PS 4500.X7.M.PUK Hassas Terazi

✆
Radwag Terazileri İleri Tartım Teknolojileri
Yeni ürünlerYeni ürünler
Selected language Türkiye
Ana Sayfa > Ürün > PUK kontrol terazileri > İstatistiksel kontrol terazileri > PUK için PS X7 terazileri > PS 4500.X7.M.PUK Hassas Terazi
PS 4500.X7.M.PUK Hassas Terazi
This image is for reference only.

PS 4500.X7.M.PUK Hassas Terazi

Ürün kodu: WK-313-0003
Modeli değiştirin (5)
done
PS 4500.X7.M.PUK Hassas Terazi
Max: 4500gd: 0,1g

⤢

 195×195mm
expand_more
PS 750.X7.PUK Hassas Terazi
Max: 750gd: 0,01g

⤢

 128×128mm
PS 2100.X7.M.PUK Hassas Terazi
Max: 2100gd: 0,1g

⤢

 195×195mm
PS 6100.X7.M.PUK Hassas Terazi
Max: 6100gd: 0,1g

⤢

 195×195mm
PS 8100.X7.M.PUK Hassas Terazi
Max: 8100gd: 0,1g

⤢

 195×195mm
Maksimum yük [Max]: 4500 g
Okuma doğruluğu [d]: 0,1 g

close
Modeli değiştirin:
✓ PS 750.X7.PUK Hassas Terazi
✓ PS 2100.X7.M.PUK Hassas Terazi
✓ PS 4500.X7.M.PUK Hassas Terazi
✓ PS 6100.X7.M.PUK Hassas Terazi
✓ PS 8100.X7.M.PUK Hassas Terazi
Select all
Bakış
İndirme
Request a quote
Karşılaştırmak için ürün ekleyin Advanced Search
Genel Açıklama
 

PS 4500.X7.M.PUK Hassas Terazi

 
Kantarın amacı önceden paketlenmiş ürünleri (PGC) kontrol etmektir, bu nedenle yasallaştırmanın gerekli olduğunu unutmayın.
Uygun yasallaştırmaya sahip bir terazi sipariş etmenizi öneririz.
 
PS X7.M

MONO

BLOCK®  teknolojisine dayanan, yüksek çözünürlüklü profesyonel sınıf hassas teraziler serisidir. PS X7.M'nin yenilikçi yapısı, mükemmel bir geometri sağlayan ve merkezden kaçıklık hatasını en aza indiren yeni tek-noktalı tartım kefesi bağlantı özelliğine sahiptir. Labirent şekilli çözüm, kirlenmeye karşı mükemmel bir direnç sağlar. 
 
 
 

MONO

BLOCK

MONO

BLOCK® teknolojisi, maksimum 10 kg'lık kapasitede d = 0,01 g okunabilirlik ile yüklerin tartılmasını mümkün kılar. Rijit kaide, tartım sisteminin kararlılığını ve darbelere karşı büyük direnç göstermesini sağlar.

Dâhili ayar sistemi, hassas ve yüksek ölçüm tekrarlanabilirliği anlamına gelir. Dâhili ağırlık kütlesin getirdiği avantaj tüm ölçüm aralığında ayarlanmayı sağlar.
 
 
 

Özellikler:

  • 10 kg maks. kapasitede d=0.01g okunabilirlik
  • Ortam koşullarına karşı büyük direnç
  • Uzun süre kararlılık ve tekrarlanabilirlik

  • MONO

    BLOCK® teknoloji
  • Tüm ölçüm aralığında dâhili ayar
  • Karmaşık veri tabanları ve ALIBI bellek
  • Ergonomik, 7” renkli dokunmatik ekran
  • Eller serbest çalışma
 
 
 

Veritabanları

PS X7.M hassas terazilerinde bilgi sistemi, birden fazla kullanıcının birden fazla üründen oluşan bir veri tabanı ile çalışmasına olanak tanıyan 11 veri tabanına dayanır ve veri tabanında toplanan tartımlar daha fazla analiz edilebilir.
Veriler 11 veritabanında toplanır:
  • Ürünler (5.000 ürün)
  • Kullanıcılar (100 kullanıcı)
  • Ambalajlar (100 ambalaj)
  • Müşteriler (1 000 müşteri)
  • Reçeteler (100 reçete)
  • Reçete raporları (500 rapor)
  • Çevresel koşullar (10 000 kayıt)
  • Tartımlar (50.000 kayıt)
  • Alibi bellek (512.000 kayıt)
  • Kontrol raporları (1 000 rapor) 
  • Ortalama dara (1.000 rapor).
 
 
 

ALIBI bellek

PS X7.M hassas terazileri, ölçümleri otomatik olarak kaydettiği için güvenliği garanti eden ve ayrıca verilerin görüntülenmesine, kopyalanmasına ve arşivlenmesine olanak tanıyan bir ALIBI bellek ile donatılmıştır. ALIBI bellek 512.000'e kadar tartım kaydının saklanmasına olanak sağlar.
 
 
 

Yeni olanaklar

PS X7.M hassas terazileri, çok çeşitli widget'lar aracılığıyla ekrandaki bilgilerin düzenini tasarlamanıza olanak tanır. PS X7.M terazi ekranını kişiselleştirmek, bilgilere ve çalışma sonuçlarına doğrudan ana ekran panelinden erişmenizi sağlar. PS X7.M hassas terazileri birden fazla iletişim arayüzü ile donatılmıştır: 2 x RS232, USB-A, USB-B, Ethernet ve Wi-Fi®. Terazinin gövdesi plastikten ve kefesi paslanmaz çelikten yapılmıştır.

USB, iş sonuçlarının (ölçümler, raporlar, veri tabanları) bir bilgisayara veya başka bir tartı cihazına hızlı aktarımına ve kopyalanmasını mümkün kılar. Terazi, uzak veri yönetimi olanağı sağlar.
 
 
 
THBR 2.0 Sistemi
Kantarlar, çevre koşullarını izlemek için THBR 2.0 sistemiyle birlikte çalışır.
 
 
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
Teknik Veriler
Maksimum yük [Max]

4500

 g

Minimum yük [Min]

5

 g

Okuma içinğruluğu [d]

0,1

 g

Yasallaştırma birimi [e]

0,1

 g

Dara aralığı

-4500

 g

Minimum ağırlık (USP)

10

 g

Minimum ağırlık (U=1%,k=2)

1

 g

Tekrarlanabilirlik (Max)

0,008

 g

Düşük yükte tekrarlanabilirlik

0,005

 g

Doğrusallık

±0,02

 g

Kararlılık süresi

1,5

 s

Ayarlama

dahili (otomatik)

 

OIML sınıfı

II

 

Tesviye sistemi

manuel

 

Display

7″ grafik renkli dokunmatik

 

Kiti bileşenleri

Teraziler, tartım kefesi, tartım kefesi kapağı, güç adaptörü

 

Tartım kefesi boyutları

195×195

 mm

Cihaz boyutları

333x206x107

 mm

Ambalaj boyutları

476×381×346

 mm

Net ağırlık

4,5

 kg

Brüt ağırlık

6,1

 kg

IP Sınıfı

IP 43

 

Veri tabanı kapasitesi

Ürünler, Kullanıcılar, Ambalajlar, Müşteriler, Reçeteler, Reçete raporları, Çevresel koşullar, Tartımlar, Alibi bellek, Kontrol raporları, Ortalama dara

 

Temassız çalışma

2 kızılötesi sensör

 

Haberleşme arayüzü

2×RS232¹, USB-A, USB-B, Ethernet, Wi-Fi®

 

Güç kaynağı

Adapter: 100 – 240V AC 50/60Hz 0,6A; 12V DC 1,2A
Teraziler: 12 – 15V DC 0,8A max

 

Güç tüketimi

4 W

 

Çalıştırma sıcaklığı

+10 – +40

 °C

Depolama sıcaklığı

-20 – +50

 °C

Atmosferik nem

40% – 80%

 

CE
Doğrulama Additional fee
for verification
Tekrarlanabilirlik, kütle standardının 10 yerleştirmesinin standart sapması olarak ifade edilir.
Kararlılık süresi dış koşullara ve kefeye yük yerleştirme dinamiklerine bağlıdır; FAST profili için belirtilmiştir.
Fonksiyonlar
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Mass for titrator

Mass for titrator

'Mass value for a titrator' working mode enables establishing connection between the weighing device and a titrator. The titrator receives information about the quantity of dispensed mass, and the weighing instrument receives a signal to start subsequent weighing.

Wi-Fi®

Wi-Fi®

Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Dokümantasyon
Data Sheet Data Sheet
Data Sheet

Bakış
Bakış
İndirme
İndirme

Choose more product:
Bakış Bakış İndirmeİndirme
User Manual
User Manual
Bakış
Bakış
İndirme
İndirme
(22.95 MB)
Start up Guide
Start up Guide
Bakış
Bakış
İndirme
İndirme
(6.22 MB)
Laboratory balance cleaning
Laboratory balance cleaning
Bakış
Bakış
İndirme
İndirme
(2.52 MB)
RTP Thermal Receipt Printer
RTP Thermal Receipt Printer
Bakış
Bakış
İndirme
İndirme
(1.64 MB)
USB Free Link - Direct Balance-PC Communication
USB Free Link - Direct Balance-PC Communication
Bakış
Bakış
İndirme
İndirme
(2.07 MB)
Stainless Steel in RADWAG products. Standard and special applications
Stainless Steel in RADWAG products. Standard and special applications
Bakış
Bakış
İndirme
İndirme
(2.23 MB)
Defined Weighing Profiles
Defined Weighing Profiles
Bakış
Bakış
İndirme
İndirme
(1.36 MB)
X7 Series Laboratory Balances
X7 Series Laboratory Balances
Bakış
Bakış
İndirme
İndirme
(9.29 MB)
İndirme
Drivers

RADWAG USB DRIVER 1.6.2 (1.25 MB)

İndirme
Aksesuarlar
R-LAB

Aksesuarlar

Newsletter

Subscribe to the newsletter if you would like to receive RADWAG news.

View more
Offer
Ürün
Yeni ürünler
Destek
Calibration
User manuals
İndirme
Service
Uzaktan yardım
Kataloglar
Yayınlar
Blog
Service evaluation survey
Fill out the RMA service request
Webinars
Radwag
Firma
ISO Kalite Sistemi
Ürün sertifikaları
Prizes and Awards
Fuarlar ve Konferanslar
İletişim
Gizlilik Politikası
Radwag Terazileri İleri Tartım Teknolojileri
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2024 RADWAG Balances and Scales. All rights reserved.

Bir dil seçin

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Česky
Português (Brasil)
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
close
e-posta:
Firma ismi:
İsminiz:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩