zum Vergleich : Präzisionswaage WLC 21.X2

Selected language Deutsch Deutsch
Change language
Change language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Italiano ItalianoChange language page on Polski PolskiChange language page on Türkiye Türkiye ČeskyChange website to USA USAChange language page on 中文 中文

Präzisionswaage WLC 21.X2

Präzisionswaage WLC 21.X2 - Für maximalen Arbeitskomfort werden in der X2 Waagenserie kapazitive Oberflächen Touchscreens der neusten Generation verbaut. Einfache Handhabung, übersichtliches Menü sowie eine intuitive Darstellung der Informationen sorgen für eine komfortable Bedienung
This image is for reference only.

Produktcode: WL-222-0013
Kontaktformular

Beschreibung

Wägebereich [Max]: 21kg
Ziffernschritt [d]: 1g

WLC.X2- hoch entwickelte, innovative Präzisionswaagen.
Für maximalen Arbeitskomfort werden in der X2 Waagenserie kapazitive Oberflächen Touchscreens der neusten Generation verbaut. Einfache Handhabung, übersichtliches Menü sowie eine intuitive Darstellung der Informationen sorgen für eine komfortable Bedienung.

Die X2

Waage

nutzt ein einzigartiges und innovatives System, dass mit einer Funktion zur Personalisierung des Informationssystems mit Hilfe von Widgets ausgestattet ist. Die Personalisierung des Displays der X2

Waage

ermöglicht den direkten Zugriff auf Informationen und Arbeitsergebnisse vom Hauptbild.
Gängige Schnittstellen ermöglichen die Auswahl der optimalen Kommunikation: 2 x RS-232, USB-A, USB-B und Wireless-Module.
Das Gehäuse besteht aus Kunststoff und die Waagschale aus Edelstahl.

Datenbanken der X2-Waagen
Das Informationssystem der neuen X2

Waagen

Serie basiert auf 7 Datenbanken, die mehreren Benutzern Zugriff auf die Warendatenbank ermöglicht, alle gespeicherten Daten können ausgewertet werden. Abspeichern der Daten in 7 Datenbanken:
  • Benutzer (bis zu 100 Einträge),
  • Waren (bis zu 5.000 Einträge),
  • Wägungen (bis zu 50.000 Einträge),
  • Verpackungen (bis zu 100 Einträge),
  • Rezepturen (bis zu 100 Einträge),
  • Kunden (bis zu 100 Einträge),
  • ALIBI-Speicher (bis zu 500.000 Wägungen).
Zusätzlich können Protokolle in 2 Kategorien erstellt werden:
  • Rezepturprotokolle (bis zu 200 Protokolle),
  • Protokolle aus der Dichtemessung (bis zu 500 Protokolle).
Datenmanagement
Über die USB Schnittstelle können Arbeitsergebnisse an einen Rechner bzw. eine andere Waage schnell übertragen und kopiert werden (Messungen, Protokolle, Datenbanken). Das Datenmanagement der Waage kann auch online mit Hilfe des Fernzugriffs zur Waage und ihrer Datenbanken erfolgen.

ALIBI-Speicher
Alle X2

Waagen

sind mit einem eichfähig zugelassenen ALIBI-Speicher ausgestattet, der für die Sicherheit und die automatische Erfassung der Messungen sorgt, sowie die Einsicht, das Kopieren und das Archivieren der Daten ermöglicht. Im ALIBI-Speicher können bis zu 500.000 Wägungen erfasst werden.

Videos

X2 Balances: STATISTICS - Working modes: part 8

Funktionen

Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
Under-pan weighing

Under-pan weighing

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Density determination

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of  under-pan weighing. Tested load of significant size may be measured this way.
Ambient conditions monitoring

Ambient conditions monitoring

The possibility of cooperation with the THBR 2.0 system
Replaceable unit

Replaceable unit

Replaceable units.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.
Mass for titrator

Mass for titrator

'Mass value for a titrator' working mode enables establishing connection between the weighing device and a titrator. The titrator receives information about the quantity of dispensed mass, and the weighing instrument receives a signal to start subsequent weighing.

Technische Daten

Wägebereich [Max]

21

 kg

Ziffernschritt [d]

1

 g

Tarierbereich

-21

 kg

Wiederholbarkeit

0,8

 g

Linearität

±3

 g

Stabilisierungszeit

3

 s

Justierung

extern

 

Display

5" kapazitiv farbiger touchscreen

 

Datenbasis-Größe

7

 

Schnittstelle

2×RS232, USB-A, USB-B, Ethernet, Wi-Fi®

 

Stromversorgung

100 ÷ 240 V AC 50 / 60 Hz

 

Umgebungstemperatur

+10 ÷ +40

 °C

Waagschale

195×195

 mm

Verpackungsgröße

470×380×336

 mm

Nettogewicht

2,2

 kg

Bruttogewicht

3,8

 kg

Wiederholbarkeit wird als Standardabweichung von 10 Wägezyklen ausgedrückt.
Die Stabilisierungszeit ist abhängig von den Umgebungsbedingungen und der Geschwindigkeit bei Auflegen der Last auf der Waagschale; für FAST-Profil definiert.

Dokumentation

Technische Dokumentation
Publikationen und Lerninhalte
Bedienungsanleitungen
(3.23 MB)
Save See the publication
Produktfolder
(1.47 MB)
Save See the publication
Conformity Declaration
(0.04 MB) EN
Save See the publication
Defined Weighing Profiles
(1.36 MB) EN
Save See the publication
Direkte Kommunikation Waage-PC
(0.32 MB)
Save See the publication
X2 Laborwaagen
(1.53 MB)
Save See the publication
Waagen der Serie X2
(1.74 MB)
Save See the publication

Software

Drivers
Software

ALIBI Reader (41.74 MB)

Zubehör

ALIBI Reader
E2R System
R.Barcode

Zubehör

Produktname

Beschreibung

R.Barcode

R-LAB
RAD KEY
RADWAG Development Studio
LabVIEW Driver
Thermische Drucker
Kabel RS 232 (Waage – Drucker EPSON)
Kabel RS 232RS 485
USB-Kabel (Waage – Drucker)
Anschlusskabel für Zigarettenanzünder
Schutzhauben
Barcodescanner
Waagenkoffer
Displays
Netzteile

RADWAG Elektronische Waagen

Torunska 5
26-600 Radom
Polen
Tel.: +48 48 386 60 00
E-mail: export@radwag.com
VAT Nr.: 796-000-03-27
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2019 RADWAG Elektronische Waagen. Alle Rechte vorbehalten.

Watch more
RADWAG videos


movie
Radwag WEBINARS