Français

Produits Nouveautés Services Soutien Actualités Sur l'entreprise Contact

Le Site Principal > ... > Balances à haute résolution > Balances à haute résolution HY10.HRP > Balance à haute résolution HY10.1100.HRP

Balance à haute résolution HY10.1100.HRP

This image is for reference only.

Code produit: WP-330-0006

Il symbolise la conformité d’un produit avec les régularisations de l’Union Européenne. Le marquage CE sur le produit présente la conformité d’un produit avec d’autres règlements de sécurité déterminés par les directives du marquage CE.

Poser des questions sur le produit

Fonctions

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Newton unit measurement

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

Replaceable unit

Replaceable units.

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Transactions

Complex weighing mode for registration of weighings that are part of transactions such as sale, purchase and warehouse transfer. You can create a new transaction using the scale. It is possible to pause the transaction or abort it. The function supports warehouse management in an enterprise.

Modules

RDA (RADWAG Data Access)3

Audit Trail3

La série de balances de haute résolution HY10.HRP est une solution idéale pour toutes les branches de l’industrie. Les balances industrielles de haute résolution assurent des hautes précisions de mesures et des répétabilités de résultats même dans des conditions industrielles difficiles. La sécurité de données et l’archivage de résultats du travail sont garantis par les logiciels de terminaux RADWAG.

Capacité maximale [Max]	1100 kg
Capacité minimale [Min]	500 g
Précision de lecture	10 g
Étendue de tare	-1100 kg
Répétabilité	15 g
Linéarité	±30 g
Temps de stabilisation	3 s
Dérive de sensibilité	2 ppm/°C dans la température +10° ÷ +40 °C
Température du travail	+10° ÷ +40°C
Dimension du plateau	1000×800 mm
Alimentation	100 ÷ 240 V AC 50 ÷ 60 Hz
Afficheur	10,1" panoramique en couleurs 1024×600
Degré de protection	IP 66/67 construction, IP 68/69 terminal
Humidité relative d'air	40% ÷ 80%
Ajustage	interne
Masse nette	126 kg
Masse brute	160 kg
Entrées/ sorties	4 entrées / 4 sorties
Ethernet	×1
USB	×2
RS 232	×2
Capacité préliminaire	100 kg

Powtarzalność - jest wyrażona jako odchylenie standardowe z 10-ciu postawień obciążenia
Wilgotność względna powietrza - warunki niekondensujące
Czas stabilizacji - w optymalnych warunkach otoczenia

Documentation technique

Mode d'emploi Terminal HY10
(4.02 MB) FR

Instrukcja oprogramowania
(0.23 MB) FR

Mode d'emploi Platforma HRP
(1.46 MB) FR

Mode d'emploi PROFINET
(0.72 MB) FR

Fiche technique
(1.41 MB) FR

E2R AUDIT TRAIL CFR21 p.11
(0.18 MB) FR

Conformity Declaration
(0.04 MB) FR

Publications et Matériaux Pédagogiques

Terminaux de pesage et balances industrielles
(5.14 MB) FR

Système THBR 2.0
(5.24 MB) FR

HRP - Plate-forme de haute resolucion
(2.66 MB) FR

HY10 - Terminal avance de balance
(0.21 MB) FR

Balance à haute résolution HY10.1100.HRP

balances

Dosing

Labelling

Plus/Minus Control

Percent Weighing

Totalizing

Parts counting

Peak hold

Formulation

Newton unit measurement

Statistics

Checkweighing

GLP Procedures

Animal weighing

Differential weighing

Replaceable unit

Statistical Quality Control

ALIBI Memory

Transactions

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Accessoires

Radwag Balances Électroniques