aggiungere a confrontare : XA 520.4Y Analytical Balance

Selected language Italiano Italiano
Change language
Change language page on Deutsch DeutschChange language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Polski PolskiChange language page on Türkiye Türkiye ČeskyChange website to USA USAChange language page on 中文 中文

XA 520.4Y Analytical Balance

XA 520.4Y Analytical Balance - RADWAG Balance Electronic è un produttore di moderne bilance elettroniche e accessori per l'industria.
This image is for reference only.

Codice prodotto: WL-107-0159
Richiesta di offerta

caratteristiche generali

Capacita massima  [Max]: 520g
Divisione: 0,1mg

Innovative 2-point adjustment system
Brand new adjustment system guarantees the highest measurement accuracy. It minimizes linearity errors simultaneously providing reliable indications for the whole

weighing

range.

Faster measurement with the new CPU
4Y

balances

feature Dual Core 2 x 1 GHz processor which delivers noticeable performance improvements including faster operation and shorter stabilization time retaining high repeatability values.

16 GB RAM – more data management possibilities
16 GB RAM offers possibility of recording data in a form of complex reports. Time and statistic data diagrams on series of

weighments

are another useful option.

The best possible repeatability and USP regulations conformity
The best

weighing

accuracy and repeatability – with sd ≤ 1d combined with USP regulations conformity (Section 41 and 1251) make 4Y

balances

a new standard for

mass

measurement quality.

Ergonomics and safety
Wireless communication between

balance

terminal and a weighing unit make it possible to comfortably operate 4Y series balances in laminar air flow cabinets and fume cupboards.

Remote control operation
Wireless Connection module offers wireless transfer of data recorded by 4Y

balance

to any portable device powered by iOS or Android systems using special applications intended for data management.

Data safety
Every single 4Y balance features ALIBI memory designed to provide protection and automatic recording of your measurements. Options such as data preview, copying and archiving are also
available to users.

Video

RADWAG Remote Desktop - Windows 10
RADWAG Remote Desktop
4Y Balances: Video-Guidance and an on-screen manuals
4Y Series RADWAG Balances

Caratteristiche

Electronic
level indicator
Functions:
- ALARM function
- graphic level indicator
- programmable acceptable tilts

Electronic
level indicator

Functions:
- ALARM function
- graphic level indicator
- programmable acceptable tilts
Data exchange through
USB storage devices
- update balance software
- export weighing data
- export/import databases
- export/import balance settings
- exchange data between balances

Data exchange through
USB storage devices

- update balance software
- export weighing data
- export/import databases
- export/import balance settings
- exchange data between balances
Infrared
proximity sensors
Optional functions:
- PRINT function
- TARE function
- sensor's sensitivity adjustment

Infrared
proximity sensors

Optional functions:
- PRINT function
- TARE function
- sensor's sensitivity adjustment
Portability
Extra option:
Balances with
a wireless terminal

Portability

Application:

Elimination of extra sources of vibration
Using wireless terminal facilitates elimination of additional vibrations resulting from daily operation on a balance. Owing to that, balances with highest resolutions might be used without the need of dedicated weighing workstations.

Convenience and comfort of weighing in fume cupboards and laminar flow cabins
Wireless communication between a terminal and a weighing module makes balance operation more comfortable and safer.

Balance isolation form influence of environmental conditions
Wireless communication allows to either place the weighing module inside a draft shield or to isolate it from the operator. This allows to weight toxic substances without putting operator's health or life at risk.
Interfaces
- Ethernet
- 2×USB
- 2×RS 232
- 4 in / 4 out
- WiFi 2,4GHz b,g,n

Interfaces

- Ethernet
- 2×USB
- 2×RS 232
- 4 in / 4 out
- WiFi 2,4GHz b,g,n

funzioni

Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

foglio di calcolo

Capacita massima  [Max]

520

 g

pesata minima

10

 mg

Divisione

0,1

 mg

intervallo di tara

-520

 g

Ripetibilità consentita [Max]

0,25

 mg

Ripetibilità consentita [5% massimo]

0,1

 mg

Ripetibilità standard [Max]

0,18

 mg

Ripetibilità standard [5% massimo]

0,07

 mg

linearita

±0,5

 mg

carico decentrato

0,4

 mg

Peso standard minimo (U = 1%, k = 2)

14

 mg

Peso standard minimo (USP)

140

 mg

tempo di stabilizzazione

2,5

 s

Calibrazione

internal (automatic)

 

Classe OIML

I

 

display

5,7” resistive colour touchscreen

 

interfaccia

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

 

Alimentatore

100 ÷ 240 V AC 50 / 60 Hz

 

Massimo assorbimento elettrico

700 mA (wireless terminal - 1A)

 

temperatura di lavoro

+10 ÷ +40

 °C

Umidita atmosferica

40% ÷ 80%

 

dimensioni della camera di pesata

170×200×220

 mm

Dimensioni del piatto di pesata

ø100

 mm

Packaging dimensions

720×385×485

 mm

Peso netto

9,8

 kg

Peso lordo

14,3

 kg

documentazione

specifiche tecniche
Publications and teaching materials
Manuals
(6.07 MB) EN
Save See the publication
Data Sheet
(1.78 MB) EN
Save See the publication
Conformity Declaration
(0.04 MB) EN
Save See the publication
Defined Weighing Profiles
(1.36 MB) EN
Save See the publication
THBR System 2.0
(5.17 MB) EN
Save See the publication
Automatic Feeder
(2.75 MB) EN
Save See the publication
Detection of vibrations at the electronic balances workstation
(2.02 MB) EN
Save See the publication
4Y - Brand New Series of Laboratory Balances
(1.46 MB) EN
Save See the publication
4Y Series Balances
(15.27 MB) EN
Save See the publication
Micro Scale Measurement
(2.74 MB) EN
Save See the publication
Principles_of_metrology
(0.10 MB) EN
Save See the publication
SQC in laboratory
(2.31 MB) EN
Save See the publication

Accessori

Tavoli antivibranti in marmo
tavoli antivibranti per bilance da laboratorio
tavolo di pesata professionale
Pipette automatiche

Accessori

nome prodotto:

caratteristiche generali

Pipetta automatica 100 μl ÷ 1000 μl - RW8-106-20-9

...

"Pipettes" Software PC
stazione di lavoro per calibrazione pipette
Audit Trail Reader

Accessori

nome prodotto:

caratteristiche generali

Audit Trail Reader

Audit Trail Reader ...

Sistema E2R
Editore di etichette R02
Editore parametri
Codice a barre R
R-LAB
RAD-KEY
RADWAG Connect
RADWAG Remote Desktop
Driver LabVIEW
Under-hook weighing rack
Kit determinazione della densita
Stampanti di ricevuta
stampanti per etichette
ionizzatore anti statico
THBR 2.0 - modulo misura parametri ambientali

Accessori

nome prodotto:

caratteristiche generali

Modulo THB P

...

Modulo THB S

...

Cavo seriale RS 232 (connessione bilance - Stampanti EPSON)
Cavo seriale RS 232, RS 485
Alimentatore campioni automatico
lettore di codici a barre
supporti per beute da laboratorio
supporti per provette e filtri
Anti-Draft Chamber for XA 4Y Balances
Display
Alimentatore

Radwag bilance e sistemi di pesatura

Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2019 Radwag bilance e sistemi di pesatura. Diritti riservati

Watch more
RADWAG videos


movie
Radwag WEBINARS