Báscula impermeable H315.60.HR3.M

Las balanzas hidrorresistentes H315/HR se dedican al funcionamiento en condiciones de alta humedad o en el contacto directo con agua. Pueden ser también empleadas en lugares sin acceso a la red eléctrica por ya que puede equiparse opcionalmente con una batería interna recargable.

Construcción

La balanza hidrorresistente de 1 sensor H315/HR se construye a base del terminal PUE H315. Una gran y retroiluminada pantalla LCD (6 cifras) instalada en el estante garantiza muy alta legibilidad de resultados. La balanza cuenta con el teclado de 5 botones que facilita muy fácil manejo. Opcionalmente se instala el terminal conectado por el cable de 2,5 m (con la posibilidad de colgar en la pared).

Construcción de la plataforma de pesaje acabada en acero inoxidable AISI 316 con la celda de carga inoxidable de índice de protección IP 68.

La balanza en su versión estándar cuenta con el empalme RS 232 y opcionalmente puede estar equipada con el empalme de la pantalla adicional. Alimentación de red (230VAC 50Hz) y de acumuladores (SLA 6V/3,4Ah).

Opcionalmente se puede acomodarla al sistema 110 — 120VAC 60Hz (construcción especial).

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Datos tecnicos

Maxima capacidad [Max]	60 kg
Minima capacidad	400 g
Legibilidad [d]	20 g
División de legalización [e]	20 g
Rango de tara	-60 kg
Legibilidad máxima para las balanzas no verificadas	2 g
Clase OIML	III
Pantalla	LCD (con retroiluminación)
Dimensión de platillo	410x410 mm
Dimensiones de embalaje	510×510×270 mm
Masa neta	15,5 kg
Masa bruta	17,3 kg
Grado de protección	IP 68 construcción, IP 68 extensómetro, IP 68 (1h max)/69 medidor
Construcción	Acero inoxidable AISI316
Conectividad	RS232, USB
Interfaces opcionales	RS232 o RS485 o 4IN/4OUT o Ethernet o entradas analógica 4-20 mA
Alimentacion	100 – 240 V AC 50/60 Hz
Corriente de alimentación adicional	batería interna
Horas de trabajo con baterias	max 7h
Temperatura de trabajo	-10 – +40 °C
Temperatura de almacenamiento	-25 – +70 °C
Humedad relativa de aire	10% – 85% RH sin condensación

Additional fee
for verification

Vídeos

PUE H315 – Robust Weighing Terminal For the Toughest Industrial Applications

Complete Solutions for Mass Measurement in Pharma Industry

Funciones

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Documentación

Tarjetas de productos

Data Sheet