Präzisionswaage PS 8100.X2.M.PGC in FPVO Waagen - Radwag Elektronische Waagen

Präzisionswaage PS 8100.X2.M.PGC

Radwag Balances and Scales - Advanced Weighing Technologies
Selected language Deutsch
Präzisionswaage PS 8100.X2.M.PGC in FPVO Waagen
This image is for reference only.
Präzisionswaage PS 8100.X2.M.PGC
Produktcode: WK-306-0009
Select model (5)
done
Max: 8100gd: 0,1g

 195×195mm
expand_more
Max: 750gd: 0,01g

 128×128mm
Max: 2100gd: 0,1g

 195×195mm
Max: 4500gd: 0,1g

 195×195mm
Max: 6100gd: 0,1g

 195×195mm
Beschreibung
PS X2.M ist eine Serie von Standard- Präzisionswaagen mit hoher Belastbarkeit auf Basis der RADWAG MonoBLOCK®-Technologie. Die innovative Konstruktion der Waage PS X2.M zeichnet sich durch eine... mehr ››
Wägebereich [Max]: 8100g
Ziffernschritt [d]: 0,1g

close
Select model:
Präzisionswaage PS 750.X2.PGC
Präzisionswaage PS 2100.X2.M.PGC
Präzisionswaage PS 4500.X2.M.PGC
Präzisionswaage PS 6100.X2.M.PGC
Präzisionswaage PS 8100.X2.M.PGC
Select all
Mehr sehen
Download
Angebot anfordern
Beschreibung
PS X2.M ist eine Serie von Standard- Präzisionswaagen mit hoher Belastbarkeit auf Basis der RADWAG MonoBLOCK®-Technologie. Die innovative Konstruktion der Waage PS X2.M zeichnet sich durch eine neue Ein-Punkt-Befestigung der Waagschale aus, die eine hervorragende Geometrie gewährleistet und Exzentrizitätsfehler minimiert. Die Labyrinth-Konstruktion gewährleistet eine hohe Beständigkeit gegen Verschmutzung.
Die RADWAG MonoBLOCK®-Technologie ermöglicht das Wägen von Lasten mit einer Ablesbarkeit von d=0,01g bei einer maximalen Belastbarkeit von 10 kg. Die stabile Basis sorgt für Stabilität des Wägesystems und hohe Stoßfestigkeit.
Das interne Justiersystem garantiert Präzision und hohe Wiederholgenauigkeit der Messungen,  als auch ermöglicht die Kalibrierung im gesamten Messbereich bei geringem Eigengewicht.

Funktionen PS X2.M:
  • Ablesbarkeit d=0,01g bei 10kg Belastbarkeit
  • hohe Beständigkeit gegen Umgebungsbedingungen
  • Stabilität und Wiederholbarkeit im Laufe der Zeit
  • RADWAG MonoBLOCK® Technologie
  • interne Justierung im gesamten Messbereich
  • umfangreiche Datenbanken und ALIBI-Speicher
  • ergonomischer 5" Farb-Touchscreen
  • berührungslose Bedienung möglich
Datenbanken
Das Gerät ermöglicht die Speicherung der fertigen Wägungen in Form von komplexen Berichten und Grafiken.
Die Daten werden in sieben Datenbanken gespeichert:
  • Bediener (max. 100 Einträge),
  • Produkte (max. 5 000 Einträge),
  • Wägungen (max. 50 000 Einträge),
  • Verpackung (max. 100 Einträge),
  • Rezeptur (max. 100 Einträge),
  • Kunden (max. 1000 Einträge),
  • Die Waage ermöglicht die Erstellung von Rezepturberichten (max. 500 Einträge).
ALIBI-Speicher bietet Datensicherheit und ermöglicht eine automatische Messwerterfassung (max. 500.000 Wägungen). Der Speicher erleichtert die Datenvorschau, das Kopieren und die Archivierung.

Kommunikation
Die PS X2.M Serie ist mit folgenden Schnittstellen ausgestattet: 2 x RS 232, USB Typ A, USB Typ B, Ethernet und Wireless Connection.
USB ermöglicht die schnelle Übertragung und das Kopieren von Arbeitsergebnissen (Messungen, Berichte, Datenbanken) auf einen Computer oder andere Waagen. Die Waage bietet die Möglichkeit der Datenfernüberwachung.
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications
Technische Daten
Wägebereich [Max]

8100

 g

Min. Belastung

0,5

 g

Ziffernschritt [d]

0,1

 g

Tarierbereich

-8100

 g

Eichwert [e]

0,1

 g

Min. Einwaage USP

10

 g

Min. Einwaage

1

 g

Wiederholbarkeit (Max)

0,01

 g

Wiederholbarkeit (5% Max)

0,005

 g

Linearität

±0,03

 g

Stabilisierungszeit

1,5

 s

Justierung

intern (automatisch)

 

OIML-Klasse

II

 

Levelling system

semi-automatic - LevelSENSING

 

Display

5” kapazitiv farbiger touchscreen

 

Waagschale

195×195

 mm

Abmessungen Gerät

333x206x107

 mm

Verpackungsgröße

470×380×336

 mm

Nettogewicht

5,7

 kg

Bruttogewicht

7,3

 kg

Schutzart

IP 43

 

Datenbasis-Größe

7

 

Schnittstelle

2×RS232, USB-A, USB-B, Ethernet, Wi-Fi®

 

Berührungslose Bedienung

zwei IR-Sensoren

 

Stromversorgung

100 — 240 V AC 50 / 60 Hz

 

Maximaler Leistungsaufnahme

4 W

 

Umgebungstemperatur

+10 — +40

 °C

Relative Luftfeuchtigkeit

40% — 80%

 

Wiederholbarkeit wird als Standardabweichung von 10 Wägezyklen ausgedrückt.
Die Stabilisierungszeit ist abhängig von den Umgebungsbedingungen und der Geschwindigkeit bei Auflegen der Last auf der Waagschale; für FAST-Profil definiert.
Funktionen
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Replaceable unit

Replaceable unit

Replaceable units.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Mass for titrator

Mass for titrator

'Mass value for a titrator' working mode enables establishing connection between the weighing device and a titrator. The titrator receives information about the quantity of dispensed mass, and the weighing instrument receives a signal to start subsequent weighing.
Wi-Fi®

Wi-Fi®

Wi-Fi® offers possibility to send data from balance to a mobile iOS or Android device, via special data management apps. Wireless communication between the indicator and the weighing instrument enables operating the balance that is placed inside a laminar flow hood or a fume cupboard.
Dokumentation
Produktkarten
Data Sheet


Mehr sehen

Download

Choose more product:
Mehr sehen Download
Bedienungsanleitungen
Bedienungsanleitungen - Waagen der serie X2

Mehr sehen

Download
(3.23 MB)
Start up Guide

Mehr sehen

Download
(7.16 MB)
Konformitätserklärungen
Conformity Declaration

Mehr sehen

Download
(0.04 MB)
Publikationen und Broschüren
Direkte Kommunikation Waage-PC

Mehr sehen

Download
(0.32 MB)
Stainless Steel in RADWAG products. Standard and special applications

Mehr sehen

Download
(2.44 MB)
Waagen der Serie X2

Mehr sehen

Download
(1.74 MB)
Defined Weighing Profiles

Mehr sehen

Download
(1.36 MB)
FPVO Waagen

Mehr sehen

Download
(3.94 MB)
Prazisionswaagen PS M

Mehr sehen

Download
(1.58 MB)
Software
Drivers

RADWAG USB DRIVER 1.6.2 (1.25 MB)

RADWAG Elektronische Waagen
Torunska 5
26-600 Radom
Polen
Tel.: +48 48 386 60 00
E-mail: export@radwag.com
VAT Nr.: 796-000-03-27
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2021 RADWAG Elektronische Waagen. Alle Rechte vorbehalten.

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Subscribe
Facebook
Youtube
Vimeo
LinkedIn
Webinars
close