Wägeterminal PUE 7.1 in Messgeräte und Terminals - Radwag Elektronische Waagen

Wägeterminal PUE 7.1

Radwag Balances and Scales - Advanced Weighing Technologies
Selected language Deutsch
Wägeterminal PUE 7.1 in Messgeräte und Terminals
This image is for reference only.
Wägeterminal PUE 7.1
Produktcode: WX-008-0025
Select model (2)
Das Wägeterminal PUE 7.1 ist zum Herstellen von industriellen, tensometrischen Waagen bestimmt. Das Terminal ist mit einem 5,7" TFT-Display mit Touchscreen und einer Folientastatur... mehr ››
Select model:
Wägeterminal PUE 7.1
Wägeterminal PUE 7.1P (panel)
Select all
Mehr sehen
Angebot anfordern
Das Wägeterminal PUE 7.1 ist zum Herstellen von industriellen, tensometrischen Waagen bestimmt. Das Terminal ist mit einem 5,7" TFT-Display mit Touchscreen und einer Folientastatur ausgestattet.
Das Gerät ist mit zwei Bewegungssensoren ausgestattet, die im Menü programmierbar sind.
An das Messgerät können maximal 2 Wägeplattformen, Barcodescanner, Drucker und Etikettendrucker, RFID-Leser und PC-Peripherien (Maus, Tastatur, USB-Datenträger) angeschlossen werden. Das PUE 7.1-Terminal in der Standardausführung arbeitet mit 1 Wägeplattform und verfügt über eine umfangreiche Kommunikationsschnittstelle: 2×USB, 2×RS-232, Ethernet, 4 Eingänge/ 4 Ausgänge (digital), Wi-Fi®.

Das PUE 7.1-Terminal kann um 1 weitere Plattform durch die Erweiterung mit einem zusätzlichen Plattformmodul  DP-6 ausgebaut werden.

Bemerkung: in der Version mit zwei Wägeplattformen arbeitet das Messgerät nur mit Kabelverbindung (die /R-Version ist nicht verfügbar).

Wi-Fi® ist eine eingetragene Marke der Wi-Fi Alliance®.
Technische Daten
Max. Anzahl der Eichwerte

6000 e





Max. Signalzunahme

19,5 mV


Min. Spannung auf Eichwert

0,4 µV


Max. Spannung auf Eichwert

3,25 µV


Min. Impedanz der DMS-Zellen

50 Ω


Max. Impedanz der DMS-Zellen

1200 Ω


Versorgungsspannung DMS-Zelle




5,7” resistiv farbiger touchscreen


Abmessungen Gerät













IP 43


Anzahl von Tasten




16 GB (micro SD)



2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®


AD-Wandler: DP6

1 (optional)


Maximaler Leistungsaufnahme

max. 1 A



-10 — +40


Relative Luftfeuchtigkeit

10% — 85% RH ohne Kondensation



panel touchscreen



ABS Kunststoff






quad-core 64-bit Cortex-A53 1,2 GHz






16 GB (micro SD)


Max. Anzahl der Plattformen





  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n


Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.


Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.


Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.


Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.


Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.


Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Data Sheet

This product:

Mehr sehen


For the group:
Mehr sehen Download
Software Manual - CBCP 03

Mehr sehen

(0.23 MB)
Start up Guide

Mehr sehen

(1.69 MB)
Software Manual - MODBUS RTU communication protocol of PUE 7.1 / PUE HY10

Mehr sehen

(0.74 MB)
Software Manual - Appendices 01

Mehr sehen

(1.81 MB)
Bedienungsanleitungen - PUE 7.1

Mehr sehen

(4.24 MB)
Software Manual - PUE 7.1

Mehr sehen

(6.55 MB)
Conformity Declaration

Mehr sehen

(0.04 MB)
Publikationen und Broschüren
Wageterminal PUE 7.1

Mehr sehen

(0.32 MB)
Terminals and Platforms

Mehr sehen

(3.72 MB)
Kompatibel mit
HRP.H Edelstahl Wägeplattformen
HRP pulverbeschichtete Wägeplattformen
Wasserdichte Plattformen aus Stahl
1-Sensor Plattformen Stahl lackiert
1-Sensor Plattformen im Kunststoffgehäuse
4-Sensor Auffahrplattformen rostfrei
Auffahrplattformen rostfrei mit LD System zum Anheben
4-Sensor Plattformen rostfrei mit aufklappbarer Waagschale
Wasserdichte 4-Sensor Plattformen aus Stahl
4-Sensor Plattformen Stahl lackiert
Audit Trail Reader

Kompatibel mit

E2R System
Etiketten Editor R02

Kompatibel mit

Waagen-Editor 2.0

Kompatibel mit


Kompatibel mit


Kompatibel mit

RADWAG Connect

Kompatibel mit

RADWAG Development Studio
RADWAG Remote Desktop
LabVIEW Driver
Thermische Drucker

Kompatibel mit

Konverter RS 232 – USB
Ausgang der Stromschnittstelle AP2-1
E/A Kabel

Kompatibel mit

Anschlusskabel für Zigarettenanzünder

Kompatibel mit

Kabel RS 232RS 485
Kabel RS 232 (Waage – Drucker EPSON)

Kompatibel mit

Tastaturen, Taster
Stative, Ausleger
RADWAG Elektronische Waagen
Torunska 5
26-600 Radom
Tel.: +48 48 386 60 00
E-mail: export@radwag.com
VAT Nr.: 796-000-03-27
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2021 RADWAG Elektronische Waagen. Alle Rechte vorbehalten.

Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Change website to USA USA
Change language page on 中文 中文