Pour Comparer : Pèse-palette C315.4P 600.C

Deutsch English Español Français Italiano Polski Türkiye Česky USA 中文

Français

‹‹ Produits Nouveautés Sur l’Entreprise

Le Site Principal > Produits > Balances industrielles > Pèse-palettes et Pèse-poutres > Pèse-palettes > Pèse-palette C315.4P 600.C

Pèse-palette C315.4P 600.C

This image is for reference only.

Code produit: WP-230-0020

CE - Il symbolise la conformité d’un produit avec les régularisations de l’Union Européenne. Le marquage CE sur le produit présente la conformité d’un produit avec d’autres règlements de sécurité déterminés par les directives du marquage CE.

Légalisation - La procédure de l’étendue de la métrologie légale, effectuée par l’administration des mesures (Les Bureaux de Mesures Régionaux ) sur la base des études d’un outil de mesure avant son introduction sur le marché. Pour la plupart des outils de mesure (pour les balances aussi) cette procédure n’est pas appliquée. Elle a été substituée par la vérification de la conformité.

Poser des questions sur le produit

Fonctions

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

h3{display:inline color:inherit font-weight:inherit} La pèse-palette stable, en acier pulvérisée, à 4 senseurs est conçue pour le pesage de palettes. On peut placer une charge sur la balance à l’aide d’un chariot à fourche ou un pont roulant. La construction est équipée de roues de mouvement et de poignées, cela facilite à un degré considérable un transport au lieu d'un utilisation. Le terminal de balance PUE C315 avec un afficheur rétroéclairé LCD installé sur le câble. Le câble est protégé par une conduite électrique. 3 mètres est la longueur d’un câble qui connecte le terminal et la plate-forme.

Capacité maximale [Max]	600 kg
Capacité minimale [Min]	4 kg
Précision de lecture	200 g
Étendue de tare	-600 kg
Afficheur	LCD (rétro-éclairé)
Degré de protection	IP 65 construction, IP 67 tensomètre, IP 43 terminal
Interface RS232	1× standard, 1× en option
Interface Wi-Fi^®	1× standard
Alimentation	100 ÷ 240 V AC 50 / 60 Hz + accumulateur
Temps de travail avec l'alimentation d'accumulateur	max 8h
Température du travail	-10 ÷ +40 °C
Humidité relative d'air	10% ÷ 85% RH sans condensation
Dimension du plateau	840×1200 mm
Dimensions d'appareil	1322×840×85 mm
Masse de balance avec le terminal	43 kg