Selected language Türkiye Türkiye
Change language
Change language page on Deutsch DeutschChange language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Italiano ItalianoChange language page on Polski Polski ČeskyChange website to USA USAChange language page on 中文 中文
ÜrünYeni ürünler
Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method.
The table presents the minimum reguirements in accordance with ISO 8655 standard. It also enables to select suitable adapter for pipette calibration and respective balance version.

Selected volumea of apparatus under test
V
Resolution
mg
Repeatability and linearity
mg
Recommended balance
1 µl ≤ V ≤ 10 µl 0.001 0.002 MYA 21.4Y PLUS
MYA 21.4Y
XA 6/21.4Y.M.A PLUS
XA 6/21.4Y.M.A
XA 6/21.4Y.M
10 µl < V ≤ 100 µl 0.01 0.02 XA 82/220.4Y.A PLUS
XA 82/220.4Y.A
XA 82/220.4Y
XA 120/250.4Y.A PLUS
XA 120/250.4Y.A
XA 120/250.4Y
100 µl < V ≤ 1000 µl 0.1 0.2
1 ml < V ≤ 10 ml 0.1 0.2
Adapter for pipette calibration MY 11 XA 11 XA 17 XA 100 XA 17 XA 100
Maximum vessel capacity 11 ml 11 ml 17 ml 100 ml 17 ml 100 ml

a For practical purposes, the nominal volume may be used to choose the balance.

If the standard uncertainty of measurement of the balance is known (e.g. from the balance calibration certificate), it may be used instead of the repeatability and linearity. The standard uncertainty of measurement shall not be more than two to three times the resolution.

Ürün ismi
Genel Açıklama

Radwag Terazileri İleri Tartım Teknolojileri

Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2019 RADWAG Balances and Scales. All rights reserved.

Watch more
RADWAG videos


movie
Radwag WEBINARS