Balanza de precisión WTC 600

Balanza de precisión WTC 600 - RADWAG Balanzas Electrónicas
This image is for reference only.

Código de producto: WL-210-0008
Preguntar sobre producto

Descripción

Maxima capacidad: 600g
Legibilidad [d]: 0,01g

Las balanzas WTC son dedicadas al pesaje muy rápido y exacto en el ambiente de laboratorio.Pueden funcionar en lugares alejados de una fuente de alimentación eléctrica ya que son equipadas de un acumulador interno como estandár.

Balanzas

tienen un plato de acero inoxidable, un interfaz RS 232, USB-A, USB-B y una pantalla retroiluminada LCD.
Interfaces de comunicación: 2×RS232, USB tipo A, USB tipo B permiten la cooperación con dispositivos externos como una impresora, un ordenador, un pen drive, una pantalla adicional. Las balanzas también tienen un reloj en tiempo real y una memoria de pesaje ALIBI. Opcionalmente, las balanzas pueden equiparse con 4 ENTRADAS / 4 SALIDAS.

Funciones

Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Newton unit measurement

Newton unit measurement

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Datos tecnicos

Maxima capacidad

600

 g

Legibilidad [d]

0,01

 g

Rango de tara

-600

 g

Repetibilidad

0,01

 g

Linealidad

±0,02

 g

Tiempo de estabilización

2

 s

Calibración

externa

 

Pantalla

LCD (con retroiluminación)

 

Control de protección

IP 43

 

Communication interface

RS232, USB-A, USB-B

 

Alimentacion

100 ÷ 240 V AC 50 / 60 Hz + bateria

 

Consumo de potencia

6 W

 

Horas de trabajo con baterias

15 horas (el tiempo promedio)

 

Temperatura de trabajo

+15 ÷ +30

 °C

Dimensión de platillo

128×128

 mm

Dimensiones de embalaje

330×230×140

 mm

Masa

1,3/2

 kg

Documentación

Documentaciones técnicas

Manual de instrucciones
(1.25 MB) ES

Save
See the publication

Instrukcja oprogramowania
(0.29 MB) ES

Save
See the publication

Folleto de producto
(0.88 MB) ES

Save
See the publication

Declaración de conformidad
(0.04 MB) ES

Zapisz
See the publication

Programas

Drivers

RADWAG USB DRIVER 1.6.2 (1.25 MB)

LabVIEW (3.05 MB)

Software

R-Lab (149.39 MB)
Descargar la versión del software con un límite de 1.000 pesajes

Accesorios

R-LAB
RAD KEY
Controlador LabVIEW “Radwag Balances & Scales”
Impresoras de recibos
Cables RS 232 (Bascula a Impresora EPSON)
Cables RS 232, RS 485
Cables de corriente desde mechero de automóvil

RADWAG Balanzas Electrónicas

Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag Google Plus Radwag
© 2019 RADWAG Balances and Scales. All rights reserved.

See our movies
RADWAG