Balança WPY 30/60.C2.R.CPE

✆
Balanças de laboratório
Balanças industriais
Plataformas CPE
Checadoras de peso
Comparadores de massa
Pesagem de filtro
Calibração de micropipetas
Pesagem de stent
Pesos padrão
Mesas de pesagem
Detectores de metais
Módulos de pesagem
Acessórios
Software
Selected language Português (Brasil)
Início > Produtos > Plataformas CPE > Plataformas de controle de produtos embalados - Controle Estatístico > Balanças WPY para CPE > Balança WPY 30/60.C2.R.CPE
Balança WPY 30/60.C2.R.CPE
This image is for reference only.

Balança WPY 30/60.C2.R.CPE

Código do produto: WK-308-1033
Alterar o modelo (13)
done
Balança WPY 30/60.C2.R.CPE
Max: 30 / 60kgd: 10 / 20g

⤢

 400×500mm
expand_more
Balança WPY 0.6/1.5.D2.CPE
Max: 0,6 / 1,5kgd: 0,2 / 0,5g

⤢

 195×195mm
Balança WPY 1,5/3.D2.CPE
Max: 1,5 / 3kgd: 0,5 / 1g

⤢

 195×195mm
Balança WPY 3/6.D2.CPE
Max: 3 / 6kgd: 1 / 2g

⤢

 195×195mm
Balança WPY 3/6.F1.K.CPE
Max: 3 / 6kgd: 1 / 2g

⤢

 300×300mm
Balança WPY 3/6.F1.R.CPE
Max: 3 / 6kgd: 1 / 2g

⤢

 300×300mm
Balança WPY 6/15.F1.K.CPE
Max: 6 / 15kgd: 2 / 5g

⤢

 300×300mm
Balança 6/15.F1.R.CPE
Max: 6 / 15kgd: 2 / 5g

⤢

 300×300mm
Balança WPY 15/30.C2.R.CPE
Max: 15 / 30kgd: 5 / 10g

⤢

 400×500mm
Balança WPY 15/30.F1.K.CPE
Max: 15 / 30kgd: 5 / 10g

⤢

 300×300mm
Balança WPY 15/30.F1.R.CPE
Max: 15 / 30kgd: 5 / 10g

⤢

 300×300mm
Balança WPY 15/30.C2.K.CPE
Max: 15 / 30kgd: 5 / 10g

⤢

 400×500mm
Balança WPY 30/60.C2.K.CPE
Max: 30 / 60kgd: 10 / 20g

⤢

 400×500mm
Capacidade máxima [máx]: 30 / 60 kg
Resolução [d]: 10 / 20 g

close
Wybierz modele:
✓ Balança WPY 0.6/1.5.D2.CPE
✓ Balança WPY 1,5/3.D2.CPE
✓ Balança WPY 3/6.D2.CPE
✓ Balança WPY 3/6.F1.K.CPE
✓ Balança WPY 3/6.F1.R.CPE
✓ Balança WPY 6/15.F1.K.CPE
✓ Balança 6/15.F1.R.CPE
✓ Balança WPY 15/30.C2.R.CPE
✓ Balança WPY 15/30.F1.K.CPE
✓ Balança WPY 15/30.F1.R.CPE
✓ Balança WPY 15/30.C2.K.CPE
✓ Balança WPY 30/60.C2.K.CPE
✓ Balança WPY 30/60.C2.R.CPE
✓ Selecionar tudo
Mostre-me
Baixar
Quero saber mais
Visão geral

Balança WPY para controle estatístico

 
A WPY/CPE é equipada com módulos que implementam o controle de produtos embalados. O sistema baseia-se em um banco de dados que contém listas de produtos e operadores. O controle, iniciado pela balança, é interrompido automaticamente após a verificação de uma quantidade predefinida de embalagens (amostras). O número de embalagens é determinado pela programação da balança, com base no tamanho do lote do produto. As balanças possuem um display gráfico colorido sensível ao toque (touch screen) de 5,7 polegadas para a visualização de informações sobre o controle em andamento e seu resultado.
 
 
 

O ciclo de controle segue o seguinte esquema:

  • seleção do operador,
  • seleção do produto,
  • início do controle,
  • aquisição de registros de pesagem,
  • término automático do controle após um determinado número de embalagens,
  • impressão do relatório de controle.
Cada controle realizado é finalizado com um relatório contendo todas as informações necessárias para o relatório de controle de produtos pré-embalados. O relatório é salvo automaticamente na memória da balança e, simultaneamente, pode ser impresso em uma impressora conectada a ela.
 
 
 
A finalidade da balança é o controle de mercadorias embaladas (PGC), portanto, lembre-se de que a verificação (legalização) é necessária.
Recomendamos encomendar uma balança com a devida verificação (legalização).
 
 
Ficha Técnica
Capacidade máxima [máx]

30 / 60

kg

Carga mínima

200 / 400

g

Resolução [d]

10 / 20

g

Unidade de verificação [e]

10 / 20

g

Faixa de tara

-60

kg

Classe OIML

III

Display

Tela touchscreen colorida resistiva de 5,7"

Dimensões até prato de pesagem

400×500

mm

Dimensões da embalagem L x P x A

720×620×210

mm

Classe de proteção

IP 65 construção, IP 43 terminal

Interface de comunicação

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

Fonte de alimentação

100 – 240 V AC 50/60 Hz

Temperatura de operação

-10 – +40

°C

Umidade relativa

10% – 85% RH sem condensação

CE
2 anos de garantia
Verificação automática de plataformas
Controle de mercadorias embaladas
Vídeos
Complete Solutions for Mass Measurement in Pharma Industry
Funções
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g ± 5 g
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Documentação
Ficha técnica
Data Sheet Data Sheet
Data Sheet

Mostre-me
Mostre-me
Baixar
Baixar

Choose more products:
Mostre-me Mostre-me BaixarBaixar
Manuais do usuário
User Manual - WPY Multifunctional Scale
User Manual - WPY Multifunctional Scale
Mostre-me
Mostre-me
Baixar
Baixar
(1.68 MB)
Software Manual - CBCP 03
Software Manual - CBCP 03
Mostre-me
Mostre-me
Baixar
Baixar
(0.80 MB)
Start up Guide
Start up Guide
Mostre-me
Mostre-me
Baixar
Baixar
(1.26 MB)
Quick start
Quick start
Mostre-me
Mostre-me
Baixar
Baixar
(2.47 MB)
Software Manual - Appendices 01
Software Manual - Appendices 01
Mostre-me
Mostre-me
Baixar
Baixar
(1.66 MB)
Software Manual - PUE 7.1
Software Manual - PUE 7.1
Mostre-me
Mostre-me
Baixar
Baixar
(6.37 MB)
Declaração de conformidade
Conformity Declarations
Conformity Declarations
Mostre-me
Mostre-me
Baixar
Baixar
(0.04 MB)
Publicações e brochuras
RTP Thermal Receipt Printer
RTP Thermal Receipt Printer
Mostre-me
Mostre-me
Baixar
Baixar
(1.64 MB)
Radwag – Advanced Weighing Technologies
Radwag – Advanced Weighing Technologies
Mostre-me
Mostre-me
Baixar
Baixar
(34.92 MB)
THBR System 2.0
THBR System 2.0
Mostre-me
Mostre-me
Baixar
Baixar
(5.17 MB)
Stainless Steel in RADWAG products. Standard and special applications
Stainless Steel in RADWAG products. Standard and special applications
Mostre-me
Mostre-me
Baixar
Baixar
(2.23 MB)
PUE 7.1 Terminal
PUE 7.1 Terminal
Mostre-me
Mostre-me
Baixar
Baixar
(2.33 MB)
Acessórios
R-LAB

Acessórios

Newsletter

Assine a newsletter se quiser receber notícias da RADWAG.

Ver mais
Oferta
Produtos
Novos produtos
Suporte ao cliente
Calibração
Manuais do usuário
Baixar
Serviço
Assistência remota
Catálogos
Publicações
Blog
Registo de produtos
Preencha a solicitação de serviço de RMA
Webinars
Radwag
Empresa
Sistema de qualidade ISO
Certificados de produtos
Prêmios e reconhecimentos
Exposições e Conferências
Contato
Política de privacidade
Balanças e Plataformas Radwag
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2026 Balanças e Plataformas Radwag. Todos os direitos reservados.

Selecione um idioma

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Japanese (日本語) Japanese (日本語)
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Presentations Presentations Presentations
Subscribe Subscribe Subscribe
Radwag in Facebook Radwag in Facebook Facebook
Radwag in YouTube Radwag in YouTube Youtube
Radwag in Vimeo Radwag in Vimeo Vimeo
Radwag in LinkedIn Radwag in LinkedIn LinkedIn
Webinars Radwag Webinars Radwag Webinars
Slide to go back ↩