RW 5Y.F42 Robotic Weighing System

RW 5Y.F42 Robotic Weighing System is a mobile filter weighing station. Its important component is the multi-range robotic arm, which has a reach of 500 mm and a maximum capacity of 3 kg. The arm moves in several axes and has as many as six degrees of freedom, that is, it bends in six places.

Incomparable Microbalance Readability

RW 5Y.F42 is synonymous with full automation of filter weight measurement. The device is based on the XA 6.5Y.M.A Microbalance weighing mechanism, which provides incomparable repeatability and a readability [d] of 1 µg. The RW 5Y.F42 enables the weighing procedure and dust determination of up to 42 filters with a diameter of 47 mm.

The Cobot’s Helping Hand

A cobot working together with the balance takes samples from the magazine, identifies them with a 2D code reader, and then ionizes and weighs them. The use of a cobot equipped with a range of certified safety systems allows the robot to interact directly with laboratory personnel and minimize the space required for its work. Monitoring of ambient conditions records the current environmental circumstances, allows them to be viewed and data reported.

What Do You Get When You Buy the RW 5Y.F42?

XA 6.5Y.M.A Microbalance with a draft shield
Cobot, which is a robot with a gripper that allows you to transport filters between the magazine and the microbalanc
Magazine for storing filters (storage capacity: 42 cassettes)
Ionizer
Camera for casettes identification
THB-S Sensor which monitors ambient conditions, mostly temperature, humidity and pressure
5Y weighing terminal for managing the operation of the device
QR code reader built into the device
PC with RMCS Filters software to manage the operation of the entire device.

Ergonomics and Compatibility of RADWAG Products

The 10-inch touchscreen display of the 5Y terminal guarantees readability of the result from many angles and comfort of use. The ergonomics of work is also enhanced by touch-free operation of the device. Thanks to the available communication interfaces, the RW 5Y.F42 will connect you to a spreadsheet (USB-C), to a smartphone or tablet (Hotspot), a printer (Ethernet, Wi-Fi^®, USB-A), a computer (Ethernet, Wi-Fi^®, USB-A), a barcode scanner (USB-A), as well as to a keyboard and mouse.

What Do You Gain When You Buy the RW 5Y.F42?

Fully automated weighing system for 47 mm diameter filters
Compliance with EN 12341:2014
Time savings compared to the procedure of weighing filters manually
Elimination of the human factor as a cause of measurement errors
Process management with RMCS Filter software
Automatic data recording as well as creating reports and statistics
Identification of filters thanks to a system of QR codes applied to the casettes
Elimination of the influence of electrostatics on the measurement
Mobility of the system
Ease of installation and operation.

Wi-Fi^® is a registered trademark of Wi-Fi Alliance^®.

Datasheet

Maximum capacity [Max]	6.1 g
Minimum load	0.1 mg
Readability [d]	1 µg
Verification unit [e]	1 mg
Tare range	-6.1 g
Standard repeatability [5% Max]	0.8 µg
Sensitivity time drift	1×10⁻⁶/Year×Rt
Stabilization time	~3.5 s
Adjustment	internal (automatic)
Display	10″ graphic colour touchscreen
Device dimensions	1087×755×1225 mm
Communication interface	2×USB-A, USB-C, HDMI, Ethernet, Wi-Fi^®, Hotspot
Power supply	100 – 240 V AC 50/60 Hz
Operating temperature	+10 — +40 °C
Operating temperature change rate	±0.3°C/1h (±1°C/8h)
Relative humidity	40% — 80%
Relative humidity change rate	±1%/h (±4%/8h)
Time of one measurement cycle	45 s
Full measurement cycle time for 42 samples	31.5 minutes
Storage capacity	42 pcs