Ana Sayfa > Ürün > ATEX sertifikalı teraziler

ATEX sertifikalı teraziler

Hazardous area scales Hi-tech weighing equipment intended to precisely measure mass of loads in hazardous areas endangered with explosion, classified as zones 1, 21 and 2, 22. The ATEX certificate is a guarantee for equipment compliance with the highest safety standards, whereas the mechanical design prevents initiation of explosive mixtures ignition.

Gaz patlama tehlikesi olan tehlikeli saha

Gaz ve toz patlama tehlikesi olan tehlikeli saha

PUE HX5.EX Indicator

Intrinsically safe power supply intended for EX scale

Communication modules

Daha fazla bilgi » keyboard_arrow_down

Measurement of mass in areas endangered with explosion requires use of a professional device ensuring weighing accuracy and precision but most of all operation safety. RADWAG manufactures reliable instruments to-be-operated in hazardous areas where there is a risk of explosion of gases,, and in hazardous areas endangered with explosion of gases and dusts. Each of these two groups comprises widely applied 1-load-cell scales, and 4-load-cell scales with large-size platforms.

RADWAG EX scales are controlled via a modern weighing terminal, the PUE HX5.EX, certified with ATEX approval. The device is intended to be a component of industrial load-cell scales that can be operated in production areas endangered with explosion, classified as zones 1, 21, 2, 22.

The PUE HX5.EX terminal must be powered using a certified intrinsically safe PM01 power supply manufactured by RADWAG. Depending on the needs, the PM01.EX can be connected to the voltage source placed either in hazardous or safe area. RADWAG product range includes a communication module, the IM01.EX, with use of which it is possible to expand the quantity of terminal’s communication interfaces. The module is installed outside the hazardous area, and connected to the indicator using an intrinsically safe interface.

Classification of hazardous areas and explosion probability » keyboard_arrow_down

RADWAG product range offers weighing instruments intended for operation in hazardous areas classified as zones 1, 2, 21 and 22. The equipment meets the highest safety standards. Its mechanical design prevents initiation of explosive mixtures ignition. The user may choose from various weighing platforms offered in wide range of dimensions and maximum capacities. This combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements.

The classification of hazardous areas is included in Annex I of the Directive 1999/92/EC ATEX137 of 16 December 1999, ‘On minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres’.

The table presents classification of hazardous areas and explosion probability.

Explosive atmosphere caused by mixture of air and:	Hazardous areas classification	Explosion probability
gas, liquid and vapours (Zone G)	0	constant explosion risk lasting for a long period of time
	1	occasional explosion risk
	2	no explosion risk during regular work, shall any occur it lasts for a short period of time
flammable dust (Zone D)	20	constant explosion risk lasting for a long period of time
	21	occasional explosion risk
	22	no explosion risk during regular work, shall any occur it lasts for a short period of time

ATEX sertifikalı teraziler

Bir dil seçin