RMC 2.5Y.FC Robotic Weighing System

Radwag Terazileri İleri Tartım Teknolojileri
Selected language Türkiye
RMC 2.5Y.FC Robotic Weighing System
This image is for reference only.

RMC 2.5Y.FC Robotic Weighing System

Ürün kodu: WL-504-0004
Change the model (2)
doneexpand_more
Maksimum yük [Max]: 2,1 g
Okuma doğruluğu [d]: 1 µg

close
Change the model:
RMC 2.5Y.F Robotic Weighing System
RMC 2.5Y.FC Robotic Weighing System
Select all
Bakış
İndirme
Karşılaştırmak için ürün ekleyin Advanced Search
Genel Açıklama

Teknik Veriler
Maksimum yük [Max]

2,1

 g

Okuma up toğruluğu [d]

1

 µg

Yasallaştırma birimi [e]

1

 mg

Dara aralığı

-2,1

 g

Tekrarlanabilirlik (Max)

1 - 2

 µg

Düşük yükte tekrarlanabilirlik

0,5

 µg

Doğrusallık

≤ 1,5

 µg

Kararlılık süresi

10 - 20

 s

Ayarlama

internal

 

OIML sınıfı

I

 

Display

10″ graphic colour touchscreen

 

Cihaz boyutları

2108×1404×1878

 mm

Net ağırlık

700

 kg

Brüt ağırlık

775

 kg

Temassız çalışma

2 IR Sensors

 

Haberleşme arayüzü

2×USB-A, USB-C, HDMI, Ethernet, Wi-Fi®, Hotspot

 

Güç kaynağı

110 – 240 V AC 50/60 Hz

 

Çalıştırma sıcaklığı

+10 — +40

 °C

Depolama sıcaklığı

-20 — +50

 °C

Çalışma sıcaklığı değişim hızı

±0,3°C/1h (±1°C/8h)

 

Atmosferik nem

30% — 70%

 

Atmosferik nem değişim hızı

±1%/h (±4%/8h)

 

Klavye

8 przycisków

 

2 yıl garanti
Doğrulama Extra payment
for verification
CE
Videolar
ELLIPSIS – New Balance by RADWAG
ELLIPSIS – Cutting Edge, Innovative, New
Talk to it. Voice Commands in New ELLIPSIS Balance by RADWAG
310 ELLIPSIS – Scan or Tap to Log In
Remote VPN Support on ELLIPSIS Balances
ELLIPSIS – Unlimited Connections
Fully automated process of robotic comparison of mass standards thanks to an innovative RADWAG mass comparator
Fonksiyonlar
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Wi-Fi®

Wi-Fi®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Dokümantasyon
Data Sheet Data Sheet
Data Sheet

Bakış
Bakış
İndirme
İndirme

Choose more product:
Bakış Bakış İndirmeİndirme
User Manual
User Manual
Bakış
Bakış
İndirme
İndirme
(2.36 MB)
User Manual
User Manual
Bakış
Bakış
İndirme
İndirme
(1.24 MB)
Software Manual
Software Manual
Bakış
Bakış
İndirme
İndirme
(1.23 MB)
User Manual
User Manual
Bakış
Bakış
İndirme
İndirme
(12.88 MB)
Principles of Metrology
Principles of Metrology
Bakış
Bakış
İndirme
İndirme
(0.10 MB)
Guidelines for a weighing room for correct microbalance and mass comparator operation
Guidelines for a weighing room for correct microbalance and mass comparator operation
Bakış
Bakış
İndirme
İndirme
(0.82 MB)
Detection of vibrations at the electronic balances workstation
Detection of vibrations at the electronic balances workstation
Bakış
Bakış
İndirme
İndirme
(2.02 MB)
THBR System 2.0
THBR System 2.0
Bakış
Bakış
İndirme
İndirme
(5.17 MB)
Lexicon of Basic Metrological Terms
Lexicon of Basic Metrological Terms
Bakış
Bakış
İndirme
İndirme
(6.31 MB)
RFID
RFID
Bakış
Bakış
İndirme
İndirme
(0.68 MB)
Hybrid Protective Glass
Hybrid Protective Glass
Bakış
Bakış
İndirme
İndirme
(1.86 MB)
Micro Scale Measurement
Micro Scale Measurement
Bakış
Bakış
İndirme
İndirme
(2.74 MB)
Gravimetric Methods
Gravimetric Methods
Bakış
Bakış
İndirme
İndirme
(7.37 MB)
Microbalances working conditions
Microbalances working conditions
Bakış
Bakış
İndirme
İndirme
(2.25 MB)
Aksesuarlar
Ek modüller
21 CFR Bölüm 11 Uyum Modülü3
Radwag Terazileri İleri Tartım Teknolojileri
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 RADWAG Balances and Scales. All rights reserved.

Bir dil seçin

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Česky
Change website to USA USA
Change language page on 中文 中文
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
e-posta:
Firma ismi:
İsminiz:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩