Türkiye

Ürün Yeni Ürünler Servisler Destek Haberler Firma İletişim

‹‹ Ürün Yeni ürünler Firma

Ana Sayfa > Ürün > Laboratory balances > Hassas Teraziler > PM C32 Precision Balances > PM 25.C32 Hassas Terazi

PM 25.C32 Hassas Terazi

This image is for reference only.

Ürün kodu: WL-223-0025

Doğrulama - Yasal metroloji kapsamında yöntem. Yeni bir ürün pazara tanıtılmadan önce bölgesel ölçme ofisi veya yetkili kuruluşlar tarafından yapılır. Bu yöntem

Request for quotation

Fonksiyonlar

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Replaceable unit

Replaceable units.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

PM serisi teraziler, RADWAG MonoBLOCK^® teknolojisine dayanan yenilikçi ölçme sistemi ile donatılmıştır. Bu özellik, 60kg kapasitede 0,5 g okunabilirlik ile çalışabilmeyi sağlar. RADWAG patentinin konusu olan yeni ölçüm sisteminin kullanılması, uzun çalışmada sd<1d aralığında tekrarlanabilirlik kararlılığını garanti eder. Bu eşsiz ölçüm sistemi çözümü, ortam koşullarındaki değişime karşı büyük bir direnç gösterme özelliği ile karakterize edilir. İçinde var olan 4 nokta koruma sistemi, terazinin aşırı yüklenmesini önler. Bu özellik çok ağır bir yükün terazi kefesine konması durumunda güvenlik sağlar. Genel özellikler: · Yeni RADWAG MonoBlock sensor, · Eşsiz gösterge değeri tekrarlanabilirliği, · Ağır yüklerin maksimum doğrulukla tartımı, · Membran tuş takımı ile garanti edilen sezgisel kullanım, · Hızlı kütle ölçümleri, · Dayanıklı mekanik tasarım- yeni, daha alçak tartım platformu, · Geliştirilmiş ergonomi –seçim için iki tip tartım terminali Terazi, tartım platformunun dışında ( kefe altı tartım olarak adlandırılan) yüklerin tartımı imkânını sunar. Bu özellik, standart boyut ve şekillerde olmayan veya manyetik alan oluşturan yüklerin tartılması için bir alternatiftir.

Maximum capacity [Max]	25 kg
Minimum load	5 g
Preload range	3,5 kg
Readability [d]	0,1 g
Dara aralığı	-25 kg
Düşük yükte tekrarlanabilirlik	0,04 g
Repeatability (Max)	0,1 g
Doğrusallık	±0,3 g
Minimum weight (U=1%,k=2)	8,2 g
Minimum weight (USP)	82 g
Kararlılık süresi	3 s
Ayarlama	internal (automatic)
Display	5" graphic colour
Haberleşme arayüzü	2×RS232, USB-A, USB-B, Ethernet, Wi-Fi^®, 4 IN / 4 OUT (Print, Tare)
Güç kaynağı	100 ÷ 240 V AC 50 / 60 Hz
Maksimum güç tüketimi	0,5 A
Çalıştırma sıcaklığı	+10 ÷ +40 °C
Weighing pan dimensions	350×260 mm
Packaging dimensions	520×520×280 mm
Net weight	11 kg
Brüt ağırlık	13,2 kg

Technical specification

Publications and teaching materials

User Manual
(2.28 MB) EN

Data Sheet
(1.04 MB) EN

Conformity Declaration
(0.04 MB) EN

PM - High Capacity Precision Balances
(0.73 MB) EN

PM 25.C32 Hassas Terazi

Labelling

Plus/Minus Control

Percent Weighing

Parts counting

Statistics

IR sensors

Under-pan weighing

GLP Procedures

Replaceable unit

ALIBI Memory

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Aksesuarlar

Radwag Terazileri İleri Tartım Teknolojileri