Balanzas de alta resolución HY10.16.HRP

Balanzas de alta resolución HY10.16.HRP view:1

Código de producto: WP-330-0010
Simboliza la conformidad del producto con las normas de la Unión Europea, que se aplican al uso de este producto, colocar el marcado CE de un producto es una declaración de la persona responsable de que el producto cumple con las normas generales de seguridad establecidos en las directivas de la marca CE.
CE
Simboliza la conformidad del producto con las normas de la Unión Europea, que se aplican al uso de este producto, colocar el marcado CE de un producto es una declaración de la persona responsable de que el producto cumple con las normas generales de seguridad establecidos en las directivas de la marca CE.
Preguntar sobre producto

Descripción

Maxima capacidad: 16kg

Legibilidad [d]: 0,1g


La balanza HY10.HRP es una nueva serie de balanzas de alta resolución, la solución perfecta para cualquier industria. Que permiten realizar mediciones con gran precisión, anteriormente han sido disponibles sólo para las mediciones de laboratorio. La construcción de acero pintado o acero inoxidable y grado de protección IP67, permite el trabajo en los ambientes industriales adversos. La base para el trabajo seguro es un sistema de protección contra sobrecargas y daños mecánicos. Está equipada en una serie de interfaces de comunicación que permiten la colaboración con los sistemas informáticos, terminales de operador, cabezas de peso, indicadores de peso externos y controladores PLC. La seguridad de datos y copia de seguridad de los resultados de trabajo proporciona software de la empresa RADWAG.

Media

Funciones

Dosing

Dosing

Radwag Dosing
Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Radwag Labelling
Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Radwag Plus/Minus Control
Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Radwag Percent Weighing
Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Radwag Totalizing
Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Radwag Parts counting
Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Radwag Peak hold
Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Radwag Formulation
Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Newton unit measurement

Newton unit measurement

Radwag Newton unit measurement
Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.
Statistics

Statistics

Radwag Statistics
Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Radwag Checkweighing
Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
GLP Procedures

GLP Procedures

Radwag GLP Procedures
Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Radwag Animal weighing
Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Radwag Differential weighing
Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Radwag Replaceable unit
Replaceable units.
Statistical Quality Control

Statistical Quality Control

Radwag Statistical Quality Control
ALIBI Memory

ALIBI Memory

Radwag ALIBI Memory
"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Transactions

Transactions

Radwag Transactions

Datos tecnicos

Maxima capacidad 16 kg
Minima cacacidad 5 g
Legibilidad [d] 0,1 g
Dimensión de platillo 360×280 mm
Rango de tara -16 kg
Repetibilidad 0,1 g
Linealidad ±0,1 g
Tiempo de estabilización 2 s
Deriva de sensibilidad 2 ppm/°C en la temperatura +10° ÷ +40 °C 
Temperatura de trabajo +10° ÷ +40°C 
Alimentacion 100 ÷ 240 V AC 50 ÷ 60 Hz 
Pantalla 10,1" de panorámica color 1024×600 
Control de protección IP 66/67 construcción, IP 68/69 medidor 
Humedad relativa de aire 40% ÷ 80% 
Calibración interna 
Masa neto 24,7 kg
Masa bruto 28,7 kg
Entradas/Salidas 4 ENTRADAS / 4 SALIDAS 
Ethernet ×1 
USB ×2 
RS 232 ×2 
Precarga 4 kg

Documentación

Documentaciones técnicas

Manual de instrucciones Terminal HY10
3.63 MB ES

see the publication

Manual de instrucciones Platforma HRP
2.21 MB ES

see the publication

Folleto de producto
1.41 MB ES

see the publication
Publicaciones y materiales didácticos

Programas

Drivers

LabVIEW (3.05 MB)

Software

R-Lab (149.39 MB)
Descargar la versión del software con un límite de 1.000 pesajes

Accesorios

R-LAB
E2R SISTEMA
EDITOR DE ETIQUETAS R02
Audit Trail Reader
RAD KEY
Parameter Editor
R.Barcode
RADWAG Development Studio
Controlador LabVIEW “Radwag Balances & Scales”
RADWAG Connect
RADWAG Remote Desktop

Accesorios

Nombre de producto

Descripción

RADWAG Remote Desktop

RADWAG Remote Desktop

...

Impresoras de etiquetas
Cables RS 232 (Bascula a Impresora ZEBRA)
Cables RS 232 (terminale a terminale)
Cables RS 232 (Bascula a Impresora EPSON)
Cables RS 232, RS 485
Cable USB (Bascula a Impresora)
Cables de corriente (Bascula a Ethernet)
Cables Entradas/Salidas
Teclado, manipuladores
Escáner de códigos de barra
Pantallas
Radwag Balances and Scales
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag Google Plus Radwag
® 2018 RADWAG Balances and Scales. All rights reserved.

See our movies
RADWAG