PS 1000.3Y Hassas Terazi

Hassas terazi PS 3Y serisi, denge çalışmasına ve ölçüm sonucunun sunulmasına yeni bir yaklaşım sağlayan 5,7 ”TFT renkli dokunmatik ekrana sahiptir. Denge, ayarlarının kullanıcı profilleri aracılığıyla son derece gelişmiş özelleştirilmesini sağlar.

AS.3Y serisi, içerisindeki standart kütleyi kullanan dâhili otomatik ayar sistemine sahiptir. Terazinin dengesi, elektronik seviye ihtiva eden RADWAG’ın patentli sistemi LevelSENSIG ile izlenir. AS.3Y analitik terazi serisinin yeni bir özelliği, dâhili sensörleri veya THB 2 harici çevre koşulları modülü ile çevre şartlarının anında izlenebilir olmasıdır.

Yeni eklenen fark tartım modu, zaman içinde farklı işlemlere tabi tutulan test edilmiş yükün kütlesini kontrol etmeyi sağlar.

3Y serisi terazilerin genişletilmiş veri tabanları, elde edilen tüm ölçüm kayıtlarının saklanmasına olanak sağlıyor, ek olarak verilerin çıktılarının alınması ve dışarıya aktarılmasını mümkün kılıyor. Herhangi bir kuruluş tarafından gerekli olan GLP/GMP dokümanları, standart çıktı veya kullanıcı tanımlı, tamamen düzenlenebilir şablonlar olarak oluşturulmaktadır.
3Y serisi, PA-04 / H serisi otomatik tablet besleyici ile sağlanan bağımsız kütle kontrol moduna sahiptir.

Terazi koruyucu kılıfı standart olarak sunulmaktadır.

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

Maximum capacity [Max]	1000 g
Minimum load	20 mg
Readability [d]	0,001 g
Dara aralığı	-1000 g
Repeatability (Max)	0,0015 g
Düşük yükte tekrarlanabilirlik	0,0005 g
Doğrusallık	±0,003 g
Minimum weight (U=1%,k=2)	0,1 g
Minimum weight (USP)	1 g
Kararlılık süresi	2 s
Ayarlama	internal (automatic)
Display	5,7” resistive colour touchscreen
Haberleşme arayüzü	2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi^®
Güç kaynağı	100 ÷ 240 V AC 50 / 60 Hz
Maksimum güç tüketimi	10 W
Çalıştırma sıcaklığı	+10 ÷ +40 °C
Weighing pan dimensions	128×128 mm
Packaging dimensions	716×360×260 mm
Net weight	5,7 kg
Brüt ağırlık	8,3 kg

PS 1000.3Y Hassas Terazi

Electroniclevel indicator

Data exchange throughUSB storage devices

Infraredproximity sensors

Portability

Interfaces

Autotest

Dosing

Percent Weighing

Parts counting

Formulation

Statistics

Checkweighing

IR sensors

Under-pan weighing

GLP Procedures

Animal weighing

Density determination

Differential weighing

Statistical Quality Control

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Radwag Terazileri İleri Tartım Teknolojileri

Electronic
level indicator

Data exchange through
USB storage devices

Infrared
proximity sensors