PM 10.4Y Hassas Terazi

Radwag Balances and Scales - Advanced Weighing Technologies
Selected language Türkiye
PM 10.4Y Hassas Terazi › Pharma and Biotech Solutions
This image is for reference only.

PM 10.4Y Hassas Terazi

Ürün kodu: WL-223-0002
Change the model (8)
done
Max: 10kgd: 0,01g

 200×185mm
expand_more
Max: 15kgd: 0,01g

 200×185mm
Max: 20kgd: 0,01g

 200×185mm
Max: 25kgd: 0,1g

 350×260mm
Max: 35kgd: 0,1g

 350×260mm
Max: 50kgd: 0,1g

 350×260mm
Max: 60kgd: 0,1g

 400×500mm
Max: 120kgd: 0,2g

 400×500mm
Maximum capacity [Max]: 10 kg
Readability [d]: 0,01 g

close
Change the model:
PM 10.4Y Hassas Terazi
PM 15.4Y Hassas Terazi
PM 20.4Y Hassas Terazi
PM 25.4Y Hassas Terazi
PM 35.4Y Hassas Terazi
PM 50.4Y Hassas Terazi
PM 60.4Y Precision Balance
PM 120.4Y Precision Balance
Select all
Bakış
İndirme
Request a quote
Karşılaştırmak için ürün ekleyin Advanced Search
Genel Açıklama
PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions
  • The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability,
  • minimum eccentricity error over the entire range, 
  • quick and stable measurement (achievable within 1 second),
  • parameter stability over time and during transport,
  • weighing pan dimensions adapted to the accuracy of the balance 
are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced

MONO

BLOCK®
technology. The change in the design of the has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions.
PM balances also include:
  • robust design based on a larger and taller ,
  • built-in 4-point overload protection system,
  • IP 54 ingress protection,
  • internal adjustment,
  • touch screen,
  • easy start-up, intuitive operation, and ergonomics,
  • compliance with 21 CFR Part 11.
Under-Pan Weighing
Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook.
 
Application 
PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required.
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications
Teknik Veriler
Maximum capacity [Max]

10

 kg

Minimum load

0,5

 g

Preload range

1

 kg

Readability [d]

0,01

 g

Verification scale interval [e]

0,1

 g

Dara aralığı

-10

 kg

Minimum weight (USP)

8,2

 g

Minimum weight (U=1%,k=2)

0,82

 g

Repeatability (Max)

0,01

 g

Düşük yükte tekrarlanabilirlik

0,004

 g

Doğrusallık

±0,03

 g

Kararlılık süresi

3

 s

Ayarlama

internal (automatic)

 

OIML Class

II

 

Leveling system

semi-automatic - LevelSENSING

 

Display

5,7” Resistiv-Farb-Touchscreen

 

IP Sınıfı

IP 43

 

Weighing pan dimensions

200×185

 mm

Packaging dimensions

520×520×280

 mm

Net weight

10

 kg

Brüt ağırlık

12,2

 kg

Haberleşme arayüzü

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

 

Güç kaynağı

Adapter: 100 – 240V AC 50/60Hz 1A; 15V DC 2,4A
Balance: 12 – 15V DC 1,1A max

 

Çalıştırma sıcaklığı

+10 — +40

 °C

CE
Doğrulama Extra payment
for verification
Özellikler
Electronic
level indicator

Electronic
level indicator

Functions:
  • ALARM function
  • graphic level indicator
  • programmable acceptable tilts
Data exchange through
USB storage devices

Data exchange through
USB storage devices

  • update balance software
  • export weighing data
  • export/import databases
  • export/import balance settings
  • exchange data between balances
Infrared
proximity sensors

Infrared
proximity sensors

Optional functions:
  • PRINT function
  • TARE function
  • sensor's sensitivity adjustment
Videolar
RADWAG Remote Desktop - Windows 10
RADWAG Remote Desktop
360°

Fonksiyonlar
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Dokümantasyon
Data Sheet Data Sheet
Data Sheet

Bakış
Bakış
İndirme
İndirme

Choose more product:
Bakış Bakış İndirmeİndirme
User Manual - PM 4Y
User Manual - PM 4Y
Bakış
Bakış
İndirme
İndirme
(3.76 MB)
Software Manual - Radwag-Mass -Node-RED
Software Manual - Radwag-Mass -Node-RED
Bakış
Bakış
İndirme
İndirme
(0.57 MB)
Start up Guide
Start up Guide
Bakış
Bakış
İndirme
İndirme
(1.92 MB)
Conformity Declaration
Conformity Declaration
Bakış
Bakış
İndirme
İndirme
(0.04 MB)
PM Precision Balances
PM Precision Balances
Bakış
Bakış
İndirme
İndirme
(5.49 MB)
THBR System 2.0
THBR System 2.0
Bakış
Bakış
İndirme
İndirme
(5.17 MB)
Stainless Steel in RADWAG products. Standard and special applications
Stainless Steel in RADWAG products. Standard and special applications
Bakış
Bakış
İndirme
İndirme
(2.44 MB)
Defined Weighing Profiles
Defined Weighing Profiles
Bakış
Bakış
İndirme
İndirme
(1.36 MB)
Aksesuarlar
Fiş yazıcı
Display
Barkod okuyucu
RS 232 cables (scale - printer)

Aksesuarlar

RS 232, RS 485 cables
RS 232 – USB Converter
Güç adaptörü
Protective cover for balances
Under-pan weighing
R-LAB

Aksesuarlar

E2R System
Label Editor R02
RADWAG Development Studio
LabVIEW Driver
RADWAG Remote Desktop
RAD-KEY

Aksesuarlar

R.Barcode

Aksesuarlar

Audit Trail Reader
Antivibrasyon masaları
Etiket Yazıcısı
Radwag Terazileri İleri Tartım Teknolojileri
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2023 RADWAG Balances and Scales. All rights reserved.

Bir dil seçin

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Česky
Change website to USA USA
Change language page on 中文 中文
SubscribeSubscribe
Radwag in FacebookFacebook
Radwag in YouTubeRadwag in YouTubeYoutube
Radwag in VimeoVimeo
Radwag in LinkedInLinkedIn
Webinars RadwagWebinars
close
e-posta:
Firma ismi:
İsminiz:
I consent to the processing of my personal data for marketing purposes by Radwag Wagi Elektroniczne Witold Lewandowski.
I consent to receive marketing and product-related messages by electronic means from Radwag Wagi Elektroniczne Witold Lewandowski.
I have read the Privacy Policy of RADWAG Wagi Elektroniczne Witold Lewandowski.
lock_openI want to access the files
close
Slide to go back ↩