Balanzas impermeables de 1 sensor WPT 6/HR2/K

Balanzas impermeables de 1 sensor WPT 6/HR2/K - RADWAG Balanzas Electrónicas
This image is for reference only.

Código de producto: WP-105-0044
Preguntar sobre producto


Maxima capacidad: 6kg
Legibilidad [d]: 2g


Waterproof platform


WPT/HR series is designed for operation in locations with high humidity or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator.

Single load cell stainless steel platform scales WPT HR series is based on an


PUE C/31H series. The indicator features large backlit LCD display and function buttons for easy operation. The indicator is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall.


platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68
. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110÷120VAC 60Hz (non-standard factory option).

Scales WPT/HR series is available in dual range (non-verified) version on surcharge.


Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.


Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Internal battery

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Newton unit measurement

Newton unit measurement

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Datos tecnicos

Maxima capacidad 6 kg
Minima cacacidad 40 g
Legibilidad [d] 2 g
Rango de tara -6 kg
División de legalización 2 g
Dimensión de platillo 250x300 mm
Alimentacion 100 ÷ 240 V AC 50 ÷ 60 Hz / 12 V DC + bateria 
Pantalla LCD (con retroiluminación) 
Communication interface RS 232 
Dimensiones de embalaje 580×320×360 mm
Control de protección IP 68 construcción, IP 68 extensómetro,IP 68 (1h max)/69 medidor 
Horas de trabajo con baterias 45 horas (el tiempo promedio) 
Humedad relativa de aire 10÷85% RH sin condensación 
Masa neto /bruto 9 / 10,3 kg
Construcción Stal acero inoxidable AISI 316 
Temperatura de trabajo -10 ÷ +40 °C
Temperatura de almacenamiento -25 - +70 °C


Documentaciones técnicas

Manual de instrucciones
(1.89 MB) ES

See the publication

Folleto de producto
(0.83 MB) ES

See the publication

Declaración de conformidad
(0.04 MB) ES

See the publication



R-Lab (149.39 MB)
Descargar la versión del software con un límite de 1.000 pesajes


Mesas antivibratil de granito
Soportes con transportadores con rollos
Editor de Balanzas
Controlador LabVIEW “Radwag Balances & Scales”
Impresoras de recibos
Salidas del bucle de corriente AP2-3
Cables RS 232 (Bascula a Impresora EPSON)
Cables RS 232, RS 485
Cables de corriente desde mechero de automóvil
Cables RS 232 (terminale a terminale)
Soportes, brazos
Convertidor RS232 a Ethernet

RADWAG Balanzas Electrónicas

Torunska 5
26-600 Radom
tel.: +48 48 386 63 03
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag Google Plus Radwag
© 2019 RADWAG Balances and Scales. All rights reserved.

See our movies