Multifunktionswaage HY10.300.C2.K

Deutsch English Español Français Italiano Polski Türkiye Česky USA 中文

Multifunktionswaage HY10.300.C2.K

Home > Produkte > Industriewaagen > 1-Sensor Plattformwaagen > HY10 Series > Multifunktionswaage HY10.300.C2.K

This image is for reference only.

Produktcode: WP-116-0008

Select model (15)

done

Multifunktionswaage HY10.300.C2.K

Max: 300kgd: 100g

⤢

400×500mm

expand_more

Multifunktionswaage HY10.1,5.F1.K

Max: 1,5kgd: 0,5g

⤢

300×300mm

Multifunktionswaage HY10.3.F1.K

Max: 3kgd: 1g

⤢

300×300mm

Multifunktionswaage HY10.6.F1.K

Max: 6kgd: 2g

⤢

300×300mm

Multifunktionswaage HY10.15.C3.K

Max: 15kgd: 5g

⤢

500×700mm

Multifunktionswaage HY10.15.F1.K

Max: 15kgd: 5g

⤢

300×300mm

Multifunktionswaage HY10.15.C2.K

Max: 15kgd: 5g

⤢

400×500mm

Multifunktionswaage HY10.30.F1.K

Max: 30kgd: 10g

⤢

300×300mm

Multifunktionswaage HY10.30.C3.K

Max: 30kgd: 10g

⤢

500×700mm

Multifunktionswaage HY10.30.C2.K

Max: 30kgd: 10g

⤢

400×500mm

Multifunktionswaage HY10.60.C3.K

Max: 60kgd: 20g

⤢

500×700mm

Multifunktionswaage HY10.60.C2.K

Max: 60kgd: 20g

⤢

400×500mm

Multifunktionswaage HY10.150.C2.K

Max: 150kgd: 50g

⤢

400×500mm

Multifunktionswaage HY10.150.C3.K

Max: 150kgd: 50g

⤢

500×700mm

Multifunktionswaage HY10.300.C3.K

Max: 300kgd: 100g

⤢

500×700mm

Beschreibung

Wägebereich [Max]: 300kg
Ziffernschritt [d]: 100g

Select model:

✓ Multifunktionswaage HY10.1,5.F1.K

✓ Multifunktionswaage HY10.3.F1.K

✓ Multifunktionswaage HY10.6.F1.K

✓ Multifunktionswaage HY10.15.C3.K

✓ Multifunktionswaage HY10.15.F1.K

✓ Multifunktionswaage HY10.15.C2.K

✓ Multifunktionswaage HY10.30.F1.K

✓ Multifunktionswaage HY10.30.C3.K

✓ Multifunktionswaage HY10.30.C2.K

✓ Multifunktionswaage HY10.60.C3.K

✓ Multifunktionswaage HY10.60.C2.K

✓ Multifunktionswaage HY10.150.C2.K

✓ Multifunktionswaage HY10.150.C3.K

✓ Multifunktionswaage HY10.300.C2.K

✓ Multifunktionswaage HY10.300.C3.K

Select all

Mehr sehen

Download

Angebot anfordern

Beschreibung

Die Multifunktionswaage HY10 ist für schnelle und genaue Messungen in industriellen Bedingungen bestimmt. Die Waage HY10 besteht aus dem Messgerät PUE HY10 im Edelstahl-Gehäuse und der Wägeplattform (1 Wägezelle) aus lackiertem Stahl.

Die Waage basiert auf der pulverbeschichteten Konstruktion aus Stahl mit der Waagschale aus Edelstahl und auf dem Messgerät mit Display 10,1” mit dem Touchscreen und der Berührungstastatur mit getrennten Ziffern- und Funktionstasten. Das Gerät kann mit zusätzlichen Wägeplattformen kooperieren.

Die Multifunktionswaage HY10 wird in der Version mit dem Messgerät angeboten, das mit Hilfe des Kabel mit der Wägeplattform verbunden ist.

Es ist möglich, Zweibereichswaage gegen zusätzliche Gebühr auszuführen.

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Technische Daten

Wägebereich [Max]	300 kg
Min. Belastung	2 kg
Ziffernschritt [d]	100 g
Tarierbereich	-300 kg
Eichwert [e]	100 g
Max Ablesbarkeit [d] bei nicht geeichter Waage	10 g
Justierung	extern
OIML-Klasse	III
Display	10,1” grafisch farbiger touchscreen
Waagschale	400×500 mm
Verpackungsgröße	720×580×220 mm
Nettogewicht	16 kg
Bruttogewicht	18 kg
Schutzart	IP 65 Konstruktion, IP 68 (1h max)/69 Messgerät
Schnittstelle	2×RS232, 2×USB, Ethernet, 4 IN / 4 OUT (digital)
Modul Wi-Fi^® (optional)	802.11 b/g/n
Modul RS485 (optional)	1
Modul Profibus (optional)	DP SLAVE
Modul PROFINET (optional)	1 × RJ45
Modul analoge Ausgänge (optional)	4-20mA, 0-20mA, 0-10V
Eingänge/Ausgänge (optional)	12IN / 12OUT (IN – 5-24 VDC, OUT – max 30 VDC, 0,5 ADC)
Stromversorgung	100 — 240 V AC 50 / 60 Hz
Umgebungstemperatur	-10 — +40 °C
Relative Luftfeuchtigkeit	10% — 85% RH ohne Kondensation

Videos

RADWAG Remote Desktop - Windows 10

RADWAG Remote Desktop

Funktionen

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

Replaceable unit

Replaceable units.

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Transactions

Complex weighing mode for registration of weighings that are part of transactions such as sale, purchase and warehouse transfer. You can create a new transaction using the scale. It is possible to pause the transaction or abort it. The function supports warehouse management in an enterprise.

Dokumentation

Produktkarten

Data Sheet

This product:

Mehr sehen

Download

For the group:

Mehr sehen

Download

Bedienungsanleitungen

Software Manual - CBCP 03

Mehr sehen

Download

(0.23 MB)

User Manual - PUE HY10

Mehr sehen

Download

(2.19 MB)

Start up Guide

Mehr sehen

Download

(1.38 MB)

User Manual - HY10 multifunctional scales

Mehr sehen

Download

(1.88 MB)

Software Manual - PUE HY10

Mehr sehen

Download

(7.10 MB)

Software Manual - Radwag-Mass -Node-RED

Mehr sehen

Download

(0.57 MB)

Software Manual - PROFIBUS communication protocol of PUE HY10

Mehr sehen

Download

(0.65 MB)

Software Manual - MODBUS RTU communication protocol of PUE 7.1 / PUE HY10

Mehr sehen

Download

(0.74 MB)

Software Manual - Appendices 01

Mehr sehen

Download

(1.81 MB)

User Manual - Connecting External Platform

Mehr sehen

Download

(0.99 MB)

Software Manual - PROFINET communication protocol of PUE HY10

Mehr sehen

Download

(1.82 MB)

Konformitätserklärungen

Conformity Declaration

Mehr sehen

Download

(0.04 MB)

Publikationen und Broschüren

THBR System 2.0

Mehr sehen

Download

(5.17 MB)

Stainless Steel in RADWAG products. Standard and special applications

Mehr sehen

Download

(2.44 MB)

Terminals and Platforms

Mehr sehen

Download

(3.72 MB)

Zubehör

Zylinder, Set (1 mg - 50 g), Kunststoffverpackungen

Zubehör

Audit Trail Reader

Zubehör

E2R Weighing

E2R Rezepturen

E2R PGC

E2R Evidenz

Zubehör

Etiketten-Editor R02

Zubehör

Editor von Waagen 2.0

Zubehör

R-Barcode

Zubehör

RLAB

Zubehör

RAD Key

Zubehör

Radwag Connect

Zubehör

RADWAG Development Studio

Zubehör

Radwag Remote Desktop

Zubehör

Labview Radwag Driver

Zubehör

Nadeldrucker Epson TM-U220A

Nadeldrucker Epson TM-U220B

Epson TM-T20III (USB + SERIAL)

Epson TM-T20III (USB + ETHERNET)

Zubehör

Thermischer Drucker Zebra ZT 220

Thermischer Drucker Zebra GX 420t

Thermischer Drucker Zebra GX 430t

Thermischer Drucker Zebra GX 420d

Thermischer Drucker Zebra GK 420t

Thermischer Drucker Zebra ZT 411

Thermischer Drucker Zebra GK 420d

Zubehör

Moxa UPort 1110 Converter

Zubehör

Kabel PT0022

Zubehör

Kabel PT0256

Zubehör

Kabel PT0019

Zubehör

Kabel PT0020

Zubehör

Kabel PT0087

Zubehör

Kabel PT0212

Zubehör

Externe Tara und Print Taster

Zubehör

Barcode-Scanner PD9330-AR

Barcode-Scanner PM9300-D

Barcodescanner LS2208

Barcodescanner PowerScan D8330

Barcode-Scanner DS2208

Barcode-Scanner PD9330

Barcode-Scanner PM9300

Barcode-Scanner PM9300-DK

Zubehör

Grossformatdisplay WWG-2/4

LCD-Display WD-4/3

Zusätzliche Module

Audit Trail3

Die Multifunktionswaage HY10 ist für schnelle und genaue Messungen in industriellen Bedingungen bestimmt. Die Waage HY10 besteht aus dem Messgerät PUE HY10 im Edelstahl-Gehäuse und der Wägeplattform (1 Wägezelle) aus lackiertem Stahl. Die Waage basiert auf der pulverbeschichteten Konstruktion aus Stahl mit der Waagschale aus Edelstahl und auf dem Messgerät mit Display 10,1” mit dem Touchscreen und der Berührungstastatur mit getrennten Ziffern- und Funktionstasten. Das Gerät kann mit zusätzlichen Wägeplattformen kooperieren. Die Multifunktionswaage HY10 wird in der Version mit dem Messgerät angeboten, das mit Hilfe des Kabel mit der Wägeplattform verbunden ist. Es ist möglich, Zweibereichswaage gegen zusätzliche Gebühr auszuführen. Stainless Steel in RADWAG products Learn about the use and maintenance of stainless steel products: Stainless Steel in RADWAG products. Standard and special applications

Wägebereich [Max]	300 kg
Min. Belastung	2 kg
Ziffernschritt [d]	100 g
Tarierbereich	-300 kg
Eichwert [e]	100 g
Max Ablesbarkeit [d] bei nicht geeichter Waage	10 g
Justierung	extern
OIML-Klasse	III
Display	10,1” grafisch farbiger touchscreen
Waagschale	400×500 mm
Verpackungsgröße	720×580×220 mm
Nettogewicht	16 kg
Bruttogewicht	18 kg
Schutzart	IP 65 Konstruktion, IP 68 (1h max)/69 Messgerät
Schnittstelle	2×RS232, 2×USB, Ethernet, 4 IN / 4 OUT (digital)
Modul Wi-Fi^® (optional)	802.11 b/g/n
Modul RS485 (optional)	1
Modul Profibus (optional)	DP SLAVE
Modul PROFINET (optional)	1 × RJ45
Modul analoge Ausgänge (optional)	4-20mA, 0-20mA, 0-10V
Eingänge/Ausgänge (optional)	12IN / 12OUT (IN – 5-24 VDC, OUT – max 30 VDC, 0,5 ADC)
Stromversorgung	100 — 240 V AC 50 / 60 Hz
Umgebungstemperatur	-10 — +40 °C
Relative Luftfeuchtigkeit	10% — 85% RH ohne Kondensation