Terminal de pesaje PUE CY10

✆
Radwag Balanzas Electrónicas
NovedadesNovedades VídeosVídeos CatálogosCatálogos
Selected language Español
Pagina principal > Productos > Terminales > Terminal de pesaje PUE CY10 > Terminal de pesaje PUE CY10
Terminal de pesaje PUE CY10
This image is for reference only.

Terminal de pesaje PUE CY10

Código de producto: WX-008-0217
close
Change the model:
✓ Terminal de pesaje PUE CY10
Select all
Ver
Guardar
Quiero saber más
Búsqueda avanzada
Descripción
 

Terminal de pesaje PUE CY10

 
El terminal de pesaje PUE CY10 es un cabezal de balanzas de precisión y de plataforma de 1 sensor de la serie CY10. Cuenta con una carcasa duradera con protección de ingreso IP 43 y numerosas interfaces de comunicación, incluidas Ethernet, Hotspot y Wi-Fi®® (lista completa a continuación).
 
 

Innovación a la altura de ELLIPSIS

El terminal de pesaje PUE CY10 tiene todas las ventajas del terminal 5Y utilizado en las balanzas de la serie ELLIPSIS, es decir:
  • Pantalla de 10 pulgadas
  • Verificación de usuario sin compromisos
  • Punto de acceso Hotspot - use la balanza en cualquier dispositivo conectado. Puede ser un teléfono inteligente, una tableta o un ordenador
  • RFID - permite el acceso a capacidades definidas mediante la identificación por radiofrecuencia
  • Notas de voz y texto de Live Note
  • Comandos de voz para el dispositivo
  • Historial de mediciones dentro de la Handy Library
  • Widgets - preparado para mostrar lo que más necesitas en este momento
  • Ambient Light - el color de retroiluminación le informa sobre el estado, los resultados del proceso, los procedimientos o las alertas.
 
 
 

Funcionalidad de balanza de etiquetado

El terminal de pesaje PUE CY10 se ha ampliado con funciones específicas para las balanzas de etiquetado:
  • funciona con el programa informático Editor de etiquetas R02,
  • funciona con las impresoras de etiquetas ZEBRA,
  • admite etiquetas individuales, acumuladas y acumuladas de acumulativas,
  • permite la importación/exportación de plantillas de etiquetas mediante un pendrive,
  • permite asignar etiquetas a un producto o cliente e imprimir una etiqueta global.
 
 
 

Software para tareas especiales

El software del terminal de pesaje PUE CY10 tiene un conjunto de funciones innovadoras que facilitan el trabajo diario con la balanza:
  • cooperación con hasta 2 plataformas de pesaje,
  • actualización de datos estadísticos por separado para cada producto o globalmente,
  • modo de tara ampliado con la posibilidad de trabajar en del modo de “Entrega del producto final”. 
 
 
 

Modbus TCP/IP

es uno de los protocolos de comunicación más populares en la automatización industrial. Implementarlo en las balanzas 5Y y CY10 hace que los dispositivos de esta serie sean amigables para los integradores de automatización.
 
Una balanza en el sistema Modbus es un dispositivo esclavo (Slave) y realiza tareas especificadas por el dispositivo maestro (Master), que suele ser un controlador PLC. El protocolo Modbus TCP/IP en las balanzas 5Y y C10 permite, entre otras, las funciones de lectura de masa, puesta a cero y tara de la balanza, así como la configuración de la tara y los umbrales MIN y MAX.

 
 
 
 

Wi-Fi® es una marca registrada de Wi-Fi Alliance®.
Datos tecnicos
Pantalla

10″ gráfico color pantalla táctil

 

Grado de protección

IP 43

 

Chasis

ABS + aluminium

 

Conectividad

2×USB-A, USB-C, HDMI, Ethernet, Wi-Fi®, Hotspot

 

Alimentacion

12 – 15 V DC

 

Consumo de energía

1 A

 

Numero máximo de divisiones legalizadas

10000

 

Corriente mínima de 1 división legalizada

0,4 µV

 

Corriente maxima en una división legalizada

3,25 µV

 

Impedancia mínima de convertidor tensometrico

50 Ω

 

Impedancia máxima de convertidor tensométrico

1200 Ω

 

Corriente de alimentación en convertidor tensométrico

5V

 

Crecimiento maximo de la señal

19,5 mV

 

Conexión de convertidores tensométricos

4 o 6 hilos + Blindaje de cable

 

Temperatura de trabajo

-10 – +40

 °C

Sistema operativo

Linux

 

Procesador

quad-core Broadcom 1,5 GHz

 

Memoria

16 GB, 2GB RAM

 

Multirangos

SI

 

Numero máximo de plataformas en servicio

max.2

 

CE
Legalización Extra payment
for verification
2 año de garantía
Vídeos
New Menu Language in 5Y Series Balances: Japanese
PUE CY10 – Modern Technology in Industry
Complete Solutions for Mass Measurement in Pharma Industry
Funciones
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Wi-Fi®

Wi-Fi®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Documentación
Tarjetas de productos
Data Sheet Data Sheet
Data Sheet

Ver
Ver
Guardar
Guardar

Choose more product:
Ver Ver GuardarGuardar
Manual de usuario
User Manual
User Manual
Ver
Ver
Guardar
Guardar
(1.94 MB)
Manual de instrucciones
Manual de instrucciones
Ver
Ver
Guardar
Guardar
(1.36 MB)
Manual de instrucciones
Manual de instrucciones
Ver
Ver
Guardar
Guardar
(1.30 MB)
Start up Guide
Start up Guide
Ver
Ver
Guardar
Guardar
(3.12 MB)
CY10 Software Manual
CY10 Software Manual
Ver
Ver
Guardar
Guardar
(4.07 MB)
Software Manual
Software Manual
Ver
Ver
Guardar
Guardar
(0.95 MB)
Declaraciones de conformidad
Conformity Declarations
Conformity Declarations
Ver
Ver
Guardar
Guardar
(0.04 MB)
Publicaciones y folletos
RFID
RFID
Ver
Ver
Guardar
Guardar
(0.68 MB)
Hybrid Protective Glass
Hybrid Protective Glass
Ver
Ver
Guardar
Guardar
(1.86 MB)
Terminales y plataformas
Terminales y plataformas
Ver
Ver
Guardar
Guardar
(3.73 MB)
Accesorios

Newsletter

Suscríbete al newsletter si quieres recibir información sobre las novedades de RADWAG.

Ver más
Oferta
Productos
Novedades
Soporte
Calibration
User manuals
Descargar archivos
Servicios
Acceso remoto
Catálogos
Publicaciones
Blog
Registro del producto.
Complete la solicitud de servicio de RMA
Webinars
Radwag
Sobre la empresa
Sistema de calidad ISO
Certificados
Premios y Distinciones
Ferias y Conferencias
Contacto
Privacy policy
RADWAG Balanzas Electrónicas
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 RADWAG Balances and Scales. All rights reserved.

Selecionar idioma

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Português (Brasil)
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
E-mail:
Nombre de empresa
Nombre:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩