zum Vergleich : Waage PS 2500.3Y.PGC

Selected language Deutsch Deutsch
Change language
Change language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Italiano ItalianoChange language page on Polski PolskiChange language page on Türkiye Türkiye ČeskyChange website to USA USAChange language page on 中文 中文

Waage PS 2500.3Y.PGC

Waage PS 2500.3Y.PGC - Die Waage PS 3Y ist mit einem 5,7 LCD Touchscreen-Display ausgestattet, auf dem die Informationen über die aktuell durchgeführte Kontrolle und ihre Ergebnisse angezeigt werden. Jede durchgeführte Kontrolle endet mit einem Protokoll, das auf einem dedizierten Drucker ausgedruckt werden kann
This image is for reference only.

Produktcode: WK-310-0007
Kontaktformular

Beschreibung

Wägebereich [Max]: 2500g
Ziffernschritt [d]: 0,1g

In der

Waage

PS 3Y ist ein Modul verantwortlich für die Kontrolle der gepackten Produkte implementiert, das eine Datenbank mit Produkten und Bedienern nutzt.

Der Kontrollzyklus verläuft nach dem nachfolgenden Schema:
  • Auswahl des Produkts
  • Auswahl des Bedieners
  • Start der Kontrolle
  • Wägen
  • Automatischer Abschluss der Kontrolle nach dem Wägen einer bestimmten Anzahl der Pakete
  • Druck des Kontrollprotokolls.
Die

Waage

PS 3Y ist mit einem 5,7" LCD Touchscreen-Display ausgestattet, auf dem die Informationen über die aktuell durchgeführte Kontrolle und ihre Ergebnisse angezeigt werden. Jede durchgeführte Kontrolle endet mit einem Protokoll, das auf einem dedizierten Drucker ausgedruckt werden kann. Die Waage kann mit Hilfe einer an die Schnittstelle der Waage angeschlossenen PS/2-Tastatur bedient werden.

Videos

RADWAG Remote Desktop - Windows 10
RADWAG Remote Desktop

Merkmale

Elektronische Libelle
Funktionalität:
  • ALARM
  • graphische Nivellierungsanzeige
  • programmierbare Toleranzen

Elektronische Libelle

Funktionalität:
  • ALARM
  • graphische Nivellierungsanzeige
  • programmierbare Toleranzen
Datenaustausch (USB)
  • Softwareupdates
  • Export von Wägedaten
  • Export/Import von Datenbanken
  • Export/Import von Waageneinstellungen
  • Datenaustausch zwischen Waagen

Datenaustausch (USB)

  • Softwareupdates
  • Export von Wägedaten
  • Export/Import von Datenbanken
  • Export/Import von Waageneinstellungen
  • Datenaustausch zwischen Waagen
Infrarotsensoren
Funktionalität:
  • PRINT-Funktion
  • TARA-Funktion

Infrarotsensoren

Funktionalität:
  • PRINT-Funktion
  • TARA-Funktion
Kabellose Kommunikation
Optionale Ausführung:
Kabellose Kommunikation der Wägekammer mit dem Terminal.

Kabellose Kommunikation

Anwendung:
1. Beseitigung von zusätzlichen Vibrationsquellen Ein Standort des Terminals außerhalb des Wägetisches beseitigt Vibrationen, die bei der Bedienung entstehen. Dies ermöglicht einen stabilen Betrieb bei höchsten Auflösungen ohne Anwendung von speziellen Wägearbeitsplätzen.
2. Bequemes und komfortables Wägen unter Abzügen und auf Sicherheitswerkbänken Die kabellose Kommunikation des Terminals mit dem Wägemodul ermöglicht den Betrieb der Laborwaage unter Abzügen, ein bequemes Arbeiten und mehr Sicherheit.
3. Isolation der Waage von ungünstigen Umgebungsbedingungen Die kabellose Kommunikation ermöglicht das Aufstellen des Wägemoduls in Windschutzschränken oder eine vollständige Isolation vom Bediener. Diese Lösung ermöglicht das Wägen von kontaminierten oder toxischen Substanzen ohne Gefahr für die Gesundheit des Bedieners.
Interfaces
  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n

Interfaces

  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n

Funktionen

Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
Packaged Goods Control

Packaged Goods Control

Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carry out control and generate PGC reports. Different types of weighing instruments can be combined into a network. The control can be started on a balance or via computer software. It is automatically finished after a respective quantity of packages is verified.
Collected data allows you to assess quality of produced pre-packaged goods and their conformity with:
- internal quality control system;
- 'Pre-Packaged Goods' regulation of 7th May 2009 (Journal of Laws No 91, item 740), on the requirements concerning quantity inspection of pre-packaged goods control, which inspection is to be carried out by means of random selection of the measurements results and sending those results to pre-packaged goods control procedure.

Technische Daten

Wägebereich [Max]

2500

 g

Min. Belastung

5

 g

Ziffernschritt [d]

0,1

 g

Tarierbereich

-2500

 g

Justierung

intern (automatisch)

 

Display

5,7” resistiv farbiger touchscreen

 

Schnittstelle

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

 

Stromversorgung

100 ÷ 240 V AC 50 / 60 Hz

 

Umgebungstemperatur

+15 ÷ +30

 °C

Waagschale

195×195

 mm

Dokumentation

Technische Dokumentation
Publikationen und Lerninhalte
Bedienungsanleitungen
(4.37 MB)
Save See the publication
Data Sheet
(0.67 MB) EN
Save See the publication
Conformity Declaration
(0.04 MB) EN
Save See the publication
Defined Weighing Profiles
(1.36 MB) EN
Save See the publication
THBR System 2.0
(5.17 MB) EN
Save See the publication
FPVO Waagen
(0.85 MB)
Save See the publication

Zubehör

Antivibrationstische für Idustriewaagen
Audit Trail Reader

Zubehör

E2R System
Etiketten Editor R02
Datenbasen-Editor 3Y
Parametereditor
R.Barcode

Zubehör

Produktname

Beschreibung

R.Barcode

R-LAB
RAD KEY
RADWAG Development Studio
RADWAG Remote Desktop
LabVIEW Driver
Dichtebestimmungsset
Thermische Drucker
Etikettendrucker
Umgebungsbedingungen-Messgeräte THBR 2.0 System

Zubehör

Produktname

Beschreibung

Modul THB P

...

Modul THB S

...

Schutzhauben
Kabel RS 232 (Waage – Drucker EPSON)
Kabel RS 232RS 485
Anschlusskabel für Zigarettenanzünder
Barcodescanner
Waagenkoffer
Displays
Netzteile

RADWAG Elektronische Waagen

Torunska 5
26-600 Radom
Polen
Tel.: +48 48 386 60 00
E-mail: export@radwag.com
VAT Nr.: 796-000-03-27
Vimeo Radwag YouTube Radwag Facebook Radwag
© 2019 RADWAG Elektronische Waagen. Alle Rechte vorbehalten.

Watch more
RADWAG videos

movie
Radwag WEBINARS