Microbalanzas XA 53.5Y.M.A.P

Radwag Balanzas Electrónicas
Selected language Español
Microbalanzas XA 53.5Y.M.A.P
This image is for reference only.

Microbalanzas XA 53.5Y.M.A.P

Código de producto: WL-112-0003
Change the model (5)
done
Max: 53gd: 1µg

 ø26mm
expand_more
Max: 6/21gd: 1/2µg

 ø26mm
Max: 21/52gd: 1/5µg

 ø26mm
Max: 21gd: 1µg

 ø26mm
Max: 52gd: 5µg

 ø26mm
Maxima capacidad [Max]: 53 g
Legibilidad [d]: 1 µg

close
Change the model:
Microbalanzas XA 6/21.5Y.M.A.P
Microbalanzas XA 21/52.5Y.M.A.P
Microbalanzas XA 21.5Y.M.A.P
Microbalanzas XA 52.5Y.M.A.P
Microbalanzas XA 53.5Y.M.A.P
Select all
Ver
Guardar
Para comparar Búsqueda avanzada
Descripción

Microbalanzas XA 53.5Y.M.A.P

 
¿Necesita una balanza que no solo determine el peso con una precisión impresionante, sino que también realice una auditoría digital, responda a sus comandos de voz y le envíe mensajes ligeros?
 
 
Si es así, conozca la funcionalidad de la serie de balanzas ELLIPSIS:
 
 
 

Digital Weighing Auditor

se asegura de que su balanza esté lista para funcionar. Permitirá la compensación de la flotabilidad del aire en tiempo real. Asimismo, informará sobre la necesidad de realizar una revisión de balanza o una auditoría periódica de precisión y sensibilidad de la balanza.
 
 
 
 

Pantalla de 10 pulgadas

La pantalla más grande – 10’’ – significa más información en un solo lugar.
En el nuevo terminal ELLIPSIS puede ver hasta 3 pantallas, widgets, gráficos, estados, notas y un práctico historial de mediciones.
 
 
 
 
 
 

Una manera intransigente de verificar al usuario

Por primera vez en la historia, la balanza verificará al usuario mediante una contraseña, una tarjeta RFID, un lector de huellas dactilares, reconocimiento facial o cualquier combinación de los mismos.
 
 
 
 
 

Ambient Light – una forma innovadora de comunicación entre la balanza y el usuario

El color de retroiluminación le informa sobre el estado, los resultados del proceso, los procedimientos o las alertas.
 
 
 
 
 
 
 

Hotspot

Use la balanza en cualquier dispositivo conectado. Puede ser un teléfono inteligente, una tableta o un ordenador.
 
 
 

RFID

ELLIPSIS funciona con etiquetas RFID* que se pueden usar para marcar sus productos o ingredientes de recetas en la base de datos. Además, se pueden utilizar para identificar al usuario.
 
 
 
 
 

Live Note – tome nota de sus conclusiones

Esta es la primera vez que agrega una nota de voz a una serie de mediciones
o un informe de procedimiento. Si prefiere escribirlo, ELLIPSIS le permitirá agregar una nota de texto.
 
 
 
 
 

Handy Library

Aquí es donde verá una serie de mediciones recientes o un informe listo para
la firma digital según 21 CFR Parte 11.
 
 
 
 

Widgets

Preparado para mostrar lo que más necesitas en este momento.
 
 
 
 
 

Nivelación automática de la balanza ReflexLEVEL System

En lugar de nivelar manualmente su balanza, nivélela automáticamente.
El Sistema ReflexLEVEL le ahorra tiempo y le brinda la máxima precisión en sus mediciones.
 
 
 
 
 

Smart Min Weight

La balanza muestra si el valor del peso que desea pesar está por debajo o por encima del umbral de peso mínimo.
 
 

Ionizador

¿Tiene una muestra electrostática que no se puede pesar? El ionizador neutralizará las cargas electrostáticas de la muestra.
 
 
 

21 CFR Parte 11

¿Trabajas en la industria farmacéutica? ¿Necesita una firma digital?
 
Ofrecemos una balanza de laboratorio que, como dispositivo independiente, cumple con los requisitos de 21 CFR Parte 11/ EU GMP Anexo 11.
 
- Seguridad total de datos
- Firmas electrónicas
- Validaciones
- Registros electrónicos
- Pistas de auditoría
 
 
 

Ajuste de dos puntos

El ajuste, que tiene lugar en dos puntos de medición en lugar de uno, mejora la precisión de la medición en todo el rango de pesaje. ¿Y qué significa esto para ti? Medición más precisa.
 
 
 
 
 
* RFID ISO/IEC 14443 Type A, 13,56 MHz
 
Datos tecnicos
Maxima capacidad [Max]

53

 g

Minima capacidad

0,1

 mg

Legibilidad [d]

1

 µg

División de legalización [e]

1

 mg

Rango de tara

-53

 g

Repetibilidad estándar [5% Máx.]

1,5

 µg

Repetibilidad estándar [Máx.]

6

 µg

Porción mínima estándar (USP)

3

 mg

Porción mínima estándar (U = 1%, k = 2)

0,3

 mg

Repetibilidad permitida [5% Máx.]

2,4

 µg

Repetibilidad permitida [Máx.]

8

 µg

Linealidad

±20

 µg

Excentricidad

20

 µg

Estabilidad de sensibilidad

1×10⁻⁶/Ano×Rt

 

Tiempo de estabilización

~3,5

 s

Calibración

interna (automatica)

 

Clase OIML

I

 

Sistema de nivelación

automático - Reflex Level System

 

Pantalla

10″ gráfico color pantalla táctil

 

Puerta de la cámara de pesaje

automáticos

 

Elementos del set

Microbalanza, platillo, protección del platillo, adaptador de CA, adaptador automático para calibración de pipetas: (base, anillo inferior, recipiente de vidrio, adaptador para calibración de pipetas, cortina de vapor, platillo, tapa de vidrio, tapa de cierre mecánico, tornillo de fijación), cepillo, funda.

 

Camara de pesaje

199×170×217

 mm

Capacidad

11 ml

 

Dimensión de platillo

ø26

 mm

Dimensiones de embalaje

750×492×595

 mm

Masa neta

14,5

 kg

Masa bruta

18,9

 kg

Grado de protección

IP 43

 

Conectividad

2×USB-A, USB-C, HDMI, Ethernet, Wi-Fi®, Hotspot

 

Alimentacion

Adapter: 100 – 240V AC 50/60Hz 1A; 15V DC 2,4A
Balanza: 12 – 15V DC 1,4A max*

 

Temperatura de trabajo

+10 — +40

 °C

Ritmo de cambios de temperatura de trabajo

±0,3°C/1h (±1°C/8h)

 

Humedad relativa de aire

40% — 80%

 

Ritmo de cambios de humedad relativa

±1%/h (±4%/8h)

 

CE
Legalización Extra payment
for verification
5 año de garantía

La repetibilidad se expresa como una desviación estándar de 10 posiciones de carga.
El tiempo de estabilización depende de las condiciones externas y la dinámica de colocar los pesos en el platillo; especificado para el perfil FAST.
La fuente de alimentación se puede conectar al enchufe en la parte posterior de la carcasa de la balanza o al terminal.

360°

Vídeos
Percentage deviations
5Y Functions: Weighing
5Y Functions: Parts counting
5Y Functions: Proximity Sensors – Touch-Free Control (Tutorial)
5Y Functions: GLP Procedures – Objective Documentation of Measurements (Tutorial)
Weighing Printout Design in Analytical and Precision Balances (Tutorial)
Impresión fácil con las impresoras térmicas de recibos Wifi® de RADWAG
ELLIPSIS – New Balance by RADWAG
ELLIPSIS – Cutting Edge, Innovative, New
Talk to it. Voice Commands in New ELLIPSIS Balance by RADWAG
310 ELLIPSIS – Scan or Tap to Log In
Remote VPN Support on ELLIPSIS Balances
ELLIPSIS – Unlimited Connections
Connecting RADWAG RTP-UEW80 Printer via Wi-Fi® (Tutorial)
XA 5Y.M Unpacking and Installation (Tutorial)
RTP - The First Receipt Printer of RADWAG Production!
Complete Solutions for Mass Measurement in Pharma Industry
New AS and PS 5Y Balances – Autotest (Tutorial)
Funciones
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Automatic sliding door

Automatic sliding door

Automatic side panes opened via touch-free IR sensors.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Wi-Fi®

Wi-Fi®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Documentación
Tarjetas de productos
Data Sheet Data Sheet
Data Sheet

Ver
Ver
Guardar
Guardar

Choose more product:
Ver Ver GuardarGuardar
Manual de usuario
User Manual
User Manual
Ver
Ver
Guardar
Guardar
(2.36 MB)
User Manual
User Manual
Ver
Ver
Guardar
Guardar
(1.24 MB)
Software Manual
Software Manual
Ver
Ver
Guardar
Guardar
(1.23 MB)
Manual de instrucciones
Manual de instrucciones
Ver
Ver
Guardar
Guardar
(5.41 MB)
Start up Guide
Start up Guide
Ver
Ver
Guardar
Guardar
(4.76 MB)
Software Manual
Software Manual
Ver
Ver
Guardar
Guardar
(0.95 MB)
Declaraciones de conformidad
Conformity Declarations
Conformity Declarations
Ver
Ver
Guardar
Guardar
(0.04 MB)
Publicaciones y folletos
Laboratory balance cleaning
Laboratory balance cleaning
Ver
Ver
Guardar
Guardar
(2.52 MB)
RTP Thermal Receipt Printer
RTP Thermal Receipt Printer
Ver
Ver
Guardar
Guardar
(1.64 MB)
LABORATORY-实验室天平精简彩页-CN
LABORATORY-实验室天平精简彩页-CN
Ver
Ver
Guardar
Guardar
(3.47 MB)
Diccionario de Términos Metrológicos Básicos
Diccionario de Términos Metrológicos Básicos
Ver
Ver
Guardar
Guardar
(17.15 MB)
RFID
RFID
Ver
Ver
Guardar
Guardar
(0.68 MB)
Hybrid Protective Glass
Hybrid Protective Glass
Ver
Ver
Guardar
Guardar
(1.86 MB)
Micro Scale Measurement
Micro Scale Measurement
Ver
Ver
Guardar
Guardar
(2.74 MB)
Laboratory Balances
Laboratory Balances
Ver
Ver
Guardar
Guardar
(1.68 MB)
Weighing systems for calibration  and verification of piston pipettes
Weighing systems for calibration and verification of piston pipettes
Ver
Ver
Guardar
Guardar
(5.27 MB)
ELLIPSIS Balanzas de laboratorio de la serie 5Y
ELLIPSIS Balanzas de laboratorio de la serie 5Y
Ver
Ver
Guardar
Guardar
(30.37 MB)
Accesorios
R-LAB

Accesorios

RADWAG Balanzas Electrónicas
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 RADWAG Balances and Scales. All rights reserved.

Selecionar idioma

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
E-mail:
Nombre de empresa
Nombre:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩