Français

Produits Nouveautés Services Soutien Actualités Sur l'entreprise Contact

Le Site Principal > Produits > Balances industrielles > Balances multifonctionnelles > Balances multifonctionnelles WPY > Balance multifonctionnelle WPY 300/C2/K

Balance multifonctionnelle WPY 300/C2/K

Code produit: WP-111-0013

Il symbolise la conformité d’un produit avec les régularisations de l’Union Européenne. Le marquage CE sur le produit présente la conformité d’un produit avec d’autres règlements de sécurité déterminés par les directives du marquage CE.

La procédure de l’étendue de la métrologie légale, effectuée par l’administration des mesures (Les Bureaux de Mesures Régionaux ) sur la base des études d’un outil de mesure avant son introduction sur le marché. Pour la plupart des outils de mesure (pour les balances aussi) cette procédure n’est pas appliquée. Elle a été substituée par la vérification de la conformité.

Légalisation

La procédure de l’étendue de la métrologie légale, effectuée par l’administration des mesures (Les Bureaux de Mesures Régionaux ) sur la base des études d’un outil de mesure avant son introduction sur le marché. Pour la plupart des outils de mesure (pour les balances aussi) cette procédure n’est pas appliquée. Elle a été substituée par la vérification de la conformité.

Légalisation

2 ans de garantie

Poser des questions sur le produit

Fonctions

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Newton unit measurement

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

La balance multifonctionnelle WPY est conçue pour l’indication de masse rapidement et précisément dans les conditions industrielles. C’est possible grâce à l’application du terminal de balance PUE7. L’utilisation de balance est très facile et rend le processus de pesage maximalement automatique. À côté de ses fonctions de standard, la balance multifonctionnelle WPY permet le comptage, l’étiquetage et la formulation. Le logiciel de balance universel rend possible la collaboration avec les lecteurs de code-barres, les imprimantes de tickets de caisse, les imprimantes d’étiquettes, les lecteurs RFID et l’équipement PC (une souris, un clavier, une mémoire flash USB) par l’intermédiaire d’interfaces intégrés RS232, USB et Ethernet. La balance multifonctionnelle WPY connectée à l’imprimante d’étiquettes donne la possibilité d’impression d’étiquettes dans le but de marquer des marchandises pesées dans les conditions industrielles. Le système d’étiquetage imprime des étiquettes pour marquer des marchandises pesées, par exemple dans le processus d’emballage.

Capacité maximale [Max]	300 kg
Capacité minimale [Min]	2 kg
Précision de lecture	100 g
Étendue de tare	-300 kg
Temps de stabilisation	3 s
Température du travail	-10 ÷ +40
Dimension du plateau	400×500 mm
Alimentation	100 ÷ 240 V AC 50 ÷ 60 Hz / 12 V DC
Afficheur	5,7'' (panel tactile)
Communication interface	2×USB, 2×RS 232, Ethernet, 4entrées/4sorties (digital), Wireless Connection
Dimensions de colis	720×580×220 mm
Degré de protection	IP 43
Ajustage	externe
Classe de précision OIML	III
Masse nette/brute	11,1 / 13,1 kg

Documentation technique

Mode d'emploi
(3.90 MB) FR

E2R AUDIT TRAIL CFR21 p.11
(0.18 MB) FR

Fiche technique
(1.97 MB) FR

Conformity Declaration
(0.04 MB) FR

Publications et Matériaux Pédagogiques

Système THBR 2.0
(5.24 MB) FR

Terminal de balance PUE 7.1
(0.31 MB) FR

Balance multifonctionnelle WPY 300/C2/K

Capacité maximale [Max]: 300kg

Précision de lecture: 100g

Data exchange throughUSB storage devices

Senseurs d’infrarouge

Modes de travail

Interface de communication

Dosing

Labelling

Plus/Minus Control

Percent Weighing

Totalizing

Parts counting

Peak hold

Formulation

Newton unit measurement

Statistics

Checkweighing

IR sensors

Animal weighing

Differential weighing

ALIBI Memory

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Radwag Balances Électroniques

Data exchange through
USB storage devices