C32.10.PM Hassas Terazi

C32.10.PM Hassas Terazi

Ürün kodu: WL-223-0005

Modeli değiştirin (8)

done

C32.10.PM Hassas Terazi

Max: 10kgd: 0,01g

⤢

200×185mm

expand_more

C32.15.PM Hassas Terazi

Max: 15kgd: 0,01g

⤢

200×185mm

C32.25.PM Hassas Terazi

Max: 25kgd: 0,1g

⤢

350×260mm

C32.35.PM Hassas Terazi

Max: 35kgd: 0,1g

⤢

350×260mm

C32.60.PM.05 Hassas Terazi

Max: 60kgd: 0,5g

⤢

400×500mm

C32.60.PM Hassas Terazi

Max: 60kgd: 0,1g

⤢

400×500mm

C32.60.PM.1 Hassas Terazi

Max: 60kgd: 1g

⤢

400×500mm

C32.120.PM Hassas Terazi

Max: 120kgd: 0,2g

⤢

400×500mm

Maksimum yük [Max]: 10 kg
Okuma doğruluğu [d]: 0,01 g

Modeli değiştirin:

✓ C32.10.PM Hassas Terazi

✓ C32.15.PM Hassas Terazi

✓ C32.25.PM Hassas Terazi

✓ C32.35.PM Hassas Terazi

✓ C32.60.PM.05 Hassas Terazi

✓ C32.60.PM Hassas Terazi

✓ C32.60.PM.1 Hassas Terazi

✓ C32.120.PM Hassas Terazi

Select all

Bakış

İndirme

Karşılaştırmak için ürün ekleyin Advanced Search

PM Balances by RADWAG

Laboratory Precision Under Industrial Conditions.

New technology

The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability,

minimum eccentricity error over the entire range,
quick and stable measurement (achievable within 1 second),
parameter stability over time and during transport,
weighing pan dimensions adapted to the accuracy of the balance

are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced

MONO

BLOCK^® technology.

The change in the design of the has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions.

PM balances also include:

robust design based on a larger and taller Monoblock,
built-in 4-point overload protection system,
IP 43 ingress protection,
internal adjustment,
5" colour display,
easy start-up, intuitive operation, and ergonomics.

Application

PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors.

Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices.

PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required.

Under-Pan Weighing

Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook.

THBR 2.0 System

Cooperation with THBR 2.0 System for ambient conditions monitoring.

* RFID ISO/IEC 14443 Type A, 13,56 MHz

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Maksimum yük [Max]	10 kg
Minimum yük [Min]	0,5 g
Ön yük	1 kg
Okuma içinğruluğu [d]	0,01 g
Yasallaştırma birimi [e]	0,1 g
Dara aralığı	-10 kg
Minimum ağırlık (USP)	8,2 g
Minimum ağırlık (U=1%,k=2)	0,82 g
Tekrarlanabilirlik (Max)	0,01 g
Düşük yükte tekrarlanabilirlik	0,004 g
Doğrusallık	±0,025 g
Kararlılık süresi	1 s
Ayarlama	dahili (otomatik)
OIML sınıfı	II
Tesviye sistemi	manuel
Display	5” grafik renkli
Tartım kefesi boyutları	200×185 mm
Ambalaj boyutları	520×520×280 mm
Net ağırlık	10 kg
Brüt ağırlık	13,5 kg
IP Sınıfı	IP 43
Haberleşme arayüzü	2×RS232, USB-A, USB-B, Ethernet, 4 IN / 4 OUT (dijital), Wi-Fi^®
Güç kaynağı	Adapter: 100 – 240V AC 50/60Hz 0,6A; 12V DC 1,2A Teraziler: 10 – 12V DC 1A max
Çalıştırma sıcaklığı	+10 – +40 °C

C32.10.PM Hassas Terazi

PM Balances by RADWAG

New technology

PM balances also include:

Application

Labelling

Plus/Minus Control

Percent Weighing

Totalizing

Parts counting

Statistics

IR sensors

Under-pan weighing

GLP Procedures

Animal weighing

Density determination

Replaceable unit

ALIBI Memory

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Newsletter

Bir dil seçin