Báscula de paleta C315.4P 600.C

Deutsch English Español Français Italiano Polski Türkiye Česky USA

Pagina principal > Productos > Básculas industriales > Básculas para paletas y patines > Básculas para paletas > Báscula de paleta C315.4P 600.C

This image is for reference only.

Báscula de paleta C315.4P 600.C

Código de producto: WP-239-0003

Change the model (5)

done

Max: 600kgd: 200g

⤢

840×1200mm

expand_more

Báscula de paleta C315.4P.600/1500.C

Max: 600 / 1500kgd: 200 / 500g

⤢

840×1200mm

Báscula de paleta C315.4P.1500/3000.C

Max: 1500 / 3000kgd: 500 / 1000g

⤢

840×1200mm

Báscula de paleta C315.4P.1500.C

Max: 1500kgd: 500g

⤢

840×1200mm

Báscula de paleta C315.4P.3000.C

Max: 3000kgd: 1000g

⤢

840×1200mm

Maxima capacidad [Max]: 600 kg
Legibilidad [d]: 200 g

Change the model:

✓ Báscula de paleta C315.4P 600.C

✓ Báscula de paleta C315.4P.600/1500.C

✓ Báscula de paleta C315.4P.1500/3000.C

✓ Báscula de paleta C315.4P.1500.C

✓ Báscula de paleta C315.4P.3000.C

Select all

Ver

Guardar

Quiero saber más

Para comparar Búsqueda avanzada

Descripción

La báscula para paletas es una estructura de cuatro sensores estable y probada diseñada para pesar paletas. La carga se puede colocar en la báscula con una carretilla elevadora o grúa típica.
La báscula de paletas está equipada con ruedas y asas, lo que facilita enormemente el transporte al lugar de uso.
La escala está hecha de acero con recubrimiento en polvo. Tiene un Indicador PUE C315 con pantalla LCD retroiluminada instalada en un cable, que está protegido por un conducto de protección.
La longitud del cable que conecta el indicador con la plataforma - 3m.

Es posible hacer una balanza de doble rango por una tarifa adicional.

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Datos tecnicos

Maxima capacidad [Max]	600 kg
Minima capacidad	4 kg
Legibilidad [d]	200 g
Rango de tara	-600 kg
Legibilidad máxima para las balanzas no verificadas	200 g
Clase OIML	III
Pantalla	LCD (con retroiluminación)
Longitud del cable	3 m
Dimensión de platillo	840×1200 mm
Dimensiones de aparato	1322×840×85 mm
Dimensiones de embalaje	1400×900×430 mm
Masa de balanza con indicador	43 kg
Grado de protección	IP 65 construcción, IP 67 extensómetro, IP 43 medidor
Conectividad	RS232
Interfaces opcionales	RS232
Alimentacion	100 – 240 V AC 50/60 Hz + bateria
Consumo máximo de potencia	5 W
Horas de trabajo con baterias	max 8h
Temperatura de trabajo	-10 – +40 °C
Humedad relativa de aire	10% – 85% RH sin condensación

Additional fee
for verification

Funciones

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Documentación

Tarjetas de productos

Data Sheet