C315.4P.600/1500.C Palet Terazisi

Deutsch English Español Français Italiano Polski Türkiye Česky USA

Ana Sayfa > Ürün > Endüstriyel teraziler > Palet ve kızak terazileri > Palet terazileri > C315.4P.600/1500.C Palet Terazisi

This image is for reference only.

C315.4P.600/1500.C Palet Terazisi

Ürün kodu: WP-239-1001

Modeli değiştirin (5)

done

Max: 600 / 1500kgd: 200 / 500g

⤢

840×1200mm

expand_more

C315.4P 600.C Palet Terazisi

Max: 600kgd: 200g

⤢

840×1200mm

C315.4P.1500.C Palet Terazisi

Max: 1500kgd: 500g

⤢

840×1200mm

C315.4P.1500/3000.C Palet Terazisi

Max: 1500 / 3000kgd: 500 / 1000g

⤢

840×1200mm

C315.4P.3000.C Palet Terazisi

Max: 3000kgd: 1000g

⤢

840×1200mm

Maksimum yük [Max]: 600 / 1500 kg
Okuma doğruluğu [d]: 200 / 500 g

Modeli değiştirin:

✓ C315.4P 600.C Palet Terazisi

✓ C315.4P.600/1500.C Palet Terazisi

✓ C315.4P.1500.C Palet Terazisi

✓ C315.4P.1500/3000.C Palet Terazisi

✓ C315.4P.3000.C Palet Terazisi

Select all

Bakış

İndirme

Request a quote

Karşılaştırmak için ürün ekleyin Advanced Search

Genel Açıklama

Palet terazisi, denenmiş 4 yük hücreli kararlı yapısı ile palet tartımı için tasarlanmıştır. Tartılacak yük standart fork-lift ile platform üzerine yerleştirilebilir. C315.4P serisi, yumuşak çelikten toz boyalı olarak imal edilir. C315.4P serisi, terazinin kullanılacağı yere kolayca taşınmasını sağlamak için tekerleklere ve tutamaçlara sahiptir. Terazi, standart olarak, arkadan aydınlatmalı LCD göstergesi ve fonksiyon düğmeleri olan PUE C315 serisi indikatör ile sunulur. İndikatörün uzun bir kablosu vardır. Terazi şebekeden beslenir ve RS232 ara birimi standart olarak verilir. Kantarın, ilave ücret karşılığı çift kademeli versiyonu mevcuttur.

Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications

Teknik Veriler

Maksimum yük [Max]	600 / 1500 kg
Minimum yük [Min]	4 kg
Okuma içinğruluğu [d]	200 / 500 g
Yasallaştırma birimi [e]	200 / 500 g
Dara aralığı	-1500 kg
OIML sınıfı	III
Display	LCD (aydınlatma ile)
Kablo uzunluğu	3 m
Tartım kefesi boyutları	840×1200 mm
Cihaz boyutları	1322×840×85 mm
Ambalaj boyutları	1400×900×430 mm
Göstergeli terazi kütlesi	43 kg
IP Sınıfı	IP 65 konstrüksiyon, IP 67 gerinim ölçer, IP 43 terminal
Haberleşme arayüzü	RS232
Opsiyonel arayüzler	RS232
Güç kaynağı	100 – 240 V AC 50/60 Hz + batarya
Maksimum güç tüketimi	5 W
Batarya ile çalışma süresi	max 8h
Çalıştırma sıcaklığı	-10 – +40 °C
Atmosferik nem	10% – 85% RH yoğunlaşma yok

Additional fee
for verification

Fonksiyonlar

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Dokümantasyon

Data Sheet

Bakış

İndirme

Choose more product:
Bakış

Bakış

İndirme

User Manual - CBCP 01

Bakış

İndirme

(0.30 MB)

Start up Guide

Bakış