PUE 7.1 Terminal in Indicators and Terminals - Radwag Balances And Scales

PUE 7.1 Terminal

Radwag Balances and Scales - Advanced Weighing Technologies
Selected language English
PUE 7.1 Terminal in Indicators and Terminals
This image is for reference only.
PUE 7.1 Terminal
Product code: WX-008-0025
Select model (2)
Overview
The PUE 7.1P terminal is a constructional component of industrial load cell scales. It is equipped with 5.7" TFT display featuring a touch panel and a membrane keypad. The device offers two... More ››
close
Select model:
PUE 7.1 Terminal
PUE 7.1P (panel) Terminal
Select all
View
Download
Request a Quote
Overview
The PUE 7.1P terminal is a constructional component of industrial load cell scales. It is equipped with 5.7" TFT display featuring a touch panel and a membrane keypad.
The device offers two proximity sensors which can be programmed using the menu. It can connect with maximum 2 weighing platforms, a barcode scanner, a printer, a labeller, RFID reader and PC equipment (mouse, keyboard, USB flash drive). Standard PUE 7.1P terminal communicates with 1 weighing platform, and is provided with an extended communication interface offering 2×USB, 2×RS 232, Ethernet, 4inputs/4outputs (digital), Wi-Fi®.

It is possible to expand the PUE 7.1 terminal with 1 extra platform, this is done by installation of an additional platform module, DP-6.

Caution: in case of a terminal supporting 2 weighing platforms, only cable version is available (/R version does not exist).
 

Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
Datasheet
Maximum quantity of verification units

6000 e

 

OIML Class

III

 

Maximum increase of signal

19.5 mV

 

Minimum volatge per verification unit

0.4 µV

 

Maximum voltage per verification unit

3.25 µV

 

Minimum load cell impedance

50 Ω

 

Maximum load cell impedance

1200 Ω

 

Load cell excitation voltage

5V DC

 

Display

5.7” resistive colour touchscreen

 

Device dimensions

206×140×71

 mm

Packaging dimensions

300×250×130

 mm

Net weight

0.8

 kg

Gross weight

1.2

 kg

Protection class

IP 43

 

Number of buttons

8

 

Database capacity

16 GB (micro SD)

 

Communication interface

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

 

Additional DP6 A/C converter module

1 (option)

 

Power consumption max.

max. 1 A

 

Operating temperature

-10 — +40

 °C

Relative humidity

10% — 85% RH no condensation

 

Keypad

panel touchscreen

 

Housing

ABS plastic

 

Operating system

Linux

 

Processor

quad-core 64-bit Cortex-A53 1.2 GHz

 

Memory

RAM 1GB LPDDR2

 

Data memory

16 GB (micro SD)

 

Max number of platforms

2

 

Features
Interfaces

Interfaces

  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n
Functions
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Documentation
Datasheet
Data Sheet


View

Download

Choose more product:
View Download
User Manuals
Software Manual - CBCP 03

View

Download
(0.23 MB)
Start up Guide

View

Download
(1.69 MB)
Software Manual - MODBUS RTU communication protocol of PUE 7.1 / PUE HY10

View

Download
(0.74 MB)
Software Manual - Appendices 01

View

Download
(1.81 MB)
User Manual - PUE 7.1

View

Download
(1.73 MB)
Software Manual - PUE 7.1

View

Download
(6.55 MB)
Conformity Declarations
Conformity Declaration

View

Download
(0.04 MB)
Publications and Brochures
PUE 7.1 Terminal

View

Download
(2.33 MB)
Terminals and Platforms

View

Download
(3.72 MB)
Compatible with
Stainless steel HRP.H platforms

Compatible with

High Resolution Platforms PL.16.HRP.H

High Resolution Platforms PL.32.HRP.H

High Resolution Platforms PL.120.HRP.H

High Resolution Platforms PL.150.HRP.H

High Resolution Platforms PL.62.HRP.H

High Resolution Platforms PL.300.HRP.H

High Resolution Platforms PL.300.1.HRP.H

High Resolution Platforms PL.600.HRP.H

High Resolution Platforms PL.1100.HRP.H

High Resolution Platforms PL.2000.HRP.H

High Resolution Platforms PL.16.HRP.H.M2.1

High Resolution Platforms PL.16.HRP.H.M2.2

High Resolution Platforms PL.16.HRP.H.M3

High Resolution Platforms PL.32.HRP.H.M2.1

High Resolution Platforms PL.32.HRP.H.M2.2

High Resolution Platforms PL.32.HRP.H.M3

High Resolution Platforms PL.120.HRP.H.M2.1

High Resolution Platforms PL.120.HRP.H.M2.2

High Resolution Platforms PL.120.HRP.H.M3

High Resolution Platforms PL.150.HRP.H.M2.1

High Resolution Platforms PL.150.HRP.H.M2.2

High Resolution Platforms PL.150.HRP.H.M3

High Resolution Platforms PL.62.HRP.H.M2.1

High Resolution Platforms PL.62.HRP.H.M2.2

High Resolution Platforms PL.62.HRP.H.M3

High Resolution Platforms PL.300.HRP.H.M2.1

High Resolution Platforms PL.300.HRP.H.M2.2

High Resolution Platforms PL.300.HRP.H.M3

High Resolution Platforms PL.300.1.HRP.H.M2.1

High Resolution Platforms PL.300.1.HRP.H.M2.2

High Resolution Platforms PL.300.1.HRP.H.M3

High Resolution Platforms PL.600.HRP.H.M2.1

High Resolution Platforms PL.600.HRP.H.M2.2

High Resolution Platforms PL.600.HRP.H.M3

High Resolution Platforms PL.1100.HRP.H.M2.1

High Resolution Platforms PL.1100.HRP.H.M2.2

High Resolution Platforms PL.1100.HRP.H.M3

HRP Platforms High Capacity
Waterproof stainless steel platforms
Mild steel powder coated weighing platforms
Platforms in plastic casing
Ramp stainless steel platforms
Stainless steel ramp platforms with LD lifting system
Stainless steel platforms, pit version
Waterproof stainless steel platforms
Mild steel powder coated weighing platforms
Audit Trail Reader

Compatible with

E2R System
Label Editor R02

Compatible with

Scales Editor 2.0

Compatible with

R.Barcode

Compatible with

R-LAB

Compatible with

RAD-KEY

Compatible with

RADWAG Connect

Compatible with

RADWAG Development Studio
RADWAG Remote Desktop

Compatible with

LabVIEW Driver
Receipt Printer
Label Printers
USB Hubs

Compatible with

RS 232 – USB Converter
AP2-1 Current Loop Unit
IN/OUT Cables

Compatible with

Cigarette lighter receptacle power supply cables

Compatible with

RS 232, RS 485 cables
RS 232 cables (scale - EPSON printer)

Compatible with

Keypad, external switches
Barcode scanners
Stands, wall mounting kits and mounting brackets
Displays
Radwag Balances and Scales
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2021 RADWAG Balances and Scales. All rights reserved.

Select language

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Subscribe
Facebook
Youtube
Vimeo
LinkedIn
Webinars
close