Workstation for Pipettes Calibration SDKP DUAL

SDKP DUAL Workstation for Pipettes Calibration

In order to ensure measurement traceability, meet all the requirements resulting from supervision over measuring equipment and to facilitate the process of pipettes calibration RADWAG recommends effective and ergonomic solution for calibrating automatic pipettes conducted by a user - complete workstation for pipettes calibration.

Application:
Calibration of automatic pipettes:

with fixed volume
with adjustable volume.

Unit contents:

table for calibration
anti-vibration table x2
probe for temperature, humidity and pressure measurement
probe for water temperature measurement
sink for used water
armrests
LCD monitor
PC with pre-installed software PIPETTES RADWAG
absorbtion pump
power supply
keyboard and mouse
container for used water

Adapters for pipettes calibration
Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table presents the minimum reguirements in accordance with ISO 8655 standard. It also enables to select suitable adapter for pipette calibration and respective balance version.

Selected volume¹
of apparatus under test
V

Resolution
mg

Repeatability
and linearity mg

Recommended balance

1 µl ≤ V ≤ 10 µl

0,001

0,002

MYA 21.5Y PLUS

MYA 21.5Y

XA 6/21.5Y.M.A PLUS

XA 6/21.5Y.M.A

XA 6/21.5Y.M

10 µl ≤ V ≤ 100 µl

0,01

0,02

XA 82/220.5Y.A PLUS

XA 82/220.5Y.A

XA 82/220.5Y

XA 120/250.5Y.A PLUS

XA 120/250.5Y.A

XA 120/250.5Y

100 µl ≤ V ≤ 1000 µl

0,1

0,2

1 ml < V ≤ 10 ml

0,1

0,2

Adapter for pipette calibration

MY 11

XA 11

XA 17

XA 100

XA 17

XA 100

Maximum vessel capacity

11 ml

17 ml

100 ml

17 ml

100 ml

Weighing vessel mass

~ 10 g

~ 11 g

~ 65 g

~ 11 g

~ 65 g

¹ For practical purposes, the nominal volume may be used to choose the balance [Reference: ISO8655-6:2002, pg. 2].
If the standard uncertainty of measurement of the balance is known (e.g. from the balance calibration certificate), it may be used instead of the repeatability and linearity. The standard uncertainty of measurement shall not be more than two to three times the resolution [Reference: ISO8655-6:2002, pg. 2].

Datasheet

Delivery components	table for calibration, anti-vibration table ×2, probe for temperature, humidity and pressure measurement, probe for water temperature measurement, sink for used water, armrests, LCD monitor, PC with pre-installed software PIPETTES RADWAG, power supply, keyboard and mouse, container for used water
Chamber packaging size	820×1410×1000 mm
Gross weight	250 kg
Length	1350 mm
Width	750 mm
Height	1100 mm
Number of workstations	2