Español

Productos Novedades Servicios Soporte Noticias Sobre la empresa Contacto

Pagina principal > Productos > Balanzas de laboratorio > Balanzas analíticas > Balanzas analíticas XA 4Y.F > Balanza analíticas XA 110.4Y.F

Balanza analíticas XA 110.4Y.F

Código de producto: WL-107-0089

Simboliza la conformidad del producto con las normas de la Unión Europea, que se aplican al uso de este producto, colocar el marcado CE de un producto es una declaración de la persona responsable de que el producto cumple con las normas generales de seguridad establecidos en las directivas de la marca CE.

El procedimiento en el ámbito de la metrología legal, realizado por la Oficina de Pesos y Medidas, o entidades autorizadas. Para la mayoría de los instrumentos de medida, el procedimiento desde el 1 de mayo de 2004 no se utiliza - sustituyó a la evaluación de la conformidad.

Legalización

El procedimiento en el ámbito de la metrología legal, realizado por la Oficina de Pesos y Medidas, o entidades autorizadas. Para la mayoría de los instrumentos de medida, el procedimiento desde el 1 de mayo de 2004 no se utiliza - sustituyó a la evaluación de la conformidad.

Legalización

2 año de garantía

Preguntar sobre producto

Funciones

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Newton unit measurement

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

Replaceable unit

Replaceable units.

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Las balanzas analíticas XA 4Y.F están equipadas de la pantalla táctil de colores LCD 5,7. Este facto facilita nuevas posibilidades respecto el manejo y visualización de resultados. Pérfiles de usuarios premiten personalizar la balanza. Como estándar las balanzas XA 4Y.A cuentan con el sistema de calibración automática con la masa interna. El control del nivel se realiza con el uso del sistema electrónico LevelSENSING, patentado por RADAWG. Entre las soluciones más avanzadas de estas balanza destaca la posibilidad de supervisón online de las condiciones ambientales gracias al uso de sensores internos y el sensor externo – módulo THB 3. La construcción de la cámara de pesaje permite desarmar los vidrios y a su vez mantener limpieza y esterilidad de los componentes. La función interáctiva de Recetas permite crear diferentes mezclaz de productos con el uso de bases de datos y de manera rápida e infalible. Pesaje diferencial facilita el control de masa de una muestra sometida a diferentes procesos en el tiempo. Extendidas bases de datos permiten registrar todas mediciones y también imprimir y exportarlas. La nueva función de calibración de pipetas aplicada con el uso de un adaptador especial hace de la balanza un dispositivo muy ergonómico que permite calibrar y verificar pipetas de pistón con el método gravimétrico. Gracias al uso de impresiones estándares y modificables por el usuario, existe la posibilidad de preparar documentación requerida por GLP/GMP prácticament en cualquier campo.

Maxima capacidad	110 g
Minima cacacidad	1 mg
Legibilidad [d]	0,01 mg
Rango de tara	-110 mg
Repetibilidad (5% Max)	0,007 mg
Repetibilidad (Max)	0,02 mg
Linealidad	±0,06 mg
Excentricidad	0,06 mg
Desviación de sensibilidad	2×10⁻⁶×Rt
Deriva de sensibilidad de temperatura	1×10⁻⁶/°C×Rt
Estabilidad de sensibilidad	1×10⁻⁶/Ano×Rt
Pesada mínima usp	14 mg
Pesada mínima	1,4 mg
Tiempo de estabilización	5 s (30 s para los filtros)
Deriva de sensibilidad	1ppm/°C en la temperatura +15 - +35 °C
Temperatura de trabajo	+10 - +50 °C
Dimensión de platillo	210×254 mm para los filtros + ø 90 mm de calado + ø 85 mm llena (Opcional)
Alimentacion	13,5 ÷ 16 V DC
Pantalla	5,7'' (panel touchscreen)
Communication interface	2×USB, 2×RS 232, Ethernet, 4entradas/4salidas (digitales), Wireless Connection
Masa	12,7/25 kg
Dimensiones de embalaje	870×510×685 mm
Calibración	interna (automatica)

Documentaciones técnicas

Manual de instrucciones
(5.78 MB) ES

Folleto de producto
(1.21 MB) ES

E2R AUDIT TRAIL CFR21 p.11
(0.18 MB) ES

Declaración de conformidad
(0.04 MB) ES

Publicaciones y materiales didácticos

Perfiles definidos
(1.65 MB) ES

Sistema-THBR-2-0
(5.24 MB) ES

Balanzas de la serie 4Y
(2.52 MB) ES

Medición de Micro Escala
(3.08 MB) ES

4Y - Nueva serie de balanzas de laboratorio
(1.79 MB) ES

Balanza analíticas XA 110.4Y.F

Maxima capacidad: 110g

Legibilidad [d]: 0,01mg

balanza

balanza

Nivel electrónico

Intercambio de datos (puerto USB)

Interfaces

Autotest

Dosing

Percent Weighing

Parts counting

Formulation

Newton unit measurement

Statistics

Checkweighing

IR sensors

GLP Procedures

Animal weighing

Pipettes Calibration

Air density correction

Differential weighing

Replaceable unit

Statistical Quality Control

ALIBI Memory

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

Accesorios

RADWAG Balanzas Electrónicas