Plattformwaage H315.4.6000.H9

Die Messung der Masse mit Hilfe eines 4-Sensor-Systems garantiert die Zuverlässigkeit des Wägens bei einer belieben Platzierung des Wägeguts auf der Plattform.

Die 4-Sensor-Waage

Die 4-Sensor-Waage wird vollständig aus Edelstahl gefertigt. Die Waage ist mit einem Sensor im rostfreien Gehäuse PUE H315 mit einem hinterleuchteten LCD-Display ausgestattet und kann an der Wand aufgehängt werden.

Das Verbindungskabel zwischen dem Wägeterminal und der Plattform hat eine Länge von 3 m.

Auf Anfrage können Waagen auch mit zwei Messbereichen geliefert werden.

Edelstahl in RADWAG-Produkten
Erfahren Sie mehr über die Verwendung und Pflege von Edelstahlprodukten:
Rostfreier Stahl in RADWAG-Produkten. Standard- und Spezialanwendungen

Technische Daten

Wägebereich [Max]	6000 kg
Min. Belastung	40 kg
Ziffernschritt [d]	2000 g
Eichwert [e]	2 kg
Tarierbereich	-6000 kg
Max Ablesbarkeit [d] bei nicht geeichter Waage	500 g
OIML-Klasse	III
Display	LCD (hinterleuchtet)
Kabellänge	3 m
Waagschale	1500×1500 mm
Höhe Wägeplattform	88 mm
Verpackungsgröße	1600×1600×500 mm
Gewicht der Waage mit Messgerät	190 kg
Bruttogewicht	300 kg
Schutzart	IP 68 Konstruktion, IP 68 (1h max)/69 Messgerät
Schnittstellen	RS232, USB
Optionale Schnittstellen	RS232 oder RS485 oder 4IN/4OUT oder Ethernet oder Analogausgang 4-20 mA
Stromversorgung	100 – 240 V AC 50/60 Hz
Optionale Stromversorgung	interner Akkumulator
Akku-Betriebszeit	max 7h
Umgebungstemperatur	-10 – +40 °C
Relative Luftfeuchtigkeit	10% – 85% RH ohne Kondensation

Extra payment
for verification

Videos

Complete Solutions for Mass Measurement in Pharma Industry

Funktionen

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Dokumentation

Datenblatt

Data Sheet

Details anzeigen

Download

Choose more product:

Details anzeigen

Download

Bedienungsanleitungen

Details anzeigen

Download

(1.03 MB)

User Manual - PUE H315