Karşılaştırmak için ürün ekleyin : AS 220.3Y Analitik Terazi

Selected language Türkiye Türkiye
Change language
Change language page on Deutsch DeutschChange language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Italiano ItalianoChange language page on Polski Polski ČeskyChange website to USA USAChange language page on 中文 中文

AS 220.3Y Analitik Terazi

AS 220.3Y Analitik Terazi - Tasarımı, tartım işlemi ve ölçüm sonuçlarının sunumu kapsamında yeni imkânlar sunar. Terazi, ileri düzeyde geliştirilmiş ayar imkânlarını, kullanıcı tanımları üzerinden olanaklı kılar
This image is for reference only.

Ürün kodu: WL-104-0042
Request for quotation

Genel Açıklama

Maximum capacity [Max]: 220g
Readability [d]: 0,1mg


AS.3Y Analitik teraziler, renkli, 5,7” TFT dokunmatik göstergeye sahiptir. Tasarımı, tartım işlemi ve ölçüm sonuçlarının sunumu kapsamında yeni imkânlar sunar. Terazi, ileri düzeyde geliştirilmiş ayar imkânlarını, kullanıcı tanımları üzerinden olanaklı kılar.

AS.3Y serisi, içerisindeki standart kütleyi kullanan dâhili otomatik ayar sistemine sahiptir. Terazinin dengesi, elektronik seviye ihtiva eden RADWAG’ın patentli sistemi LevelSENSIG ile izlenir. AS.3Y analitik terazi serisinin yeni bir özelliği, dâhili sensörleri veya THB 2 harici çevre koşulları modülü ile çevre şartlarının anında izlenebilir olmasıdır.

AS.3Y analitik teraziler, çevre koşullarının etkisine karşı hava akımına karşı korumalı, büyük tartım kabinine sahiptir. Hava akımına karşı koruma aynı zamanda tartım kabininin içinin temiz ve steril kalmasını sağlar.

AS.3Y serisinin, terazinin veri tabanından alınan verilere dayanan etkileşimli formül yapma modu, formül yapımında hızı ve güvenilirliği garanti eder. Farksal tartım modu, aynı numunenin zaman içinde farklı süreçler geçiren kütle kontrol sürecini kolaylaştırır. Genişletilmiş veri tabanı, kullanıcının, elde edilen bütün ölçümlerin kayıtlarını tutmasını sağlar. İlave olarak çıktı almayı ve verilerin transferini mümkün kılar. Kullanıcı, standart ve isteğe göre çıktı formatları sayesinde, GLP/GMP yöntemlerinin gereklerine uygun herhangi bir süreci pratik olarak tasarlayıp dokümante edebilir. Terazi, PA-04/H otomatik tablet besleyici ile birlikte çalışan bir bağımsız kütle kontrol modu içerir.

Videolar

RADWAG Remote Desktop - Windows 10
RADWAG Remote Desktop

Özellikler

Electronic
level indicator
Functions:
  • ALARM function
  • graphic level indicator
  • programmable acceptable tilts

Electronic
level indicator

Functions:
  • ALARM function
  • graphic level indicator
  • programmable acceptable tilts
Data exchange through
USB storage devices
  • update balance software
  • export weighing data
  • export/import databases
  • export/import balance settings
  • exchange data between balances

Data exchange through
USB storage devices

  • update balance software
  • export weighing data
  • export/import databases
  • export/import balance settings
  • exchange data between balances
Infrared
proximity sensors
Optional functions:
  • PRINT function
  • TARE function
  • sensor's sensitivity adjustment

Infrared
proximity sensors

Optional functions:
  • PRINT function
  • TARE function
  • sensor's sensitivity adjustment
Portability
Extra option:
Balances with
a wireless terminal

Portability

Application:

Elimination of extra sources of vibration
Using wireless terminal facilitates elimination of additional vibrations resulting from daily operation on a balance. Owing to that, balances with highest resolutions might be used without the need of dedicated weighing workstations.

Convenience and comfort of weighing in fume cupboards and laminar flow cabins
Wireless communication between a terminal and a weighing module makes balance operation more comfortable and safer.

Balance isolation form influence of environmental conditions
Wireless communication allows to either place the weighing module inside a draft shield or to isolate it from the operator. This allows to weight toxic substances without putting operator's health or life at risk.
Interfaces
  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n

Interfaces

  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n

Fonksiyonlar

Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.

Teknik Veriler

Maximum capacity [Max]

220

 g

Minimum load

10

 mg

Readability [d]

0,1

 mg

Dara aralığı

-220

 g

Repeatability (Max)

0,1

 mg

Düşük yükte tekrarlanabilirlik

0,08

 mg

Doğrusallık

±0,2

 mg

Minimum weight (U=1%,k=2)

16

 mg

Minimum weight (USP)

160

 mg

Kararlılık süresi

3,5

 s

Ayarlama

internal (automatic)

 

OIML Class

I

 

Display

5,7” resistive colour touchscreen

 

Haberleşme arayüzü

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

 

Güç kaynağı

100 ÷ 240 V AC 50 / 60 Hz

 

Maksimum güç tüketimi

7 W

 

Çalıştırma sıcaklığı

+10 ÷ +40

 °C

Weighing pan dimensions

ø100

 mm

Packaging dimensions

600×400×540

 mm

Net weight

6,2

 kg

Brüt ağırlık

11

 kg

Dokümantasyon

Technical specification
Publications and teaching materials
User Manual
(4.17 MB)
Save See the publication
Data Sheet
(0.18 MB)
Save See the publication
Data Sheet
(1.47 MB)
Save See the publication
Conformity Declaration
(0.04 MB)
Save See the publication
Defined Weighing Profiles
(1.36 MB)
Save See the publication
THBR System 2.0
(5.17 MB)
Save See the publication
Automatic Feeder
(2.75 MB)
Save See the publication
Principles_of_metrology
(0.10 MB)
Save See the publication
SQC in laboratory
(2.31 MB)
Save See the publication

Aksesuarlar

Granit antivibrasyon masası
Antivibration tables for laboratory balances
Professional weighing table
Audit Trail Reader
E2R System
Label Editor R02
3Y Database Editor
Parameter Editor
R.Barcode
R-LAB
RAD-KEY
RADWAG Connect
RADWAG Development Studio
RADWAG Remote Desktop
LabVIEW Driver
Kefenin altına asarak tartmak için sehpa
Yoğunluk belirleme kiti
Fiş yazıcı
Etiket Yazıcısı
Antistatik iyonizer
THBR 2.0 System - Ambient Conditions Monitoring
RS 232 cables (scale - EPSON printer)
RS 232, RS 485 cables
Çakmak prizine uygun besleme kabloları
Automatic feeders
Barkod okuyucu

Aksesuarlar

Ürün ismi

Genel Açıklama

DS2208 Barkod Okuyucu

Yeni nesil LS2208 serisinden olan DS2208 barkod okuyucu, barkodları doğrudan cep telefonlarının ekranlarından ve diğer LCD ekranlardan okumak zorunda olan kasa ...

LS2208 Barkod Tarayıcı

Barcode scanner model Symbol LS2208 is a manual device designed for operation in adverse industrial conditions. Symbol LS2208 is ready to cooperate with RA ...

PD9330 Barkod Tarayıcı

Datalogic ürün serisi şimdi PowerScan ™ 9300 lazer tarayıcı serileriyle genişletildi. Cihaz ...

PD9530 Barkod Tarayıcı

Datalogic PowerScan PD9530, alan görüntüleyici barkodlar için tasarlanmış hızlı ve güvenilir bir tarayıcıdır. Tarayıcı, 1 m'lik mesafeden bile çok yönlü bark ...

PM9300 Barkod Tarayıcı

PowerScan ™ PM9300, PD9300 tarayıcısının kablosuz bir sürümüdür. Cihazın üç tipi vardır: PM9300 - kablosuz model, PM9300-D - ekranlı ve 4 tuşlu ara model ve ...

PM9500 Barkod Tarayıcı

PM 9500, endüstri için tasarlanmış sağlam bir barkod tarayıcıdır. Tarayıcı, mükemmel kablosuz tarama kalitesi sağlayan 'Datalogic STAR Kablosuz' sistemiyle d ...

PM9300-D Barkod Tarayıcı

PowerScan ™ PM9300, PD9300 tarayıcısının kablosuz bir sürümüdür. Cihazın üç tipi vardır: PM9300 - kablosuz model, PM9300-D - ekranlı ve 4 tuşlu ara model ve ...

PD9330-AR Barkod Tarayıcı

The Datalogic product range is now extended by series of PowerScan™ 9300 laser scanners. The device combines excellent functionality of PowerScan series with ne ...

PM9300-DK Barkod Tarayıcı

PowerScan ™ PM9300, PD9300 tarayıcısının kablosuz bir sürümüdür. Cihazın üç tipi vardır: PM9300 - kablosuz model, PM9300-D - ekranlı ve 4 tuşlu ara model ve ...

Holders for laboratory flasks
Holders for test tubes and filters
Display
Güç adaptörü

Ek modüller

Radwag Terazileri İleri Tartım Teknolojileri

Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2019 RADWAG Balances and Scales. All rights reserved.

Watch more
RADWAG videos


movie
Radwag WEBINARS