Basamento versione „waterproof” con cella di carico in aciaio inox 15kg 5g H315.15.HR3.M

Basamento versione „waterproof” con cella di carico in aciaio inox H315.15.HR3.M

I basamenti in versione „waterproof” serie H315/HR sono stati sviluppati per operare in ambienti ad alto tasso di umidita
o a diretto contatto con l’acqua. Questi strumenti possono essere utilizzati in luoghi privi di accesso alla rete elettrica, in quanto possono essere dotati di una batteria interna ricaricabile.

Progetto

I basamenti a singola cella di carico in acciaio inox serie H315 HR sono basati sull’utilizzo degli terminali PUE H315 series. Il terminale e caratterizzato da un dislay LCD di dimensioni generose e pulsanti funzione per un utilizzo semplice. Il terminale e installato su di un supporto a colonna che rende facilmente visualizzabili li indicazioni mostrate dal display. E’ disponibile l’opzione dell’indicatore connesso via cavo al basamento per permetterne il montaggio a muro.

La struttura del basamento e realizzata in acciaio inox AISI 316 con la cella di carico in acciaio inox e con il massimo grado di protezione; IP 68 / 69.

I basamenti dispongono di interfaccia seriale e, come opzione, di una presa display. I basamenti vengono alimentati con la corrente di rete o utilizzando l’accumulatore interno ricaricabile.

E’ disponibile una versione con alimentazione 110 — 120VAC 60Hz (da specificare in quanto non standard).

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Specifiche

Portata massima [Max]	15 kg
Portata minima [Min]	100 g
Divisione [d]	5 g
Intervallo di verifica della bilancia [e]	5 g
Campo di tara	-15 kg
Massima leggibilità per bilance non verificate	0,5 g
Classe OIML	III
Display	LCD (backlit)
Dimensione piatto	410x410 mm
Dimensioni del pacco	510×510×270 mm
Peso netto	10,26 kg
Peso lordo	17,3 kg
Punteggio IP	IP 66 / 67 / 69 construction, IP 68 / 69 cell, IP 66 / 67 / 69 terminal
Costruzione	Stainless steel AISI316
Interfaccia	RS232, USB
Interfacce opzionali	RS232 or RS485 or 4IN/4OUT or Ethernet or analog output 4-20 mA
Alimentatore	100 – 240 V AC 50/60 Hz
Alimentatore opzionale	internal rechargeable battery
Tempo operativo delle batterie	max 7h
Ambiente di lavoro	-10 – +40 °C
Temperatura di stoccaggio	-25 – +70 °C
Umidità relativa	10% – 85% RH no condensation

Additional fee
for verification

Video

PUE H315 – Robust Weighing Terminal For the Toughest Industrial Applications

Complete Solutions for Mass Measurement in Pharma Industry

Funzioni

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Documentazione

Data Sheet

Vista

Salva

Choose more product:
Vista

Vista

Salva

User Manual - CBCP 01

Vista

Salva

(0.30 MB)

User Manual - PUE H315

Vista