Balance de précision PM 15.4Y en Balances de laboratoire - Radwag Les Balances Electroniques

Balance de précision PM 15.4Y

Radwag Balances and Scales - Advanced Weighing Technologies
Selected language Français
Balance de précision PM 15.4Y en Balances de laboratoire
This image is for reference only.
Balance de précision PM 15.4Y
Code produit: WL-223-0003
Select model (6)
done
Max: 15kgd: 0,01g

 200×185mm
expand_more
Max: 10kgd: 0,01g

 200×185mm
Max: 35kgd: 0,1g

 350×260mm
Max: 50kgd: 0,1g

 350×260mm
Max: 60kgd: 1g

 400×500mm
Max: 60kgd: 0,5g

 400×500mm
Description
Les balances de la série PM sont équipées du dernier système de mesure innovant basé sur la technologie suivante: RADWAG MonoBLOCK®. Il vous permet de travailler... więcej ››
Capacité maximale [Max]: 15kg
Précision de lecture: 0,01g

close
Select model:
Balance de précision PM 10.4Y
Balance de précision PM 15.4Y
Balance de précision PM 35.4Y
Balance de précision PM 50.4Y
Balance de précision PM 60.1.4Y
Balance de précision PM 60.05.4Y
Select all
Voir
Download
Demandez un devis
Description
Les balances de la série PM sont équipées du dernier système de mesure innovant basé sur la technologie suivante: RADWAG MonoBLOCK®. Il vous permet de travailler avec une précision de 0,01 g avec une capacité de charge de 15 kg, et une précision de 0,1 g avec une capacité de charge de 50 kg.
L'utilisation d'un nouveau système de mesure, objet du brevet RADWAG, garantit la stabilité de la répétabilité dans le temps au niveau de sd <0,004g. La solution unique du système de mesure se caractérise par une très haute résistance aux changements des conditions environnementales.
Le système intégré de protection contre les surcharges à 4 points assure la sécurité de la balance en cas de charges excessives.
Principales caractéristiques des nouvelles balances PM:
  • Nouveau capteur de pesage RADWAG MonoBLOCK®;
  • Répétabilité inégalée des résultats;
  • Pesage grandes masses avec la meilleure précision;
  • Fonctionnement intuitif à l'aide de l'écran tactile;
  • Conformité à la norme CFR21;
  • Mesures de masse rapides;
  • Structure solide de la balance - nouvelle plate-forme de pesée inférieure;
  • Amélioration de l'ergonomie de travail - deux types de terminaux de pesage au choix.
Les balances peuvent être pesées charges à l'extérieur du pont-bascule (le soi-disant sous pesée au crochet) - la charge est suspendue sous la balance. C'est une alternative aux charges aux dimensions et aux formes non standard et à celles générant un champ magnétique.
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Acier inoxydable dans les balances RADWAG
Paramètres Techniques
Capacité maximale [Max]

15

 kg

Capacité minimale [Min]

0,5

 g

Capacité préliminaire

1,5

 kg

Précision de lecture

0,01

 g

Étendue de tare

-15

 kg

Pesée minimale USP

8,2

 g

Pesée minimale (U=1%, k=2)

0,82

 g

Répétabilité (Max)

0,015

 g

Répétabilité (5% Max)

0,004

 g

Linéarité

±0,03

 g

Temps de stabilisation

3

 s

Ajustage

interne (automatique)

 

Système de nivellement

semi-automatique - LevelSENSING

 

Afficheur

5,7” résistant couleurs tactile

 

Dimension du plateau

200×185

 mm

Dimensions de colis

520×520×280

 mm

Masse nette

10

 kg

Masse brute

12,2

 kg

Degré de protection

IP 43

 

Communication interface

2×RS232, 2×USB-A, Ethernet, Wi-Fi®

 

Alimentation

100 — 240 V AC 50/60 Hz

 

Prise de courant maximale

0,5 A

 

Température du travail

+10 — +40

 °C

Répétabilité exprimée comme un écart standardisé de 10 placements de chargé.
Temps de stabilisation dépend de conditions externes et de la dynamique du placement d’un poids sur le plateau; déterminé pour le profil FAST.
Caractéristiques
La courbe de niveau électronique

La courbe de niveau électronique

Les possibilités fonctionnelles :
- la fonction ALARM
- l’indicateur graphique de niveau
- les tolérances programmables
Data exchange through
USB storage devices

Data exchange through
USB storage devices

- update balance software
- export weighing data
- export/import databases
- export/import balance settings
- exchange data between balances
Senseurs d’infrarouge

Senseurs d’infrarouge

Les possibilités fonctionnelles :
- la fonction PRINT
- la fonction TARA
- le régalage de la sensibilité des senseurs
Films
RADWAG Remote Desktop - Windows 10
RADWAG Remote Desktop
360°

Fonctions
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Documentation
Cartes de produits
Data Sheet


Voir

Download

Choose more product:
Voir Download
Modes d'emploi
Mode d'emploi - PM 4Y

Voir

Download
(3.74 MB)
Software Manual - Radwag-Mass -Node-RED

Voir

Download
(0.57 MB)
Start up Guide

Voir

Download
(3.57 MB)
Déclarations de conformité
Conformity Declaration

Voir

Download
(0.04 MB)
Publications et brochures
Systeme THBR 2.0

Voir

Download
(5.24 MB)
PM - Balances de Precision a Hautes Capacites

Voir

Download
(3.23 MB)
Acier inoxydable dans les balances RADWAG

Voir

Download
(2.46 MB)
Profils Definis de Pesage

Voir

Download
(1.63 MB)
Accessoires
Tables antivibratoires pour balances de laboratoire
Audit Trail Reader
E2R System
Éditeur D’étiquettes R02
R.Barcode

Accessoires

R-LAB

Accessoires

RAD KEY

Accessoires

RADWAG Connect

Accessoires

RADWAG Studio du Développement
RADWAG Remote Desktop
Pilote LabVIEW
Imprimante de tickets de caisse
Imprimantes d étiquettes
Écran de protection anti-poussière
Concentrateurs USB

Accessoires

Convertisseur RS 232 – USB
Sorties de boucle de courant AP2-1
Câbles RS 232 (balance – imprimante EPSON)

Accessoires

Câbles RS 232, RS 485
Lecteurs de code-barres
Afficheurs
Alimentateurs
Modules
Module de conformité à 21 CFR partie 113
Radwag Balances Électroniques
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2022 RADWAG Balances Électroniques. Tous les droits sont réservés.

Wybierz język

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Español Español
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Subscribe
Facebook
Youtube
Vimeo
LinkedIn
Webinars
close
close
Voulez-vous nous demander quelque chose?
Appelez-nous: +48 48 386 60 00
Nous répondrons à toutes vos questions.