aggiungere a confrontare : Terminale PUE 7.1

Selected language Italiano Italiano
Change language
Change language page on Deutsch DeutschChange language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Polski PolskiChange language page on Türkiye Türkiye ČeskyChange website to USA USAChange language page on 中文 中文

Terminale PUE 7.1

Terminale PUE 7.1 - Il terminale e PUE 7.1 e caratterizzato da uno display touch screen da 5,7”colori con tastiera a membrana
This image is for reference only.

Codice prodotto: WX-008-0025
Richiesta di offerta

caratteristiche generali

Il terminale serie PUE 7.1 e stato progettato per essere una estensione per basamenti industriali. Il terminale e PUE 7.1 e caratterizzato da uno display touch screen da 5,7”colori con tastiera a membrana. I due sensori di prossimita programmabili per eseguire diversi comandi e funzioni danno la possibilita di eseguire le stesse senza contatto diretto con il terminale.
il PUE 7.1 permette la connessione di diverse perificriche inclusi: lettori di codici a barre. Stampanti per etichette e per la stampa di ricette, lettore di tessere transponder ed le periferiche tipiche di un PC (tastiera, mouse etc.). Il terminale puo pilotare un basamento in versione standard.

Caratteristiche

Interfaces
- Ethernet
- 2×USB
- 2×RS 232
- 4 in / 4 out
- WiFi 2,4GHz b,g,n

Interfaces

- Ethernet
- 2×USB
- 2×RS 232
- 4 in / 4 out
- WiFi 2,4GHz b,g,n

funzioni

Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

foglio di calcolo

Quantita massima di unita verificate

6000 e

 

Classe OIML

III

 

display

5,7” resistive colour touchscreen

 

punteggio IP

IP 43

 

Capacita del database

16 GB (micro SD)

 

interfaccia

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

 

Modulo di conversione DP6 A/C addizionale

1 (option)

 

Alimentatore

100 ÷ 240 V AC 50 / 60 Hz

 

Massimo assorbimento elettrico

max. 1 A

 

Incremento massimo del segnale

19,5 mV

 

Minimum volatge per verification unit

0,4 µV

 

Maximum voltage per verification unit

3,25 µV

 

Impedenza della cella al carico minimo

50 Ω

 

Maximum load cell impedance

1200 Ω

 

Tensione di eccitazione della cella di carico

5V DC

 

temperatura di lavoro

-10 ÷ +40

 °C

Umidita atmosferica

10% ÷ 85% RH no condensation

 

Tastiera

panel touchscreen

 

Numero di pulsanti

8

 

Struttura

ABS plastic

 

Sistema operativo

Linux

 

Processore

4×1,2 GHz

 

Memoria

RAM 1 GB

 

Numero massimo di piattaforme

2

 

documentazione

specifiche tecniche
Publications and teaching materials
User Manual
(0.23 MB) EN
Save See the publication
User Manual
Programming Documentation

(0.15 MB) EN
See the publication
User Manual
(3.05 MB) EN
Save See the publication
Data Sheet
(0.18 MB) EN
Save See the publication
Data Sheet
(1.54 MB) EN
Save See the publication
Conformity Declaration
(0.04 MB) EN
Save See the publication
PUE HX7 Terminal
(2.33 MB) EN
Save See the publication
Terminal and Scales Operated in Industry
(4.95 MB) EN
Save See the publication

software

Software

Parameter Editor (124.35 MB)

Database Editor PC Software (88.95 MB)

Compatibile con

Basamenti HRP.H
Basamenti ad alta capacita HRP
Piattaforme di pesatura in acciaio
Piattaforme di pesatura in acciaio dolce verniciato a polvere
Piattaforme con struttura in materiale plastico

Compatibile con

Dimensioni del piatto di pesata
Divisione
Capacita massima  [Max]
Verifica
nome prodotto:

PL3/6/D2

3 / 6 kg

-

195×195 mm

PL1,5/3/D2

1,5 / 3 kg

-

195×195 mm

PL0,6/1,5/D2

0,6 / 1,5 kg

-

195×195 mm

Piattaforme di pesatura in acciaio dolce verniciato a polvere
Piattaforme di pesatura in acciaio
Piattafporme di pesatura in acciaio, versioni con base di carico a compasso
Piattaforma di pesatura in acciaio con rampa di carico
Audit Trail Reader

Accessori

nome prodotto:

caratteristiche generali

Audit Trail Reader

Audit Trail Reader ...

Sistema E2R
Editore di etichette R02
Editore parametri
Codice a barre R
R-LAB
RAD-KEY
RADWAG Connect
Studio di sviluppo RADWAG
RADWAG Remote Desktop
Driver LabVIEW
Stampanti di ricevuta
stampanti per etichette
Cavo di alimentazione con spina per accendisigari
Cavo seriale RS 232, RS 485
Cavo seriale RS 232 (connessione bilance - Stampanti EPSON)
cavi IN/OUT
tastiera, interruttori esterni
lettore di codici a barre
Supporto, set di montaggio a muro e braccetti di montaggio
Display
uscita

Radwag bilance e sistemi di pesatura

Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2019 Radwag bilance e sistemi di pesatura. Diritti riservati

Watch more
RADWAG videos


movie
Radwag WEBINARS