PMV 50 PLUS moisture analyzer is an advanced solution for measurement of moisture content of samples containing significant amount of moisture (up to 100%). The drying process is carried out by means of microwaves which enable to evenly heat the whole sample's volume. The PMV 50 PLUS, when compared to standard moisture analyzers, significantly shortens the drying time.
The PMV 50 PLUS microwave moisture analyzer can be successfully used wherever materials containing large amounts of water are dried, for example: dairy products, fish, meat, fruit products, syrups, creams, liquid resin.
The sample is placed in the drying chamber on a glass fibre filter. At the bottom of the chamber there is one end of the waveguide from where the microwaves are emitted. Upon process start, microwaves are equally distributed on the filter's surface and dry the sample. The moisture content is determined on the basis of the mass loss obtained during drying.
A respective drying program is selected depending on sample mass and its chemical composition. The average duration of this process depends on the type and mass of used substance, and takes 1 to 10 minutes. In contrast, drying using the traditional halogen moisture analyzer takes 5 to 40 minutes.
The PMV 50 PLUS microwave moisture analyzer is equipped with a temperature sensor and enables to monitor device power in order to prevent exceeding the boiling point during the process. A preset microwave power is displayed on the indicator throughout the drying procedure.
Features:
Intended for drying of samples containing significant amount of moisture (up to 100%)
Ultra-short drying time when compared to traditional moisture analyzers and standard drying methods
Microwave-based solution
Uniform heating of entire sample's surface
Complex database of drying programs
Finish mode: manual, automatic, time-defined, user-defined
Advanced reports, time and statistical graphs
Easy operation due to a touch screen
The PMV 50 PLUS moisture analyzer is based on an advanced-class Y series system intended for laboratory balances. Expanded 16 GB memory enables saving and storing sophisticated reports and time and statistical graphs. Wireless communication improves ergonomics and operation safety. Wi-Fi
® enables sending data between the moisture analyzer and a mobile device. Large 5.7’’ touch screen guarantees comfort of operation. Proximity sensors ensure touch-free access to user-specified operations.
For each purchase of the PMV 50 moisture analyzer the customer is supplied with:
60 glass fibre filters of ø 90 mm,
a sample of sodium chloride 10% ±0,5% to determine correctness of the operation at the workstation,
a service concerning determination of drying parameters for five customer-selected samples carried out by RADWAG employee.
The results obtained using the moisture analyzer (the final result of the drying process):
% M – the mass loss in % displays the mass change recorded during the drying process, expressed as a percentage,
% D – the dry mass obtained during the drying process, expressed as a percentage the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated,
% R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage the result is the portion of the sample that evaporated during the drying process,
g – the sample mass after drying.
* All trademarks and registered trademarks are the property of their respective owners.
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications
Wi-Fi
® is a registered trademark of Wi-Fi Alliance
®.
Maximum capacity [Max] |
50 g |
Readability [d] |
0.1 mg |
Tare range |
-50 g |
Adjustment |
external |
Maximum sample weight |
50 g |
Heating module |
microvawe radiation emiter |
Moisture content readability |
0.0001% |
Display |
5.7” resistive colour touchscreen |
Packaging dimensions |
670×510×570 mm |
Protection class |
IP 43 |
Weighing pan material |
glass fibre filter ø 90 mm |
Communication interface |
RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi® |
Power supply |
100-240 V AC 50/60 Hz¹ |
Heating module power |
800 W |
Operating temperature |
+10 — +40 °C |
Finish mode |
4 modes (automatic, manual, time-defined, user-defined) |
1 100-130 V AC 50/60 Hz (version A)
200-240 V AC 50/60 Hz (version B)
Microwave moisture analysis
Microwave Moisture Analyzer
Measurement of Samples of High Moisture Content
Datasheet
Data Sheet
User Manuals
Start up Guide

Show me

Download
(1.70 MB)
User Manual - PMV PLUS Moisture Analyzer

Show me

Download
(2.57 MB)
Conformity Declarations
Conformity Declaration

Show me

Download
(0.04 MB)
Publications and Brochures
Practical aspects of moisture analysis

Show me

Download
(0.54 MB)
Water vapour permeability though

Show me

Download
(0.20 MB)
Determination of food products’ water content performed using MA.X2 and PMV moisture analyzers

Show me

Download
(1.54 MB)
Determination of dry mass of wastewater sludge

Show me

Download
(20.70 MB)
Stainless Steel in RADWAG products. Standard and special applications

Show me

Download
(2.44 MB)
Defined Weighing Profiles

Show me

Download
(1.36 MB)
PMV 50 PLUS - Analysis of Dry Mass Content of Waste Water Sludge

Show me

Download
(0.19 MB)
PMV 50 Moisture Analyzer

Show me

Download
(0.88 MB)
Accuracy and Precision of Water Content Determination

Show me

Download
(0.82 MB)
Moisture Analyzers

Show me

Download
(9.14 MB)
Moisture analysres and moisture content measurement

Show me

Download
(4.46 MB)