AK-4/100 Automatic Mass Comparators in Mass Comparators

Overview

Application:
Automatic mass comparator AK-4/100 series is intended to automatic determination of weights mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/100 is designed to compare weights from 10 g to 100 g. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F.

Design and functionality:
The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Datasheet

E1	10 g — 100 g
E2	10 g — 100 g
F1	10 g — 100 g
F2	10 g — 100 g
Maximum capacity [Max]	110 g
Readability [d]	0.001 mg
Eccentricity (tested load)	0 mg
Electric compensation range	-1 g — +10 g
Stabilization time	30 s
Adjustment	external
Standard repeatability [5% Max]	1.5 µg
Standard repeatability [Max]	2 µg
Permissible repeatability	3.5 µg
Supplementary weights internal	half automatic
Supplementary weights external	-
Magazine positions	4
Weighing pan dimensions	ø24 mm
Weighing device dimensions	385×215×600 mm
Controling device dimensions	206×140×70 mm
Anti-draft chamber dimensions	560×340×665 mm
Packaging dimensions	860×800×560 mm
Chamber packaging size	950×420×630 mm
Net weight	45.8 kg
Gross weight	65.8 kg
Power supply	100 — 240 V AC 50 / 60 Hz
Operating temperature	+15 — +30 °C
Operating temperature change rate	±0.5°C/12h (±0.3°C/4h)
Relative humidity	40% — 60%
Relative humidity change rate	±5%/12h (3%/4h)

Repeatability is expressed as a standard deviation determined for 6 ABBA cycles. Standard deviation is experimentally determined under ambient conditions for calibration of E1 class mass standards specified in OIML R111 (Table C.1.) document.

Videos

RMCS - Radwag Mass Comparator System

Automatic Mass Comparator of AK-4 Series

RADWAG Mass comparators

Documentation

Datasheet