HY10.120.2.HRP.H Basamenti ad alta risoluzione

Radwag Bilance e sistemi di pesatura
Selected language Italiano
HY10.120.2.HRP.H Basamenti ad alta risoluzione
This image is for reference only.

HY10.120.2.HRP.H Basamenti ad alta risoluzione

Codice prodotto: WP-340-1014
close
Change the model:
Select all
Vista
Salva
Aggiungere a confrontare
Caratteristiche generali
Maximum Robustness
The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer.
Furthermore, they are known for:
  • the ability to weigh loads up to 150 kg on a large weighing pan with high accuracy and good repeatability,
  • minimum eccentricity error over the entire range,
  • quick and stable measurement (achievable within 1 second),
  • parameter stability over time and during transport,
  • weighing pan dimensions adapted to the accuracy of the balance.
All of this is possible thanks to the use of a measuring system based on RADWAG’s enhanced 

MONO

BLOCK® 
technology.
The new, taller and larger 

MONO

BLOCK® 
enables the best repeatability and speed in its class of high resolution industrial weighing platforms.
Automatic Adjustment
Automatic adjustment with an internal weight not only ensures the highest quality of work and repeatability of results, but it also saves time and is more convenient to use.
Application Versatility
The HY10.HRP scales are ideal for industrial environments requiring high measurement accuracy and repeatability, such as the pharmaceutical, chemical, and food industries.
The stainless steel terminals of the HY10.HRP and HX7.HRP scales allow them to be used in even the most demanding wet environments. 
Integration with Two Industrial Terminals
The HRP high resolution scales can work with one of two industrial terminals: PUE 7.1 or PUE HY10.
The PUE 7.1 terminal features:
  • 5.7”, resistive, colour display,
  • touch-sensitive keypad,
  • ABS housing,
  • IP 43,
  • communication interfaces: RS 232 (2), USB-A (2), Ethernet, IN/OUT (4), Wi-Fi®,
  • optional extra modules: module of an additional A/D DP6 converter.
The PUE HY10 terminal features:
  • 10.1”, graphic, colour display,
  • touch-sensitive keypad,
  • stainless steel housing,
  • IP 68/69,
  • communication interfaces: RS 232 (2), USB (2), Ethernet, IN/OUT (4),
  • optional extra modules: Wi-Fi®, RS 485, Profibus, Profinet, analog output module, IN/OUT (12).
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
Foglio di calcolo
Capacita massima  [Max]

120

 kg

Pesata minima

50

 g

Intevallo di precarico

30

 kg

Accuratezza

0,5

 g

Intervallo di tara

-120

 kg

Ripetibilita

0,3

 g

Linearita

±2

 g

Tempo di stabilizzazione

3

 s

Calibrazione

internal (automatic)

 

Display

10″ graphic colour touchscreen

 

Dimensioni del piatto di pesata

500×500

 mm

Dimensioni del pacco

584×584×232

 mm

Peso netto

37

 kg

Peso lordo

52

 kg

Punteggio IP

IP 66/67 construction, IP 68/69 indicator

 

Costruzione

Stainless steel AISI304

 

Materiale da pesata

Stainless steel AISI304

 

Interfaccia

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital)

 

Interfacce opzionali

module Wi-Fi® 802.11 b/g/n, module Profibus (DP SLAVE), module RS485, module PROFINET (RJ45), analog output module (4-20mA, 0-20mA, 0-10V) , 12IN / 12OUT (IN – 5-24 VDC, OUT – max 30 VDC, 0,5 ADC)

 

Alimentatore

100 – 240 V AC 50/60 Hz

 

Temperatura di lavoro

+10 — +40

 °C

Umidita atmosferica

40% — 80%

 

CE
Garanzia 2 anni
Video
High Resolution Scales by RADWAG – Extremely Robust & Impressively Accurate
Complete Solutions for Mass Measurement in Pharma Industry
HY10 Advanced weighing terminal
RADWAG Remote Desktop
RADWAG Remote Desktop - Windows 10
funzioni
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Transactions

Transactions

Complex weighing mode for registration of weighings that are part of transactions such as sale, purchase and warehouse transfer. You can create a new transaction using the scale. It is possible to pause the transaction or abort it.  The function supports warehouse management in an enterprise.
Documentazione
Data Sheet Data Sheet
Data Sheet

Vista
Vista
Salva
Salva

Choose more product:
Vista Vista SalvaSalva
Software Manual - CBCP 03
Software Manual - CBCP 03
Vista
Vista
Salva
Salva
(0.23 MB)
User Manual - PUE HY10
User Manual - PUE HY10
Vista
Vista
Salva
Salva
(2.19 MB)
Start up Guide
Start up Guide
Vista
Vista
Salva
Salva
(1.38 MB)
User Manual - HY10 multifunctional scales
User Manual - HY10 multifunctional scales
Vista
Vista
Salva
Salva
(1.88 MB)
 Software Manual - PUE HY10
Software Manual - PUE HY10
Vista
Vista
Salva
Salva
(7.10 MB)
Software Manual - Radwag-Mass -Node-RED
Software Manual - Radwag-Mass -Node-RED
Vista
Vista
Salva
Salva
(0.57 MB)
 Software Manual - PROFIBUS communication protocol of PUE HY10
Software Manual - PROFIBUS communication protocol of PUE HY10
Vista
Vista
Salva
Salva
(0.65 MB)
Software Manual - MODBUS RTU communication protocol of PUE 7.1 / PUE HY10
Software Manual - MODBUS RTU communication protocol of PUE 7.1 / PUE HY10
Vista
Vista
Salva
Salva
(0.74 MB)
Quick start
Quick start
Vista
Vista
Salva
Salva
(2.47 MB)
User Manual - Connecting External Platform
User Manual - Connecting External Platform
Vista
Vista
Salva
Salva
(0.99 MB)
Software Manual - PROFINET communication protocol of HRP platforms
Software Manual - PROFINET communication protocol of HRP platforms
Vista
Vista
Salva
Salva
(2.02 MB)
User Manual - HRP Weighing Platforms
User Manual - HRP Weighing Platforms
Vista
Vista
Salva
Salva
(2.21 MB)
 Software Manual - PROFINET communication protocol of PUE HY10
Software Manual - PROFINET communication protocol of PUE HY10
Vista
Vista
Salva
Salva
(1.82 MB)
Conformity Declaration
Conformity Declaration
Vista
Vista
Salva
Salva
(0.04 MB)
RTP Thermal Receipt Printer
RTP Thermal Receipt Printer
Vista
Vista
Salva
Salva
(1.64 MB)
THBR System 2.0
THBR System 2.0
Vista
Vista
Salva
Salva
(5.17 MB)
HRP High Resolution Scales
HRP High Resolution Scales
Vista
Vista
Salva
Salva
(9.41 MB)
Stainless Steel in RADWAG products. Standard and special applications
Stainless Steel in RADWAG products. Standard and special applications
Vista
Vista
Salva
Salva
(2.23 MB)
PUE HY10 - Weighing Terminal
PUE HY10 - Weighing Terminal
Vista
Vista
Salva
Salva
(2.55 MB)
Accessori
Radwag bilance e sistemi di pesatura
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 Radwag bilance e sistemi di pesatura. Diritti riservati

selezionare

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
E-mail
nome azienda:
Nome:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩