Präzisionswaage WLC 1/10.X7

Radwag Elektronische Waagen
Selected language Deutsch
Präzisionswaage WLC 1/10.X7
Übersichtsbild

Präzisionswaage WLC 1/10.X7

Produktcode: WL-227-0009
Modell ändern (7)
done
Max: 10kgd: 0,01 / 0,1g

 195×195mm
expand_more
Max: 0,2kgd: 0,001g

 ø100mm
Max: 2kgd: 0,01g

 195×195mm
Max: 6kgd: 0,1g

 195×195mm
Max: 10kgd: 0,1g

 195×195mm
Max: 20kgd: 0,1g

 195×195mm
Max: 21kgd: 1g

 195×195mm
Wägebereich [Max]: 10 kg
Ziffernschritt [d]: 0,01 / 0,1 g

close
Modell ändern:
Präzisionswaage WLC 0.2.X7
Präzisionswaage WLC 2.X7
Präzisionswaage WLC 6.X7
Präzisionswaage WLC 10.X7
Präzisionswaage WLC 1/10.X7
Präzisionswaage WLC 20.X7
Präzisionswaage WLC 21.X7
zum Vergleich Erweiterte Suche
Beschreibung

Präzisionswaage WLC 1/10.X7

 
WLC X7 Präzisionswaagen sind technologisch fortschrittliche und gleichzeitig einfach zu bedienende Waagen zu einem sehr guten Preis. Sie verfügen über übersichtliche Menüs und ein 7-Zoll-Touchscreen.
 
 
 

Neue Möglichkeiten

Eigenschaften und Funktionen wie:
  • 7"-Farb-Touchscreen
  • Personalisierung des Bildschirms durch Widgets
  • Mehrsprachiges, interaktives Menü
  • Berührungslose Bedienungssensoren
  • Konformität mit GLP- und GMP-Anforderungen
  • Dynamische Gewichtskontrolle der Probe (Bargraph)
  • Statistiken, Rezepturen, Berichte und Ausdrucke
  • Unbegrenzte Kommunikationsmöglichkeiten
  • ALIBI-Speicher mit Messdatenerfassung
  • Erweiterte Datenbanken
  • Höchster Bedienkomfort
  • Interne/externe Justierung
gewährleisten dem Benutzer höchste Wägegenauigkeit und maximalen Bedienkomfort.
 
 
 

Personalisierung durch Widgets

Mit der WLC X7 Präzisionswaage können Sie das Informationslayout auf dem Display mithilfe einer großen Auswahl an Widgets gestalten. Die Personalisierung des WLC X7 Displays bietet Zugriff auf Informationen und Arbeitsergebnisse direkt vom Hauptbildschirm aus.

Die Waagen sind mit mehreren Kommunikationsschnittstellen ausgestattet: 2 x RS232, USB-A, USB-B, Ethernet und Wi-Fi®.

Das Gehäuse dieser Geräte ist aus Kunststoff und die Waagschale aus Edelstahl gefertigt.
 
 
 

Datenbanken

Das Informationssystem der WLC X7 Präzisionswaagen basiert auf 7 Datenbanken, die es mehreren Benutzern ermöglichen, mit einer Datenbank von vielen Produkten zu arbeiten. Die in der Datenbank gesammelten Wägedaten können weiter analysiert werden.
Die Daten werden in 7 Datenbanken gespeichert:
  • Benutzer (bis zu 100 Benutzer),
  • Produkte (bis zu 5.000 Artikel),
  • Wägungen (bis zu 50.000 Wägungen),
  • Verpackungen (bis zu 100 Verpackungen),
  • Rezepturen (bis zu 100 Rezepturen),
  • Kunden (bis zu 100 Kunden),
  • ALIBI-Speicher (bis zu 512.000 Wägungen).
Zusätzlich können Rezepturberichte (bis zu 500 Berichte) erstellt werden.
 
 
 

Datenverwaltung

Die Verwendung der USB-Schnittstelle ermöglicht eine schnelle Übertragung und Kopie der Betriebsergebnisse (Messungen, Berichte, Datenbanken) auf einen Computer oder eine andere Waage. Die Datenverwaltung in der Waage ist auch online über den Fernzugriff auf die Waage und ihre Datenbank möglich.
 
 
 

ALIBI--Speicher

PS X7 Präzisionswaagen verfügen über einen ALIBI-Speicher, der Sicherheit garantiert, da er die Messungen automatisch registriert und außerdem das Anzeigen, Kopieren und Archivieren der Daten ermöglicht. Der ALIBI-Speicher ermöglicht die Speicherung von bis zu 512.000 Wägedaten.
 
 
Unterflurwägung
Waagen, die nach dem 15.02.2023 gekauft wurden, ermöglichen Unterflurwägung zu einem beliebigen Zeitpunkt nach dem Kauf des Geräts. Alles, was Sie tun müssen, ist, einen speziellen Haken zu erwerben.
 
THBR 2.0 System
Die Waagen sind mit dem THBR 2.0-System zur Überwachung von Umgebungsbedingungen kompatibel.
 
 
Edelstahl in RADWAG-Produkten
Erfahren Sie mehr über die Verwendung und Pflege von Edelstahlprodukten:
Rostfreier Stahl in RADWAG-Produkten. Standard- und Spezialanwendungen

Wi-Fi® ist eine eingetragene Marke der Wi-Fi Alliance®.
Technische Daten
Wägebereich [Max]

10

 kg

Ziffernschritt [d]

0,01 / 0,1

 g

Eichwert [e]

-

 

Tarierbereich

-10

 kg

Wiederholbarkeit

0,015 / 0,08

 g

Linearität

±0,03 / 0,3

 g

Stabilisierungszeit

4 / 2

 s

Justierung

extern

 

Nivelliersystem

manuell

 

Display

7″ grafisch farbiger Touchscreen

 

Lieferumfang

Waage, Waagschale, Waagschalenabdeckung, Erdungsfuß ×1, Fußzeile ×3, Netzteil.

 

Waagschale

195×195

 mm

Verpackungsgröße

430×270×190

 mm

Nettogewicht

2,2

 kg

Bruttogewicht

3,8

 kg

Schutzart

IP 43

 

Datenbankkapazität

7

 

Schnittstellen

2×RS232¹, USB-A, USB-B, Ethernet, Wi-Fi®

 

Stromversorgung

Adapter: 100 – 240V AC 50/60Hz 0,6A; 12V DC 1,2A
Waage: 10 – 15VDC 0,6A max

 

Umgebungstemperatur

+10 – +40

 °C

CE
Wiederholbarkeit wird als Standardabweichung von 10 Wägezyklen ausgedrückt.
Die Stabilisierungszeit ist abhängig von den Umgebungsbedingungen und der Geschwindigkeit bei Auflegen der Last auf der Waagschale; für FAST-Profil definiert.
1 Die als Zubehör erhältlichen Barcode-Scanner arbeiten mit der Waage nur über die RS232-Schnittstelle.
Videos
WLC X7 Balances - New era of precision
Funktionen
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Mass for titrator

Mass for titrator

'Mass value for a titrator' working mode enables establishing connection between the weighing device and a titrator. The titrator receives information about the quantity of dispensed mass, and the weighing instrument receives a signal to start subsequent weighing.

Wi-Fi®

Wi-Fi®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Dokumentation
Datenblatt
Data Sheet Data Sheet
Data Sheet

Details anzeigen
Details anzeigen
Download
Download

Choose more product:
Details anzeigen Details anzeigen DownloadDownload
Bedienungsanleitungen
User Manual
User Manual
Details anzeigen
Details anzeigen
Download
Download
(22.95 MB)
Start up Guide
Start up Guide
Details anzeigen
Details anzeigen
Download
Download
(6.22 MB)
Publikationen und Broschüren
Laboratory balance cleaning
Laboratory balance cleaning
Details anzeigen
Details anzeigen
Download
Download
(2.52 MB)
RTP Thermal Receipt Printer
RTP Thermal Receipt Printer
Details anzeigen
Details anzeigen
Download
Download
(1.64 MB)
Direkte Kommunikation Waage-PC
Direkte Kommunikation Waage-PC
Details anzeigen
Details anzeigen
Download
Download
(0.32 MB)
Lexikon der Grundlegenden Metrologischen Begriffe
Lexikon der Grundlegenden Metrologischen Begriffe
Details anzeigen
Details anzeigen
Download
Download
(7.88 MB)
Laboratory Balances
Laboratory Balances
Details anzeigen
Details anzeigen
Download
Download
(1.68 MB)
Stainless Steel in RADWAG products. Standard and special applications
Stainless Steel in RADWAG products. Standard and special applications
Details anzeigen
Details anzeigen
Download
Download
(2.23 MB)
Defined Weighing Profiles
Defined Weighing Profiles
Details anzeigen
Details anzeigen
Download
Download
(1.38 MB)
X7 Series Laboratory Balances
X7 Series Laboratory Balances
Details anzeigen
Details anzeigen
Download
Download
(9.29 MB)
Software
Drivers

RADWAG USB DRIVER 1.6.2 (1.25 MB)

Zubehör

Newsletter

Subscribe to the newsletter if you would like to receive RADWAG news.

View more
RADWAG Elektronische Waagen
Torunska 5
26-600 Radom
Polen
Tel.: +48 48 386 60 00
E-mail: export@radwag.com
VAT Nr.: 796-000-03-27
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 RADWAG Elektronische Waagen. Alle Rechte vorbehalten.

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Português (Brasil)
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
E-Mail
Firma:
Vorname:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩
close