zum Vergleich : Mikrowaage XA 21/52.4Y.M.A.P PLUS

Selected language Deutsch Deutsch
Change language
Change language page on English EnglishChange language page on Español EspañolChange language page on Français FrançaisChange language page on Italiano ItalianoChange language page on Polski PolskiChange language page on Türkiye Türkiye ČeskyChange website to USA USAChange language page on 中文 中文

Mikrowaage XA 21/52.4Y.M.A.P PLUS

Mikrowaage XA 21/52.4Y.M.A.P PLUS - RADWAG Elektronische Waagen ist ein führender Hersteller von modernen elektronischen Waagen und Zubehören für viele Industriezweige in Polen und in der Welt.
This image is for reference only.

Produktcode: WL-101-1057
Kontaktformular

Beschreibung

Wägebereich [Max]: 21 / 52g
Ziffernschritt [d]: 1 / 5µg

XA 4Y.M.A.P PLUS microbalances feature modern design that enables high accuracy and fast measurements.
They are equipped with reliable measuring system housed in a hermetic casing, this guarantees fast and precise measurement in almost any laboratory conditions. External factors such as air drafts, dust, vibrations, employee competences, generate disturbances that influence the final result of the measurement.
RADWAG-manufactured

balances

are equipped with range of protections designed to eliminate errors (hermetic

weighing

chamber, filters dampening vibrations), and tools informing about errors occurrence (vibration sensor, electronic levelling device, ambient conditions module).

The antistatic ionizer, an in-built component of XA 4Y.M.A.P PLUS microbalance, neutralizes electric charges inside the

weighing

chamber, more precisely it neutralizes uncompensated electric charge accumulated on weighed object. The lower relative humidity and a reading unit of the balance, the more evident influence of static electricity. The influence of static electricity gives greater repeatability error, often also greater error of indication.
Measurement errors, due to the harmful effects of electrostatics, often reach the value of thousands of reading units and more. The problem concerns non-conductive samples, e.g. glass flasks, paper filters, plastics, etc.
Implemented in the XA 4Y.M.A.P PLUS microbalance antistatic ionizer is a modern technology solution which compensates both cations and anions. The ionizer activates when the microbalance door opens, and deactivates when the door is closed. It is possible to control ionizer operation using weighing instrument panel. The operation is signalled by blue LED diode which emits light when the ionizer is on.

The microbalance features modern hardware and software architecture. Integrated software, Windows Embedded Compact 7, Flash memory, Double Hardware System guarantee speed and reliability when it comes to collecting and processing information. The XA 4Y.M.A.P PLUS series is equipped with LCD 5.7" colour touch screen facilitating device operation and presentation of the results. Complex databases enable users to register, print and export measurements. The

balance

system supports 13 languages.

'Defined profiles' is a new function, it automatically sets weighing instrument's parameters in accordance with user requirements.
Profiles:
  • FAST – the measurement result is obtained in a very short time
  • FAST DOSING – the

    balance

    quickly reacts to

    mass

    changes, especially useful for dosing or adding more product to the dispensed portion
  • PRECISION - balance settings providing the minimum standard deviation sd ≤ 1.5 μg,
  • OPERATOR - customization of the parameters in accordance with operator's requirements.
XA 4Y.M.A.P PLUS microbalance is an optimized modern device which among many functions features an option of automatic level control (Level SENSING).

The innovative system for weighing chamber's door opening and closing guarantees smooth and quiet door movement, and eliminates vibrations that may disturb the measurement. The solution enables to define how wide the door is to be opened.

Customization option is based on individual operators' profiles and permissions levels that limit the access to the weighing instrument's menu. Programmable proximity sensors offer wide range of possibilities: zeroing, taring, printing and more.

Numerous functions, such as differential weighing enable multi-step

mass

control of the same sample subjected to different processes.

The software security system and the ability to document the process using printouts (standard/non-standard) ensures compliance of the weighing instruments with GLP/GMP systems in almost every area (pharmacy, petrochemistry, environment protection and many others).

CAUTION:
In order to carry out the weighing process by means of microbalances and ultra-microbalances correctly, it is necessary to prepare the workstation and to operate the device as required.
Usage and installation guidelines are to be found in the following document: Installation and usage conditions for ultra-microbalances and microbalances.

Videos

New XA 4Y.A.I and XA 4Y.M.A.I Balances
Automatic Adapter for Pipettes Calibration
XA 4Y.M.A Microbalance
4y series - Ultra-microbalances and microbalances
RADWAG Remote Desktop - Windows 10
RADWAG Remote Desktop
4Y Balances: Video-Guidance and an on-screen manuals

Merkmale

Datenaustausch (USB)
  • Softwareupdates
  • Export von Wägedaten
  • Export/Import von Datenbanken
  • Export/Import von Waageneinstellungen
  • Datenaustausch zwischen Waagen

Datenaustausch (USB)

  • Softwareupdates
  • Export von Wägedaten
  • Export/Import von Datenbanken
  • Export/Import von Waageneinstellungen
  • Datenaustausch zwischen Waagen
Infrarotsensoren
Funktionalität:
  • PRINT-Funktion
  • TARA-Funktion

Infrarotsensoren

Funktionalität:
  • PRINT-Funktion
  • TARA-Funktion
Kabellose Kommunikation
Optionale Ausführung:
Kabellose Kommunikation der Wägekammer mit dem Terminal.

Kabellose Kommunikation

Anwendung:
1. Beseitigung von zusätzlichen Vibrationsquellen Ein Standort des Terminals außerhalb des Wägetisches beseitigt Vibrationen, die bei der Bedienung entstehen. Dies ermöglicht einen stabilen Betrieb bei höchsten Auflösungen ohne Anwendung von speziellen Wägearbeitsplätzen.
2. Bequemes und komfortables Wägen unter Abzügen und auf Sicherheitswerkbänken Die kabellose Kommunikation des Terminals mit dem Wägemodul ermöglicht den Betrieb der Laborwaage unter Abzügen, ein bequemes Arbeiten und mehr Sicherheit.
3. Isolation der Waage von ungünstigen Umgebungsbedingungen Die kabellose Kommunikation ermöglicht das Aufstellen des Wägemoduls in Windschutzschränken oder eine vollständige Isolation vom Bediener. Diese Lösung ermöglicht das Wägen von kontaminierten oder toxischen Substanzen ohne Gefahr für die Gesundheit des Bedieners.
Interfaces
  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n

Interfaces

  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n
Abnehmbare Wägekammer
Die Wiegekammer kann ohne Werkzeug komplett zerlegt werden

Abnehmbare Wägekammer

  • Voll zerlegbare Elemente der Wägekammer
  • einfache und schnelle Demontage ohne Werkzeug
  • Schnappverschluss- System der Befestigung von Elementen der Wägekammer
  • leicht zu reinigen und sauber zu halten
Innovatives 2-Punkt-Justierungssystem
Garantie für höchste Messgenauigkeit.

Innovatives 2-Punkt-Justierungssystem

Dies ermöglicht es Ihnen, zuverlässige  Ergebnisse im vollen Wägebereich zu bekommen.
Reflex Level System
Vollautomatisches Nivellieren von Waagen.

Reflex Level System

Neues Auto- Nivellierung System der Waage PLUS gewährleistet :
  • Test der Neigung des Bodens,
  • Vollautomatische Nivellierung der Waage,
  • Überprüfung der richtigen Nivellierung der Waage,
  • Bestätigung der Nivellierung der Waage in den Berichten von Justierung und Wiegen
Antistatische Wiegekammer
Eingebauter Ionisator und spezielle Beschichtung des Glases.

Antistatische Wiegekammer

Der antistatische Ionisator stellt das Gleichgewicht der elektrischen Ladungen in der Wägekammer wieder her, nachdem die gewogene Probe darin platziert wurde.
Smart Min Weight
Mindestgewicht ist bis zu 30% besser.

Smart Min Weight

Die Waage PLUS passt automatisch die Auflösung des Wägebereichs an das gewogene Gewicht an.
Konformität von 21 CFR Teil 11
Reihe von Funktionen zum Schutz und zur Überwachung der Arbeit an der Waage.

Konformität von 21 CFR Teil 11

Der vollständige Datenschutz erfolgt durch:
  • erweiterte Passworteinstellungen,
  • Überprüfung der korrekten Anmeldung,
  • Zuordnung  von  individuellen  Berechtigungen  an die Bediener
  • automatische Abmeldung
  • elektronische Unterschrift z.B. von Wägeserien
  • Zugriffseinstellungen für die Datenverwaltung
  • Sicherungskopie der Daten
  • Speichern von Änderungen in der Audit Trail-Datei
Druckausgleichssystem
Beseitigung von Fehlern, die durch Druckänderungen entstehen.

Druckausgleichssystem

Beseitigung von Fehlern, die durch Druckänderungen entstehen.
Hinterleuchtung der Waageschale
Richtdiode, die die Temperatur in der Wiegekammer nicht beeinflusst.

Hinterleuchtung der Waageschale

Richtdiode, die die Temperatur in der Wiegekammer nicht beeinflusst.

Funktionen

Autotest

Autotest

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
Dosing

Dosing

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Percent Weighing

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Formulation

Formulation

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Statistics

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
IR sensors

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
GLP Procedures

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
Pipettes Calibration

Pipettes Calibration

Function verifying correctness of piston pipettes functioning, the verification is performed via gravimetric measurement of the excreted liquid. Pipettes calibration may be either a stand-alone module or it may be operated
Air density correction

Air density correction

Function performing correction of mass measurement indication, wherein the air density is taken into account. It is used in balances with reading unit < 0,01 mg.
Automatic sliding door

Automatic sliding door

Automatic side panes opened via touch-free IR sensors.
Moveable range

Moveable range

Dual range analytical balances can be equipped with much more precise measuring range but only in very limited part of max capacity and only from zero load. A new technology introduced by RADWAG allows for moving this limited range till max capacity of the balance is reached. Such solution has been named as: Moveable range.
Differential weighing

Differential weighing

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Replaceable units.
Statistical Quality Control

Statistical Quality Control

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
ALIBI Memory

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Technische Daten

Wägebereich [Max]

21 / 52

 g

Min. Belastung

0,1

 mg

Ziffernschritt [d]

1 / 5

 µg

Tarierbereich

-52

 g

Garantierte Wiederholbarkeit [Max]

8

 µg

Garantierte Wiederholbarkeit [5%]

2,4

 µg

Standard Wiederholbarkeit [Max]

6

 µg

Standard Wiederholbarkeit [5% Max]

1,8

 µg

Linearität

±20

 µg

Exzentrizität

20

 µg

Min. Einwaage (U=1%, k=2)

0,36

 mg

Min. Einwaage (USP)

3,6

 mg

Stabilisierungszeit

~ 3,5

 s

Justierung

intern (automatisch)

 

OIML-Klasse

I

 

Display

5,7” resistiv farbiger touchscreen

 

Schnittstelle

2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®

 

Stromversorgung

100 ÷ 240 V AC 50 / 60 Hz

 

Maximaler Leistungsaufnahme

700 mA (kabelloser Terminal - 1A)

 

Umgebungstemperatur

+10 ÷ +40

 °C

Relative Luftfeuchtigkeit

40% ÷ 80%

 

Wägekammer

199×170×217

 mm

Waagschale

ø26

 mm

Verpackungsgröße

720×385×485

 mm

Nettogewicht

14,5

 kg

Bruttogewicht

18,9

 kg

Wiederholbarkeit wird als Standardabweichung von 10 Wägezyklen ausgedrückt.
Die Stabilisierungszeit ist abhängig von den Umgebungsbedingungen und der Geschwindigkeit bei Auflegen der Last auf der Waagschale; für FAST-Profil definiert.

Dokumentation

Technische Dokumentation
Publikationen und Lerninhalte
Bedienungsanleitungen
(5.49 MB)
Save See the publication
Data Sheet
(1.67 MB) EN
Save See the publication
Data Sheet
(0.18 MB) EN
Save See the publication
Conformity Declaration
(0.04 MB) EN
Save See the publication
XA 4Y.M.A PLUS Microbalances
(4.09 MB) EN
Save See the publication
Defined Weighing Profiles
(1.36 MB) EN
Save See the publication
THBR System 2.0
(5.17 MB) EN
Save See the publication
Microbalances for Pipettes Calibration
(1.26 MB) EN
Save See the publication
Detection of vibrations at the electronic balances workstation
(2.02 MB) EN
Save See the publication
4Y - Neue Serie Der Laborwaagen
(1.76 MB)
Save See the publication
Waagen der Serie 4Y
(2.35 MB)
Save See the publication
Ultra-Mikrowaagen und Mikrowaagen
(1.67 MB)
Save See the publication
Micro Scale Measurement
(2.74 MB) EN
Save See the publication
Principles_of_metrology
(0.10 MB) EN
Save See the publication
Guidelines for a weighing room for correct microbalance and mass comparator operation
(0.82 MB) EN
Save See the publication
SQC in laboratory
(2.31 MB) EN
Save See the publication
Microbalances working conditions
(2.25 MB) EN
Save See the publication

Zubehör

Granit-Antivibrationstisch
Antivibrationstische für Laborwaagen
Professioneller Wägetisch
PC-Software "Pipettes"
Audit Trail Reader

Zubehör

E2R System
Etiketten Editor R02
Parametereditor
R.Barcode

Zubehör

Produktname

Beschreibung

R.Barcode

R-LAB
RAD KEY
RADWAG Development Studio
RADWAG Remote Desktop
LabVIEW Driver
Thermische Drucker
Etikettendrucker
Umgebungsbedingungen-Messgeräte THBR 2.0 System

Zubehör

Produktname

Beschreibung

Modul THB P

...

Modul THB S

...

Kabel RS 232RS 485
Kabel RS 232 (Waage – Drucker EPSON)
Schutzhauben

Zubehör

Barcodescanner
Windschutzschrank für XA 4Y Waagen
Displays
Netzteile

Zusätzliche Module

Modul der Konformität mit 21 CFR Teil 113

RADWAG Elektronische Waagen

Torunska 5
26-600 Radom
Polen
Tel.: +48 48 386 60 00
E-mail: export@radwag.com
VAT Nr.: 796-000-03-27
Vimeo Radwag YouTube Radwag Facebook Radwag LinkedIn Radwag
© 2019 RADWAG Elektronische Waagen. Alle Rechte vorbehalten.

Watch more
RADWAG videos


movie
Radwag WEBINARS