Karşılaştırmak için ürün ekleyin : PS 1000.X2 Hassas Terazi

Selected language Türkiye Türkiye
Change language
Change language page on Deutsch DeutschChange language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Italiano ItalianoChange language page on Polski Polski ČeskyChange website to USA USAChange language page on 中文 中文

PS 1000.X2 Hassas Terazi

PS 1000.X2 Hassas Terazi - PS.X2 serisi, hassas terazilerde yeni ve ileri bir seviyeyi sunar
This image is for reference only.

Ürün kodu: WL-218-0026
Request for quotation

Genel Açıklama

Maximum capacity [Max]: 1000g
Readability [d]: 0,001g

PS.X2 serisi, hassas terazilerde yeni ve ileri bir seviyeyi sunar. X2 serisi teraziler, parmak ucunuzda en yüksek kullanım konforunu sağlayan en son nesil kapasitif displeye sahiptir. İşletim kolaylığı, kolay anlaşılır menü ve kullanışlı olarak düzenlenmiş display her günkü işleriniz için en iyi ergonomiyi garanti eder. Sunulan çok çeşitli arayüzler, iletişim için en uygun çözümün seçimini kolaylaştırır. X2 serisi teraziler, yazma, kopyalama, arşivleme ve veri transferi sağlayan harici cihazlar ile birlikte çalışmada sınırsız imkânlar sunar.
Terazi yapısında bulunan IR sensörler, dara alma, sonuçları yazıcıya gönderme veya belirli bir prosesin ardışıl adımlarını seçme vb. gibi birçok işlemin, teraziye dokunmadan sadece eli sensörün üzerinden geçirerek yapılmasını sağlar. Terazinin gövdesi plastikten ve kefesi paslanmaz çelikten yapılmıştır.
 
X2 serisi terazilerde veri tabanı
PS.X2 serisi terazilerdeki bilişim sistemi, birçok kullanıcının çeşitli ürünleri depolamak için veri tabanı ile çalışmasına imkân veren 7 adet veri tabanına dayanır.

Kaydedilmiş tartım sonuçları ile daha ayrıntılı analizler yapılabilir. Veriler 7 veri tabanına kaydedilir:
• Kullanıcılar  ( 100 kullanıcıya kadar ),
• Ürünler (5 000 ürüne kadar),
• Tartımlar (50 000 tartıma kadar),
• Paketleme (100 paket tipine kadar),
• Formüller (100 formüle kadar),
• Müşteriler (1000 müşteriye kadar),
• ALIBI bellek (512 000 tartıma kadar).
 
X2 serisi, formüller ile ilgili rapor (500 e kadar)  oluşturma seçeneği sunar.
 
ALIBI Bellek
X2 serisi teraziler, ölçümlerin otomatik kaydedilmesini ve güvenliğini garanti eden ALIBI belleğe sahiptir. Verileri ön izleme, kopyalama ve arşivleme gibi opsiyonlar da kullanıcılar için mevcuttur.
 
ALIBI bellek 500 000 tartım sonucunu kaydedebilir.
 
Üst seviyeye taşınan kişiselleştirme
X2, kullanıcıya, displayi tasarlamak için geniş widget seçim olanağı veren pazardaki tek terazidir. X2 serisinin kişiselleştirilmiş display özelliği çalışma sonucunuza ve diğer önemli bilgilere ana ekrandan doğrudan erişmenizi sağlar.
 
Tartım Verileri Yönetimi
USB arayüzü, çalışma sonuçlarınızın kopyasını (ölçümler, raporlar, veri tabanları)  diğer terazilere taşımanızı kolaylaştırır. Tartım verilerinin ağ üzerinden yönetimi, önemli verilerin verimliliğini, üretkenliğini ve güvenliğini maksimum seviyeye çıkarır.
 

Videolar

X2 Balances: STATISTICS - Working modes: part 8
X2 Balances: LIQUIDS DENSITY - Working modes: part 7
X2 Balances: SOLIDS DENSITY - Working modes: part 6
X2 Balances: PERCENT WEIGHING - Working modes: part 5
X2 Balances: PARTS COUNTING - Working modes: part 4
X2 Balances: CHECKWEIGHING - Working modes: part 3
X2 Balances: DOSING - Working modes: part 2
X2 Balances: WEIGHING - Working modes: part 1
X2 Synergy Baances: operating modes overview
X2 Synergy Balances

Fonksiyonlar

Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Replaceable unit

Replaceable unit

Replaceable units.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Mass for titrator

Mass for titrator

'Mass value for a titrator' working mode enables establishing connection between the weighing device and a titrator. The titrator receives information about the quantity of dispensed mass, and the weighing instrument receives a signal to start subsequent weighing.

Teknik Veriler

Maximum capacity [Max]

1000

 g

Minimum load

0,02

 g

Readability [d]

0,001

 g

Dara aralığı

-1

 kg

Repeatability (Max)

0,0015

 g

Düşük yükte tekrarlanabilirlik

0,0005

 g

Doğrusallık

±0,003

 g

Minimum weight (U=1%,k=2)

0,1

 g

Minimum weight (USP)

1

 g

Kararlılık süresi

2

 s

Ayarlama

internal (automatic)

 

Display

5" capacitive colour touchscreen

 

Veri tabanı kapasitesi

7

 

Touch-free operation

2 IR Sensors

 

Haberleşme arayüzü

2×RS232, USB-A, USB-B, Ethernet, Wi-Fi®

 

Güç kaynağı

100 ÷ 240 V AC 50 / 60 Hz

 

Maksimum güç tüketimi

250 mA

 

Çalıştırma sıcaklığı

+10 ÷ +40

 °C

Weighing pan dimensions

128×128

 mm

Packaging dimensions

470×380×336

 mm

Net weight

3,9

 kg

Brüt ağırlık

5,5

 kg

Dokümantasyon

Technical specification
Publications and teaching materials
Manuals
(3.78 MB) EN
Save See the publication
Data Sheet
(2.04 MB) EN
Save See the publication
Conformity Declaration
(0.04 MB) EN
Save See the publication
Defined Weighing Profiles
(1.36 MB) EN
Save See the publication
USB Free Link - Direct Balance-PC Communication
(2.07 MB) EN
Save See the publication
X2 Laboratory Balances
(1.24 MB) EN
Save See the publication
X2 Series Balances
(9.76 MB) EN
Save See the publication

İndirme

Drivers

RADWAG USB DRIVER 1.6.2 (1.25 MB)

Aksesuarlar

Granit antivibrasyon masası
ALIBI Reader

Aksesuarlar

Ürün ismi

Genel Açıklama

Alibi Okuyucu PC Yazılımı

...

E2R System
R.Barcode
R-LAB
RAD-KEY
RADWAG Connect
RADWAG Development Studio
LabVIEW Driver
Kefenin altına asarak tartmak için sehpa
Yoğunluk belirleme kiti
Fiş yazıcı
RS 232 cables (scale - EPSON printer)
RS 232, RS 485 cables
USB kablo (terazi-Epson yazıcı)

Aksesuarlar

Çakmak prizine uygun besleme kabloları
Protective cover for balances
Barkod okuyucu

Aksesuarlar

Ürün ismi

Genel Açıklama

DS2208 Barkod Okuyucu

Yeni nesil LS2208 serisinden olan DS2208 barkod okuyucu, barkodları doğrudan cep telefonlarının ekranlarından ve diğer LCD ekranlardan okumak zorunda olan kasa ...

LS2208 Barkod Tarayıcı

Barcode scanner model Symbol LS2208 is a manual device designed for operation in adverse industrial conditions. Symbol LS2208 is ready to cooperate with RA ...

PD9330 Barkod Tarayıcı

Datalogic ürün serisi şimdi PowerScan ™ 9300 lazer tarayıcı serileriyle genişletildi. Cihaz ...

PD9530 Barkod Tarayıcı

Datalogic PowerScan PD9530, alan görüntüleyici barkodlar için tasarlanmış hızlı ve güvenilir bir tarayıcıdır. Tarayıcı, 1 m'lik mesafeden bile çok yönlü bark ...

PM9300 Barkod Tarayıcı

PowerScan ™ PM9300, PD9300 tarayıcısının kablosuz bir sürümüdür. Cihazın üç tipi vardır: PM9300 - kablosuz model, PM9300-D - ekranlı ve 4 tuşlu ara model ve ...

PM9500 Barkod Tarayıcı

PM 9500, endüstri için tasarlanmış sağlam bir barkod tarayıcıdır. Tarayıcı, mükemmel kablosuz tarama kalitesi sağlayan 'Datalogic STAR Kablosuz' sistemiyle d ...

PM9300-D Barkod Tarayıcı

PowerScan ™ PM9300, PD9300 tarayıcısının kablosuz bir sürümüdür. Cihazın üç tipi vardır: PM9300 - kablosuz model, PM9300-D - ekranlı ve 4 tuşlu ara model ve ...

PD9330-AR Barkod Tarayıcı

The Datalogic product range is now extended by series of PowerScan™ 9300 laser scanners. The device combines excellent functionality of PowerScan series with ne ...

PM9300-DK Barkod Tarayıcı

PowerScan ™ PM9300, PD9300 tarayıcısının kablosuz bir sürümüdür. Cihazın üç tipi vardır: PM9300 - kablosuz model, PM9300-D - ekranlı ve 4 tuşlu ara model ve ...

Draft Shield
128×128mm kefeli teraziler için rüzgârlık
Hassa terazi muhafaza çantası
Display
Güç adaptörü

Radwag Terazileri İleri Tartım Teknolojileri

Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag
© 2019 RADWAG Balances and Scales. All rights reserved.

Watch more
RADWAG videos

movie
Radwag WEBINARS