Balance aérienne H315.2K.300/600H

✆

Deutsch English Español Français Italiano Polski Türkiye Česky USA

Le Site Principal > Produits > Trieuses pondérales > Balances aériennes > Balance aérienne H315.2K.300/600H

This image is for reference only.

Balance aérienne H315.2K.300/600H

Code produit: WP-238-1002

Change the model (2)

done

Max: 300 / 600kgd: 0,1 / 0,2kg

expand_more

Balance aérienne H315.2K.300/600

Max: 300 / 600kgd: 0,1 / 0,2kg

Capacité maximale [Max]: 300 / 600 kg
Précision de lecture: 0,1 / 0,2 kg

Change the model:

✓ Balance aérienne H315.2K.300/600

✓ Balance aérienne H315.2K.300/600H

Select all

Voir

Download

Acheter maintenant (FR)Je veux en savoir plus

Pour Comparer Recherche avancée

Description

La balance aérienne est conçue pour le pesage de demi-carcasses avec un train de roulement suspendu. Le pesage se déroule après être entré avec un rouleau avec une demi-carasse suspendue dans la section de mesure de balance. Jauges de contrainte de mesure sont installés le long de mesure fixé sur les tiges rondes (manque de contraintes de construction).

Balance aérienne est construite en acier inoxydable. Elle est équipée de terminal de balance dans le boîtier inoxydable PUE H315 avec un afficheur LCD.

Le montage de balance aérienne est réalisé par le service de maintenance de RADWAG pour un paiement supplémentaire.

Acier inoxydable in RADWAG products
Learn about the use and maintenance of stainless steel products:
Acier inoxydable dans les balances RADWAG

Paramètres Techniques

Capacité maximale [Max]	300 / 600 kg
Capacité minimale [Min]	2 kg
Précision de lecture	0,1 / 0,2 kg
Étendue de tare	-600 kg
Classe de précision OIML	III
Afficheur	LCD (rétro-éclairé)
Longueur de trajectoire de mesure	L= 800 mm (min. 200 mm)
Degré de protection	IP 67 construction, IP 68 (1h max)/69 terminal
Construction	Acier inoxydable AISI304
Interface de Communication	RS232, USB
Interfaces optionnelles	RS232 ou RS485 ou 4IN/4OUT ou Ethernet ou entrées analogique 4-20 mA
Alimentation	100 – 240 V AC 50/60 Hz
Alimentation optionnelle	accumulateur interne
Temps de travail avec l'alimentation d'accumulateur	max 7h
Température du travail	-10 – +40 °C
Humidité relative d'air	10% – 85% RH sans condensation

Extra payment
for verification

Fonctions

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Documentation

Cartes de produits

Data Sheet

Voir

Download

Choose more product:
Voir

Voir

Download

Modes d'emploi

User Manual - CBCP 01

Voir

Download

(0.30 MB)