Pour Comparer : Balance étanche à 1 détecteur WPT 15/H3

Radwag Balances and Scales - Advanced Weighing Technologies
NouveautésNouveautés FilmsFilms CataloguesCatalogues
Selected language Français
Le Site Principal > Produits > Balances industrielles > Balances mono capteur > Balances étanches de rampe WPT H > Balance étanche à 1 détecteur WPT 15/H3

Balance étanche à 1 détecteur WPT 15/H3

Balance étanche à 1 détecteur WPT 15/H3 en Balances industrielles
This image is for reference only.

Code produit: WP-105-0004
Poser des questions sur le produit

Description

Capacité maximale [Max]: 15kg
Précision de lecture: 5g

La

balance

de rampe étanche est conçue pour le travail dans les conditions d’une grande humidité ou pendant un contact direct avec l’eau.

Elle est équipée du terminal de

balance

PUE C/31H avec un afficheur LCD rétroéclairé. Toute la construction est faite en acier inoxydable OH18N9. La balance est alimentée de réseau 100-240 V AC. La balance est équipée de l’interface RS 232.
 
Il existe la possibilité de faire la balance de deux étendues pour un paiement supplémentaire.

Il existe la possibilité de construire la balance à deux étendues pour un paiement supplémentaire.
                                                               
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Acier inoxydable dans les balances RADWAG

Fonctions

Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Internal battery

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Paramètres Techniques

Capacité maximale [Max]

15

 kg

Capacité minimale [Min]

100

 g

Précision de lecture

5

 g

Étendue de tare

-15

 kg

Classe de précision OIML

III

 

Afficheur

LCD (rétro-éclairé)

 

Degré de protection

IP 67 construction, IP 68 (1h max)/69 terminal

 

Communication interface

RS232

 

Alimentation

100 ÷ 240 V AC 50 / 60 Hz + accumulateur

 

Temps de travail avec l'alimentation d'accumulateur

45 heures (temps moyen)

 

Température du travail

-10 ÷ +40

 °C

Humidité relative d'air

10% ÷ 85% RH sans condensation

 

Dimension du plateau

410×410

 mm

Dimensions de colis

670×510×330

 mm

Masse nette

15,5

 kg

Masse brute

17,3

 kg

Documentation

Documentation technique
Publications et Matériaux Pédagogiques
Mode d'emploi - WPT
(2.01 MB)
Save See the publication
Data Sheet
(1.04 MB) EN
Save See the publication
Conformity Declaration
(0.03 MB) EN
Save See the publication
Acier inoxydable dans les balances RADWAG
(2.46 MB)
Save See the publication
Measuring_instruments_in_industry
(0.05 MB) EN
Save See the publication
Terminaux de Pesage et Balances Industrielles
(5.14 MB)
Save See the publication

Accessoires

Tables antivibratoires en granite
Plateaux avec les convoyeurs à rouleaux
Éditeur de Balances
R-LAB
RAD KEY
Pilote LabVIEW
Imprimante de tickets de caisse
Moxa UPort 1110 Converter

Accessoires

Nom De Produit

Description

Moxa UPort 1110 Converter

...
Convertisseur RS232 – Ethernet
Sorties de boucle de courant AP2-3
Câbles RS 232 (balance – imprimante EPSON)
Câbles RS 232, RS 485
Câbles d'alimentation de cigare-allume
Afficheurs
Offre
Produits
Nouveautés
Services
Étalonnage des balances
électroniques
Étalonnage des étalons
Étalonnage des pipettes
à piston
Validation des balances et
des systèmes des balances
Soutien
User manuals
Téléchargement
des fichiers
Services
Aide à distance
Publications
Évaluation de la satisfaction
Fill out the RMA service request
Webinars
Radwag
Entreprise
Histoire
Système de la qualité ISO
Certificats des produits
Prix et certificats
Foires et conférences
Contact
Privacy policy
Radwag Balances Électroniques
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2021 RADWAG Balances Électroniques. Tous les droits sont réservés.

Wybierz język

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Subscribe
Facebook
Youtube
Vimeo
LinkedIn
Webinars
close