
Communication interface 2×RS 232, 2×USB, Ethernet, 4 IN / 4 OUT 
Packaging dimensions 670×510×330 mm
IP rating IP 68 construction, IP 68 (1h max)/69 indicator 
Atmospheric humidity 10÷85% RH no condensation 
Adjustment external 
Verification scale interval 10 g
OIML Class III 
Net weight/gross weight 16/18 kg

Documentation

Technical Documentation

User Manual Terminal HY10
3.63 MB EN

see the publication

Data Sheet
1.24 MB EN

see the publication

Conformity Declaration
0.03 MB EN

see the publication

Certificate of Health Quality
0.43 MB EN

see the publication

ISO 9001:2015 Certificate
0.63 MB EN

see the publication
Publications and teaching materials

Accessories

F1 Mass Standard - knob weights without adjustment chamber, set
Roller table
R-LAB
E2R SYSTEM
Label Editor R02
Audit Trail Reader
RADWAG Connect
RADWAG Remote Desktop
LabVIEW Driver
RADWAG Development Studio
R.Barcode
RAD-KEY
Parameter Editor
Receipt printer
Label Printers
Dust-free cabinets for printers
IN/OUT Cables
RS 232 cables (scale - Ethernet)
USB cable (scale - printer)
RS 232 cables (scale - computer)
RS 232 cables (scale - EPSON printer)
RS 232 cables (terminal - terminal)
RS 232 cables (scale - ZEBRA printer)
Keyboards, external switches
Barcode scanners

Accessories

Product name

Overview

DS2208 Barcode Scanner

DS2208 Barcode Scanner

DS2208 barcode scanner, as a new generation of LS2208 series, is a response to the tills and retail outlets need to read barcodes directly from mobile phones' s ...

LS2208 Barcode Scanner

LS2208 Barcode Scanner

Barcode scanner model Symbol LS2208 is a manual device designed for operation in adverse industrial conditions. Symbol LS2208 is ready to cooperate with ...

PD9330 Barcode Scanner

PD9330 Barcode Scanner

The Datalogic product range is now extended by series of PowerScan™ 9300 laser scanners. The device combines excellent functionality of PowerScan series with ne ...

PD9530 Barcode Scanner

PD9530 Barcode Scanner

Datalogic PowerScan PD9530 is a quick and reliable scanner intended for area imager barcodes. The scanner ensures omnidirectional readout of barcodes, even from ...

PM9300 Barcode Scanner

PM9300 Barcode Scanner

PowerScan™ PM9300 is a wireless version of PD9300 scanner. There are three types of the device: PM9300 – wireless model, PM9300-D – intermediate model with d ...

PM9500 Barcode Scanner

PM9500 Barcode Scanner

PM 9500 is a robust barcode scanner intended for industry. The scanner is equipped with 'Datalogic STAR Cordless' system which ensures excellent quality of wire ...

PM9300-D Barcode Scanner

PM9300-D Barcode Scanner

PowerScan™ PM9300 is a wireless version of PD9300 scanner. There are three types of the device: PM9300 – wireless model, PM9300-D – intermediate model with d ...

PD9330-AR Barcode Scanner

PD9330-AR Barcode Scanner

The Datalogic product range is now extended by series of PowerScan™ 9300 laser scanners. The device combines excellent functionality of PowerScan series with ne ...

PM9300-DK Barcode Scanner

PM9300-DK Barcode Scanner

PowerScan™ PM9300 is a wireless version of PD9300 scanner. There are three types of the device: PM9300 – wireless model, PM9300-D – intermediate model with d ...

Displays
Radwag Balances and Scales
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag Google Plus Radwag
® 2018 RADWAG Balances and Scales. All rights reserved.

See our movies
RADWAG