Balanza analíticas XA 110.4Y.F en Balanzas de laboratorio - Radwag Balanzas Electrónicas

Balanza analíticas XA 110.4Y.F

Radwag Balances and Scales - Advanced Weighing Technologies
Selected language Español
Balanza analíticas XA 110.4Y.F en Balanzas de laboratorio
This image is for reference only.
Balanza analíticas XA 110.4Y.F
Código de producto: WL-107-0089
Select model (2)
done
Max: 110gd: 0,01mg

 210×254 mm para filtros + ø90 mm de calado + ø85 mm llena (opción)
expand_more
Max: 52gd: 0,01mg

 210×254 mm para filtros + ø90 mm de calado + ø85 mm llena (opción)
Descripción
Las balanzas analíticas XA 4Y.F están equipadas de la pantalla táctil de colores LCD 5,7". Este facto facilita nuevas posibilidades respecto el manejo y... más ››
Maxima capacidad: 110g
Legibilidad [d]: 0,01mg

close
Select model:
Balanza analítica XA 52.4Y.F
Balanza analíticas XA 110.4Y.F
Select all
ver
Guardar
Solicitar una oferta
Descripción
Las balanzas analíticas XA 4Y.F están equipadas de la pantalla táctil de colores LCD 5,7". Este facto facilita nuevas posibilidades respecto el manejo y visualización de resultados. Pérfiles de usuarios premiten personalizar la balanza. Como estándar las balanzas XA 4Y.A cuentan con el sistema de calibración automática con la masa interna.

El control del nivel se realiza con el uso del sistema electrónico LevelSENSING, patentado por RADAWG. Entre las soluciones más avanzadas de estas balanza destaca la posibilidad de supervisón online de las condiciones ambientales gracias al uso de sensores internos y el sensor externo – módulo THB 2.0.
 
La construcción de la cámara de pesaje permite desarmar los vidrios y a su vez mantener limpieza y esterilidad de los componentes. La función interáctiva de Recetas permite crear diferentes mezclaz de productos con el uso de bases de datos y de manera rápida e infalible. Pesaje diferencial facilita el control de masa de una muestra sometida a diferentes procesos en el tiempo. Extendidas bases de datos permiten registrar todas mediciones y también imprimir y exportarlas. La nueva función de calibración de pipetas aplicada con el uso de un adaptador especial hace de la balanza un dispositivo muy ergonómico que permite calibrar y verificar pipetas de pistón con el método gravimétrico.

Gracias al uso de impresiones estándares y modificables por el usuario, existe la posibilidad de preparar documentación requerida por GLP/GMP prácticament en cualquier campo.

Perfiles definidos
Cuatro conjuntos predefinidos de ajustes de la balanza ajustan automáticamente los parámetros de la balanza a las necesidades y preferencias del usuario.
  • RÁPIDO - obtendremos la medida en muy poco tiempo,
  • DOSIFICACIÓN RÁPIDA: la balanza entrará en un modo de reacción muy rápido para el cambio de masa, especialmente útil cuando se dosifica o agrega otra masa a la porción medida.
  • PRECISIÓN: la configuración de la balanza se centró en la desviación estándar mínima sd ≤ 1,5 μg,
  • USER - permite al usuario definir parámetros de balanza individuales.
Stainless Steel in RADWAG products
Learn about the use and maintenance of stainless steel products:
Stainless Steel in RADWAG products. Standard and special applications
Datos tecnicos
Maxima capacidad

110

 g

Minima cacacidad

1

 mg

Legibilidad [d]

0,01

 mg

Rango de tara

-110

 mg

División de legalización [e]

1

 mg

Repetibilidad estándar [5% Máx.]

0,007

 

Repetibilidad estándar [Máx.]

0,02

 

Porción mínima estándar (USP)

14

 mg

Porción mínima estándar (U = 1%, k = 2)

1,4

 mg

Repetibilidad permitida [5% Máx.]

0,01

 

Repetibilidad permitida [Máx.]

0,03

 

Linealidad

±0,06

 mg

Excentricidad

0,06

 mg

Tiempo de estabilización

5 s (30 s para los filtros)

 

Calibración

interna (automatica)

 

Clase OIML

I

 

Sistema de nivelación

semiautomático - LevelSENSING

 

Pantalla

5,7” resistivo color touchscreen

 

Dimensión de platillo

210×254 mm para filtros + ø90 mm de calado + ø85 mm llena (Opcional)

 

Dimensiones de embalaje

510×865×680

 mm

Masa neto

12,7

 kg

Masa bruto

25

 kg

Grado de protección

IP 43

 

Conectividad

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digitales), Wi-Fi®

 

Alimentacion

100 — 240 V AC 50/60 Hz

 

Temperatura de trabajo

+10 — +50

 °C

La repetibilidad se expresa como una desviación estándar de 10 posiciones de carga.
El tiempo de estabilización depende de las condiciones externas y la dinámica de colocar los pesos en el platillo; especificado para el perfil FAST.
Características
Nivel electrónico

Nivel electrónico

Capacidades funcionale:
- funcion ALARMAS
- indicador de nivel gráfico
- tolerancias programables
Intercambio de datos
(puerto USB)

Intercambio de datos (puerto USB)

actualización de software
exportacion de base de datos de pesaje
exportación / importación de la base de datos
exportacion /importacion de ajustes de balanza
intercambio de los datos entre balanzas
Sensores
infrarrojo

Sensores infrarrojo

Capacidades funcionales:
- funcion PRINT
- funcion TARA
- ajuste de la sensibilidad de sensores
Interfaces

Interfaces

- Ethernet
- 2×USB
- 2×RS 232
- 4 in / 4 out
- WiFi 2,4GHz b,g,n
Vídeos
RADWAG Remote Desktop - Windows 10
RADWAG Remote Desktop
4Y Balances: Video-Guidance and an on-screen manuals
4Y Series RADWAG Balances
Funciones
Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Wi-Fi®

Wi-Fi®

Wi-Fi® offers possibility to send data from balance to a mobile iOS or Android device, via special data management apps. Wireless communication between the indicator and the weighing instrument enables operating the balance that is placed inside a laminar flow hood or a fume cupboard.
Documentación
Tarjetas de productos
Data Sheet


ver

Guardar

Choose more product:
ver Guardar
Manual de usuario
Manual de instrucciones - Bal anzas de la serie 4Y

ver

Guardar
(5.77 MB)
Manual de instrucciones - Radwag-Mass -Node-RED

ver

Guardar
(0.58 MB)
Inicio rápido

ver

Guardar
(8.64 MB)
Declaraciones de conformidad
Conformity Declaration

ver

Guardar
(0.04 MB)
Publicaciones y folletos
Principles of Metrology

ver

Guardar
(0.10 MB)
Detection of vibrations at the electronic balances workstation

ver

Guardar
(2.02 MB)
Sistema THBR 2.0

ver

Guardar
(5.24 MB)
Balanzas de la serie 4Y

ver

Guardar
(24.03 MB)
Micro Scale Measurement

ver

Guardar
(2.74 MB)
Stainless Steel in RADWAG products. Standard and special applications

ver

Guardar
(2.44 MB)
4Y Nueva serie de balanzas de laboratorio

ver

Guardar
(2.03 MB)
SQC in laboratory

ver

Guardar
(2.31 MB)
Perfiles Definidos

ver

Guardar
(1.65 MB)
Gravimetric Methods

ver

Guardar
(7.37 MB)
Accesorios
Mesas antivibratil para balanzas de laboratorio
Mesa de pesaje profesional
Audit Trail Reader
E2R System
Editor de Etiquetas R02
R.Barcode

Accesorios

R-LAB

Accesorios

RAD KEY

Accesorios

RADWAG Connect

Accesorios

RADWAG Development Studio
RADWAG Remote Desktop
Controlador LabVIEW “Radwag Balances & Scales”
Juego para el pesaje de las cargas bajo la balanza
KIT para determinar la densidad
Impresoras de recibos
Impresoras de etiquetas
THBR 2.0 - Indicador de condiciones de ambiente
Cables RS 232, RS 485
Concentradores USB

Accesorios

Convertidor RS 232 a USB
Cables RS 232 (Bascula a Impresora EPSON)

Accesorios

Escáner de códigos de barra
Soportes para filtros y probetas

Accesorios

Pantallas
Adaptadores de corriente
Módulos
Módulo de cumplimiento con 21 CFR parte 113
RADWAG Balanzas Electrónicas
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 60 00
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2022 RADWAG Balances and Scales. All rights reserved.

Selecionar idioma

×
Change language AlbanianAlbanian
Change language DanishDanish
Change language NederlandseNederlandse
Change language EstonianEstonian
Change language FinnishFinnish
Change language HungarianHungarian
Change language IcelandicIcelandic
Change language KazakhKazakh
Change language LatvianLatvian
Change language LithuanianLithuanian
Change language MacedonianMacedonian
Change language NorwegianNorwegian
Change language PortuguesePortuguese
Change language RomanianRomanian
Change language RussianRussian
Change language SlovakSlovak
Change language SlovenianSlovenian
Change language SwedishSwedish
Change language UkrainianUkrainian
Change language SerbianSerbian
Change language MontenegrinMontenegrin
Change language page on Deutsch Deutsch
Change language page on English English
Change language page on Français Français
Change language page on Italiano Italiano
Change language page on Polski Polski
Change language page on Türkiye Türkiye
Česky
Change website to USA USA
Change language page on 中文 中文
Subscribe
Facebook
Youtube
Vimeo
LinkedIn
Webinars
close
close
¿Quieres preguntarnos algo?
Llámanos: +48 48 386 60 00
Responderemos todas tus preguntas.