The terminals are intended to designing scales with maximum resolution of 6000 e. PUE 5 series, similarly to the basic model, are enclosed in a stainless steel housing which allows for reaching the highest IP rating, i.e. IP68.
The terminals come standard with interfaces: 2 × RS232, 1 × RS485, 1 × Ethernet, 4 × USB 2.0.
PUE 5 series can be extended by additional 3 weighing modules for simultaneous operation of maximum 4 weighing platforms.
Optionally available PROFIBUS DP interface enables terminals cooperation with industrial ProfiBus network.
The terminal PUE 5 series is a multifunctional weighing device. It combines the best features of a PC computer and a scale. The PUE 5 operates on basis of OS Windows, creating the best option for configuring the device to individual customer requirements through installing corresponding application.
If applied with dosing or formula making systems, the PUE 5 allows for operation with multiple weighing platforms, and simultaneous dosing with full process control. A dosing or formula making system that is configured on basis of the terminal PUE 5 series does not require an additional PC computer. Database editing is possible from the level of PUE 5 touch screen display or an optional PC keyboard.
Area of Use:
Main applications for terminal PUE 5 series:
Designing industrial load cell scales
Multiple weighing applications supervised by a computer system through Ethernet module
Possibility of connecting large quantity of additional weighing platforms to industrial terminals.
PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material).
|Maximum quantity of verification units
19” graphic colour touchscreen
4×USB 2.0 (2×USB-A, 2×M12 4P)
2×10/100/1000 Mbit (2×RJ45 hermetic)
|Profibus DP Interface
operation mode: slave
2×RS232, RS485 (2×M12 8P)
4IN / 4OUT (2×ports M12 8P or 2×cables fed through the cable gland)
|Additional weighing platform module
additional max. 3 pcs (metrological parameters as in the main weighing platform)
|External buttons PRINT, TARA, START (option)
terminal with 4IN/4OUT (M12 8P connector) is required
100 ÷ 240 V AC 50 / 60 Hz
|Power consumption max.
|Maximum quantity of divisions from converter
838 860 ×10
|Maximum increase of signal
|Minimum volatge per verification unit
|Maximum voltage per verification unit
|Minimum load cell impedance
|Maximum load cell impedance
|Load cell excitation voltage
|Connection of load cells
4 or 6 wires + shield
0 ÷ +40
10% ÷ 85% RH no condensation
Microsoft Windows 7 Embedded
Intel® Pentium® N3710 on-board SoC (2.56GHz, quad-core, 2MB cache)
Intel® HD Graphics Gen 7
4GB 1066/1333 MHz DDR3L max 8 GB
SSD 128 GB